Repairing and Renovation Work in Office of The Town Planning Officer At Modasa Taluka : Modasa District : Arvalli

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

1 Dismentaling tiled of stone floors laid in 20.00 49.18 Sq.Mt

mortar including stacking of serviceable

materilas and disposal of unserviceable

materials with all lead and lift.

2 Dismentling doors, windows, ventilators etc. 2.00 191.85 No.

(wood or steel) shutters including chowkhats

architraves, holdfasts and other attachment

etc. complete and stacking them within all

lead and lift.(i) Not exceeding 3 Sq.M. in

3 Providing laying and jointing in true line and 25.00 195.67 Rmt

level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concelled as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

materials.

4 Providing laying and jointing in true line and 32.00 148.12 Rmt

level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concelled as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

materials.

5 Providing laying and jointing in true line and 48.00 91.84 Rmt

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concelled as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

materials.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

6 Providing laying and jointing in true line and 48.00 72.65 Rmt

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concelled as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

materials.

7 Providing, laying and jointing in true line and 6.00 876.11 Rmt

level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe

line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh

at every 2000 mm center to center or shall

be concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement

including cost of all materials.

8 Providing and fixing in PVC SWR cowel 1.00 252.50 No

went 110mm dia to pipes.(B) 110mm dia.

9 Providing and fixing wash down water closet 1.00 3055.25 No

(European type W C pan) with integral P and

S trap including jointing the trap with soil pipe

in cement mortar 1:1 (1 cement five sand)

including providing and fixing plastic seat

cover for wash down WC with CP brass

hinges and rubber buffers back plastic seat

and including providing and fixing PVC

flushing tank with a pair of C I or MS bracket

with complete fitting such as lead valve

siphon 15 mm dia brass ball valve with

polythene float CP brass handle unions and

couplings for connection with inlet out let and

over flow pipes 40 mm dia porcelain

enameled flush bend including cutting holes

in walls and making good the same

connection the flush bend with cistern and

closet vitreous china.

10 Providing and fixing brass screw down stop 2.00 205.83 No

tap.(A) 15mm dia.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

11 Providing and fixing ball cock of approved. 2.00 189.84 No

quality as directed.(A) Copper Metal (ii)

12 Providing and fixing pillar tap, capstan head, 1.00 308.73 No

screw down high pressure with screws,

shanks and back nuts. (i) 15mm dia.

13 Providing and fixing chromium plated brass 2.00 263.77 No

half trun flush cock of approved quality

including fixing in pipe line etc. complete (ii)

14 Providing 15 mm thick double coat mala 20.00 290.39 Sq.Mt

cement plaster on interior brick / concrete

work for plastering comprising of base coat

of 12 mm thick cement plaster in cement

mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement

mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding

curing, 10x10 mm grooves etc. complete.

For Floor Two Level

15 Providing and laying Ceramic tiles 6mm thick 5.00 994.37 Sq.Mt

in flooring treads of steps and landing laid on

a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush

pointing in white cement.

16 Providing and laying coloured glazed tiles of 26.00 1487.88 Sq.Mt

the size 300 mm x 200 mm x 8 mm / 300 mm

x 450 mm x 8 mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster 1:3

(1 cement : 3 coarse sand) & jointed with

white cement slurry.

17 Providing and fixing mirror polished 14/18 3.00 2012.93 Sq.Mt

mm thick Green Marble stone with full round

edge and polished of approved quality in

clading on sill and around the doors/

windows/ ventilation with 12 mm thick

cement mortor CM (1:4) and fixing with

cement slurry & adhesive including moulding

of exposed edges as directed by engineering

in charge etc. complete.

18 Applying two coats of Acrylic lapy (putty) & 166.00 40.59 Sq.Mt

two coats of primer of approved brand and

manufacture on new wall surface to give an

even shade including thoroughly brushing

the surface free from mortar dropping and

other foreign matter and sand papered

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

19 Wall painting (two coats) with plastic 166.00 52.19 Sq.Mt

emulsion paint of approved brand and

manufacture on undecorated wall surface to

give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

20 Providing & Fixing in position standard 0.48 2724.06 Sq.Mt

extruded approved colour anodised

Aluminum Ventilation with outer frame 65 x

25 x 1.50 mm Stander Box Frame @ Wt

0.833 kg/Rmt with 5mm thick fixed ground

glass and Mosquito net jali fixed to

alluminium strip blade fixed or adjestable

ventilation including all required materials,

fixtures, fastenning, labours and equipments

as per detailed living as directed. For

Ventilators

21 Providing and fixing Single shuttered door 3.00 3477.43 Sq.Mt

having green marble frame with all open

edges machine cut & machine polished,

fixed by zinc coated hinges with double

shutter of factory made & stamped I.S

grade one, type one 35 mm thick solid core,

melamine faced, three layered resin, flushed

door , having decorative lamination on both

sides & 12 mm thick teak wood beading

fixed around the door, Durable Grip shall be

providing with both side 15cm long stainless

steel handle and necessary Locking system,

S.S. fixtures & fastenings etc. directed by

engineer in charge. Door from "NOVAPAN"

OR Equivalent company holding Licence for

Minimum 5 years.

22 Providing and Arranging fix chair having 4.00 4191.50 No

structure of CRCA M.S.pipe 20mm dia and

16 guage with 50 micron powder coated of

approved seat and back 40 density PU foam

covered with fabric of approved shade and

texture with ne year replacement

warranty.Wooden arm rest to be provided as

per approved design.Complete chair should

be in suitable shape including all materials

and labours etc.complete as per drawing and

instruction of engineer-in charge. Visitor

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

23 Providing and Placing ply + laminate-based 40.00 1464.50 Sq.Mt

false ceiling, the base materials consist of

12mm thick plywood (M1) combined with

1mm thick laminate (M24). The framing

options include either a teak wood frame with

cross runners tongued and grooved or a

50x50mm GI section frame with vertical

support and horizontal grid at 450mm c/c

spacing, anchored securely to the RCC

ceiling. Joints in laminates are not permitted

unless unavoidable or specified in the

drawings. Finishing involves applying a Matt

Melamine Polish (M29), with additional paint

or patterns as required by the design.

Necessary hardware includes SDST screws

for fixing the sheets onto the framing, PVC

wall plugs, and pipe clamps for hanging the

framework, alongside all necessary fixtures

and fasteners (M14). Rates include provision

for necessary cutouts for fittings such as

lights, speakers, or AC outlets, and

encompass installation at various heights

and levels on both ceiling and walls, inclusive

of all associated hardware. Completion must

adhere strictly to provided drawings or

instructions from the Architect and Engineer-

in-Charge, with reference to the False

Ceiling Detail Drawings.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

24 Providing, fixing & Arranging compactor of Base 13.00 27552.80 Cmt

frame fabricated from cold formed channel &

angle setcions of 10/14 Gauge Thick HRC

material and setcions Sizes of 25 x 100 x

mm,25/45 x 100 x 25/45 mm, 45 x 45 mm with

guide rails comprises of solid round shaft of

mm (Bright bar) in ground finish, press fit in to

cold formed 'U' channel made from 14 G Thick

material completely grouted within the floor with

– 0 levelling having 4 Nos. of Cast Iron Wheels of

Size : 128 X 28mm (moving on a pair of rails) for

units of lengths less than 3540 mm. All units more

than length 3540 mm shall have 6 nos. of cast

iron wheels of size 128 x 28 mm (moving on

Nos. of rails). The Driving wheel will comprise of a

central hub resting on a pair of roller bearings with

3 insertable arms engaging into the hub. Boltless

type shelves made of 22 SWG C.R.C.A, quality

steel having 8 folds each designed to carry a

U.D.L. of 50 Kgs. Vertical and central panels

made out of 22 SWG mm thick C.R.C.A. The

"UNI-LOCK‟, or the individual unit lock is a

specially designed mechanism embedded in the

hand wheel body itself with a central lock to

enable locking of the entire system with one key

with stoppers on either ends of the rails to prevent

the Compactor unit from moving away from the

rail including all necessary fixture, fastners, fittings

, labour material machinary etc complete as

seletced and diretced by Engineer Incharge.

25 CUPBOARD WITH GLASS PROFILE 15.00 6211.50 Sq.Mt

SLIDER SHUTTER AND LAMINATE FINISH

Providing fixing, installation at site. Side and

back storage unit 450 deep made out of

18/12/8mm thick plywood IS 710 grade

where ever required as per drawing with

vertical and horizontal devisions as per

design with drawers and 8mm thick Glass

Profile Slider shutters, lockable with all

handware like auto hinges, tower bolt,

magnetics catcher, handle and lock of

approved quality. The cabinet should be

raised 75/100mm above floor. Inside 1 MM

thickness balancing laminate. Exposed

outside surface finished with 1MM thickness

standard grade laminate of approved design

and make. All exposed edges finished with

first quality Teakwood biddings to be finished

in melamine polishing as per drawing and

direction of engineer in charge.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

26 Providing and installation of linear workstation 9.00 6817.50 Rmt

having approx size 1200 (L) x 720 (D) x 750/1200

MM (H) of partition, comprising of MS powder

coated partition panels of thickness

mm(double skinned system), with powder coated

MS frames inside of 16 guage. Infills are of

partical board with cladding of 9mm thk particle

board tiles on both sides. Fascia/surface of the

panel can be given in fabric/soft board/ white

board/half glass. All exposed profiles, connectors

are in powder coated aluminium. The horizontal

bottom of each panel will be given with an inbuilt

wire management system of 100mm ht covered

by MS powder coated raceway panel. A pair of

Level adjusters are provided with each panel. All

worktops are in 25mm thk prelaminated MDF with

edge lipping & vertical legs are in 18mm thk

prelaminated MDF with lipped edges. Along with

metal cpu trolly and metallic key board tray (ebco

make). Each work station should be provided with

modular Electrical fittings with 3 switch and

sockets, and One LAN point at the down part of

work station (No extra/additional cost will be paid

for conduit, wireing CAT-6 etc. Contractor should

provide all necessary installation, commissioning

etc. The quoting price should be inclusive of all

types of taxes & duties packing, forwarding,

loading, unloading, installaion. As per detail

drawing & choice of users department and

Concern officers in charge as directed by the

engineer in charge

27 Wooden wall panelling 23.00 4242.00 Sq.Mtr

Providing and fixing Wooden wall

panelling using 12mm thick BWP plywood

with back side anodized aluminium pipe

framing, Aluminium pipe of 50mm x

38mm size with 1mm thickness, 12mm

thick Plywood covered with 4mm thick

veneer with melamine polish All work

includes with required all necessary

hardware and wooden battens, all wooden

and veneer edges finish with melamine

polish. Complete as per directed by Architect

and Engineer in charge.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

28 Medium back revolving & tilting 3.00 9019.30 No

chairProviding and supplying Medium

back chair HOF make Z406 model or

equivalent for conference with M.S.

frame work. Upholstered with

changeable fabric upholstery covers

(as per quirement) andmolded PU

foam, together with molded seat & back

covers. The back foam should be

designed with contoured lumber support

for extra comfort. Caster of high durability

& hydraulic. The chair should have cylinder

with 5 years warranty. The size of chair

47.5cm x 58cm (Back side) and 49cm x

48cm (seat size). The PU foam should

be molded with density = 45 ± 2 kg/m3 with

One-piece armrests. The armrests are

scratch and weather resistant. The

permanent contact mechanisms are

designed with 360° revolving type,

with pneumatic height adjustment & 17°

maximum tilt only & tilt tension adjustment

29 Providing & fixing wash basin with single 1.00 4848.00 No

hole for pillar tap with C.I. or M.S. brackets

painted white including cutting holes and

making good the same but excluding fittings.

(A) Vitreous China [i] Flat back washbasin of

size 550mm. X 400mm. In white colour.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

30 Providing and fixing Urinal of approved 1.00 3636.00 No

quality including connection with trap and

with integral longitudinal flush pipe.(A)

Squating plate pattern white earthenware

Total Rs.

Rupees Eight Lakh ThirtyTwo Thousand Nine Hundred One and Paisa ThirtySix Only

I / We am / are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rate mentioned above. Amount of my /

our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct_________% Below Add_________% Above

Net Rs.__________________ Net Rs.__________________

In words __________________ In words __________________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R.& B. Sub Division R.& B. Division

Modasa Modasa