Special repairing of various electrical fittings fixtures at New DRS Building Ground and 1st floor and RHTO office attached to DRS building, Berhampore in the district of Murshidabad.

Amount

S & D of 450 mm or 18” Industrial Heavy Duty (1440 RPM) Exhaust Fan (Crompton/Orient/Usha ) [EXHD 450-4-1]

Fixing only 18 '' exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter. [Page No. C-4/Sl. No.28(d)]

Supply of 4ft long Single LED tube light fittings complete with all accessories [PHILIPS ]. TMC 100 1 x T LED 13 - 20 W

Supply & fixing of only 4ft, 250V, 20W MAS LED tube lamp Cat No. 1200mm 18W865 T8 I-2100Lm. Incl all accessories philips in place of conventional flurocent light fittings. ( P C Body )

Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length.[Page No. C-2/Sl.No. 17]

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core\ stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20 mm size PVC rigid conduit 'FR' , with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl.175mmx 100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish (Avg run 8 mtr) [Page No. E-14/SL. No. 2(c)]

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. ( Existing 25 = New 5 ) [Page No. E-6/ Sl. No. 18(a)]

S&F of 9W LED Lamp on existing angle batten Holder.(Philips)

Supply and fixing of Angle/ Batten Holder. [Page No. D-13/ Sl. No. 22]

Supply and fixing 2 way S S enclouser with 16 A DP MCB (Legrand) fixed in it flushed in wall and connection of the connecting wire.[Page No. D-6/Sl.No. 7 & Page No. D-9/Sl.No. 11]

Supply and fixing of single phase 240 volt MUG 10 (L&T make) submersible pump motor starter on flat iron frame on wall including necessary connection as required. (MU-G 10 DOL - 5HP)

Supply and fixing of 240 volt 5 Amp piano key type switch, Make- Anchor (Page No. E-5/SL. No. 14a)

Repairing of existing LED glow sign board

Supply & delivery of 230V 4ft LED light fittings complete with all allied accessories, LED tube light , Incl necy connections. single tube fitting (Philips Cat No-TMC501 P 1 x TLED)with one nos essectial LED tube 1200 mm 18W

Supply & delivery of 230V 4ft LED double light fittings complete with all allied accessories, LED tube light , Incl necy connections. double tube fitting (Philips Cat No-TMC501 P 2 x TLED)with two nos essectial LED tube 1200 mm 18W

Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length. [Page No. E-6/SL. No. 18(a)]

Supply & Fixing of 1200mm (48 inch) sweep AC ceiling fan complete with all accessories. blades, canopy, fork, rubber bush etc.

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling including supply and fixing of 09 watt LED blub, Make- Philips.[Page No. D-13/Sl.No. 22]

Supply and fixing of 240 volt 230 mm/ 9" exhust fan, Make- EPC Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for 9" exhaust. Supply & Fixing AI louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long). [Page No. C-4/Sl.No. 28(a) & SL. No. 30(a)] (Annalysis Attached) (Annexure -I/ SL. No. 9)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. [Page No. E-6/Sl.No. 18(a)]

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. Avg run 8 mtr.[Page No. E-14/SL.No. 2]

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. ( For Geyser).[Page No. E-6/ SL. No. 22]

Providing CC (6:3:1) muffing (600 x 600 x 760) mm in size around the pole base complet with 3 mm thick neatly finished cement plaster all sides with (250 x 250 x 100) mm 16 SWG GI Loop Box having 4way connector 15A fuse unit etc.accessories. [Page No. I-1/SL. No. 12(b)]

S/F 40 mm dia 1.5 mtr long single arm bracket as per direction of the E.I.C

S/F 250 Volt 90 watt LED outdoor type street light Fittings complete ( Philips / Crompton / Wipro make) (BRP 0333 LED 90 CW SLR GR PSU SPA)

S & drawing 1.1 KV grade single core stranded 'FR' PVC insulated unshethed Cu. Wire (approved make) in suitable size13 mm / 19 mm /25 mm dia 3 mm thick polythene pipe embedded in wall (approved make) ( 2 x 2.5 + 1x 1.5) Sqmm.[Page No. E-3/ Sl.No. 6a + Page No. E-9/Sl.No. 1(s)]

Supply and fixing of 240 volt 16 Amp MF 1 starter make- L&T on flat iron fame on wall.

SANJIB GHOSH

BHATTACHARYYA ENTERPRISE