11KV temporary Power Supply Arrangement to Laikera Railway Siding from Existing TPWODL Feeder Kulda OCP, Basundhara Area.

Amount

Cost of 11mtrs long 150x150 mm RS JOIST pole & 34.6KG/MT or 380.60kg /pole

Supply of 11/0.415KV, 25KVA distribution transfomrer, Dyn11, BIS LEVEL 2, STAR RATING 1 IS MARKED, WITH A MINIMUM GUARANTEE OF 18 MONTHS.IMP-(AGENCY HAS TO TAKE NEEDFUL APPROVAL FROM TPWODL BEFORE SUPPLY OF TRANSFORMER AT SITE, COMPLETE ALL THE FORMALITIES AS PER THE TERMS AND CONDITIONS OF TPWODL AND TAKING APPROVAL OF HT LINE ETC. FROM ELECTRICAL INSPECTOR OF ODISHA) Capacity-25KVA, Outdoor type, Input voltage-11kV, output voltage-0.415kV, Input configuration-delta, Output configuration-star, Cooling-ONAN, Max. ambient temp-50 deg celcius, max oil tempreture rise-50deg celcius, max. winding temp-50deg celcius

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Supply and erection of galvanised stay set for 11 KV over head lins complete with 19/20 mm dia x 1.8 metres long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm x 600 mm), 7/10 SWG G.I. saty wire and 11 KV strain insulator etc in cement cocrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) V shape cross arm for two 11 KV over head line conductors complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as rea u i red

Supplying of 50 mm X 8 mm M.S. flat iron pole top bracket/ cross arm for single 11/22/33 KV over head line conductor complete with fixing clamps, bolts, nuts and washers drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required

Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/ 33 KV as required.

Provbing and fixing of HT Danger notice plate of 250mmx250mm ,made of mild steel ,at least 2 mm thick and vitreous enamelled on both side ,and with inscription with single red colour in front sideet. as required

Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.

Supplying of two length of channel iron 75 mm X 40 mm X 6 mm ( 7.14kg per metre) double pole cross arm for three wire 11 KV over head line conductors. complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc and painting with primer and finish paint as required.

Erection of double pole 3 wire cross arm for 11kV/22kV/33kV overhead line as required

Supply and Erection of 11 KV X 3 Post Insulator per Phase, 200 Amp, Double Break G.O.A.B. Switch/Isolator Horizontal Type

Supplying and Erection of Horn gap fuse/ Drop out fuse per IS9358/1980, 11KV X 2 Pin Insulator per phase, 200 Amp, On M.S. Chhannel Iron Platfom.

Inrtallation of transformer 11/0.415kv , 25 KVA on plinth complete with connection,testing ,commiossioning etc as reqd as per direction of EIC(lugs socket etc supplied by the contractor)

Derieved analysis fo Earthing with G.l. earth pipe 3.0 eter long, 40 mm dia including accessories, andproviding asonry enclosure with cover plate Jlaving locking rangement andwatering pipe etc. with charcoal/coke and salt as required.Details of cost for one Set

Supplying and erection of three piece nonlinear resistor type lightning arrestorsuitable for 3 wire, 11 kV overhead lines with rated voltage 12 kV (rms) with a nominaldischarge current rating of 10kA and complete with galvanised clamping rangement,G.l. bolts, nuts, washers etc. as required.

Supplying of 11KV Gr, 3Core 35 sqmm XLPE AL Armoured cable

Supplying and making outdoor heat shrinkable jointing kit for 3C X35 SQMM 11KV , XLPE aluminium conductor cable as required

Tapping arrangement for XLPE cable on 11kV line (except cost of pole)

Intermediate arrangement for XLPE cable on 11KV line (except cost of pole)

Erection of 34sqmm cable with supporting with AAAC conductor

G.l Barbed wire Fencing ,'8 metre highProviding and fixing 'l -8 metres high Gl barbed wire (weighing 9'38 kg per 100 mts')fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metrescenter to center founded in M15 grade cemenl concrete, 0.5 metre below ground level,every 15th post, last but one end posl and corner posl shall be strutted on both sidesand end posl on one side only and provided with '12 horizontal lines and 2 diagonalsinteMoven with horizontal wires, lixed with Gl staples, turn buckles etc complete as clause 808

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

m/s BHARATI ELECTRICALS (PROP-BHARATI NAIK)

DO INFRA AND POWER PRIVATE LIMITED