CA NO GE SOUTH AMB 22 2021 2022 REPAIR AND PAINTING TO STEEL FURNITURE FOR OTM AND MARRIED ACCN UNDER AOR OF GE SOUTH AMBALA CANTT

Amount

TEAPOY VERANDAH (FD-383,255)

Taking out U/S top from teapoy verandah and Supply and fixing new top made of pre-laminated particle board 18 mm thick exterior grade BWR in white shade as per IS Code No-12823. duly covered with 4mm thick teak wood beading all around the top. Matching with the exisiting shape and size all as shown in drg complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE CLERK STEEL (FD-84, 307 & 1004)

Taking out U/S top from table office clerk steel and Supply and fixing new top made of pre-laminated particle board 18 mm thick exterior grade BWR one side teak face ISI marked as per IS CodeNo-12823. duly covered with 4mm thick teak wood beading all around the top.maching with existing shape and size all as shown in drg complete all as specified and as directed by Engr-in-Charge.

TABLE OFFICE OFFICERS STEEL (FD-84 & 1003)

Taking out U/S top from table office officer steel/wooden of any shape & size and Supply and fixing new top made of plain particle board 18 mm thick exterior grade BWP IS Code No-3087. duly fixed with plastic laminated sheet 1 mm thick in colour/shade as approved, 4mm thick teak wood beading all around the top. Matching with existing shape and size all as shown in drg complete all as specified and as directed by Engr-in-Charge.

TABLE DINNING OR (FD-165)

Taking out U/S top of table dining ORs steel/wooden of any shape & size and Supply and fixing new top made of plain particle board 18 mm thick exterior grade BWP IS Code No-3087. duly fixed with plastic laminated sheet 1 mm thick in colour/shade as approved. Make: Formica/Decolam/Sun Glass. 4mm thick teak wood beading all around the top. Matching with existing shape and size all as shown in drg complete all as specified and as directed by Engr-in-Charge.

TABLE 3' X 2' WITH OR WITHOUT DRAWER STEEL (FD-223, 310, 283, 1007 & 1008)

Taking out U/S top of table 3' x 2' and Supply and fixing new top made of plain particle board 18 mm thick exterior grade BWP IS Code No-3087. duly fixed with plastic laminated sheet 1 mm thick in colour/shade as approved , 4mm thick teak wood beading all around the top. Matching with existing shape and size all as shown in drg complete all as specified and as directed by Engr-in-Charge.

TABLE 3' X 3' STEEL (FD-1009)

Taking out U/S top of table 3' x 3' and Supply and fixing new top made of plain particle board 18 mm thick exterior grade BWP IS Code No-3087. duly fixed with plastic laminated sheet 1 mm thick in colour/shade as approved, 4mm thick teak wood beading all around the top. Matching with existing shape and size all as shown in drg complete all as specified and as directed by Engr-in-Charge.

ALMIRAH LARGE STEEL WITH SHELVES (FD-67M & 1031)

Taking out U/S lock from Almirah large steel and Supply and fixing new lock with duplicate key of approved quality ISI marked. Matching with the existing shape & size. All as shown in drg complete all as specified and as directed by Engr-in-Charge. Note: Lock will be dumped in advance before commencement of work along with purchase voucher.

Taking out U/S handle from Almirah large steel and Supply and fixing new handle chromium plated of approved quality ISI marked. Matching with existing shape and size. All as shown in drg and as directed by Engr-in-Charge.

Taking out old unsv shelves Almirah large steel and Supply and fixing new shelves made out of 1.00mm thick MS plain black sheet. Matching with the exisiting shape and size all as shown in drg complete all as specified and as directed by Engr-in-Charge.

Taking out U/S leg from Almirah large steel and Supply and fixing new legs of Almirah large steel made out of 1.00mm thick steel plain black sheet of approved quality. Matching with the exisiting shape and size all as shown in drg complete all as specified and as directed by Engr-in-Charge.

ALMIRAH MEDIUM STEEL WITH SHELVES (FD-67 & 1032)

Taking out U/S lock from Almirah Medium steel and Supply and fixing new lock with duplicate key of approved quality ISI marked. Matching with the existing shape & size. All as shown in drg complete all as specified and as directed by Engr-in-Charge. Note: Lock will be dumped in advance before commencement of work along with purchase voucher.

Taking out U/S handle from Almirah Medium steel and Supply and fixing new handle chromium plated of approved quality ISI marked. Matching with existing shape and size. All as shown in drg and as directed by Engr-in-Charge.

Taking out old unsv shelves from Almirah medium steel and Supply and fixing new shelves made out of 1.00mm thick MS plain black sheet. Matching with the exisiting shape and size all as shown in drg complete all as specified and as directed by Engr-in-Charge.

Taking out U/S leg from Almirah medium steel and Supply and fixing new legs of Almirah medium steel made out of 1.00mm thick steel plain black sheet of approved quality. Matching with the exisiting shape and size all as shown in drg complete all as specified and as directed by Engr-in-Charge.

CHAIR WRITING CUSHIONED SEAT & BACK (FD/E6/MAP/12)

Taking out U/S tapestry cloth from seat & back of chair writing cushioned and Supply and fixing new tapestry cloth of approved quality & shades as approved by GE including replacement of foam cushion and plywood etc. matching with the extising shape and size complete all as specified and as directed by Engr-in-Charge.

Taking out U/S hand rest from chair writing cushioned and Supply and fixing new hand rest made of integral skin polyurethane with 75-85 shore 'A' hardness and reinforced with MS insert. Matching with the existing shape and size. All as shown in drg complete all as specified and as directed by Engr-in-Charge.

LOCKER BED SIDE STEEL (FD-257 & 1029)

Taking out U/S hasp & staple from Locker bed side steel and Supply and fixing new hasp and staple of approved quality. Matching with the existing shape and size and as per drg complete all as specified and as directed by Engr-in-Charge

Taking out U/S handle from Locker bed side steel and Supply and fixing new aluminium steel bow handle 100mm long of approved quality. Matching with the existing shape & size complete all as specified and as directed by Engr-in-Charge

Taking out U/S hanging rod from locker bed side steel and Supply and fixing new CP steel hanging rod 19 mm approved quality all as shown in drg complete all as specified and as directed by Engr-in-charge

Taking out U/S leg from Locker Bed side steel and Supply and fixing new legs of Locker Bed side steel made out of 1.00mm thick steel plain black sheet of approved quality. Matching with the exisiting shape and size all as shown in drg complete all as specified and as directed by Engr-in-Charge.

CHAIR TUBULAR STEEL WITH ARMS (FD-75)

Taking out U/S seat & back from chair tubular steel and Supply and fixing new seat & back made of hard wood duly canned with 2 to 2.5mm wide plastic cane gola type as per Godrej pattern. Matching with the existing shape and size and as per drg. as shown on drg and as directed by Engr-in-Charge.

Taking out U/S MS flat iron from chair tubular steel and Supply and fixing new MS flat iron of size 25x5mmx 500mm long. matching with the existing shape & size all as directed by Engr-in-Charge.

Taking out U/S hand rest from chair tubular steel with arms and Supply and fixing new hand rest made of hard wood of size 45x440mm long duly painted in required shade.Matching with the existing shape & size. All directed by Engr-in-Charge.

CHAIR TUBULAR STEEL WITHOUT ARMS (FD-75)

Taking out U/S seat & back from chair tubular steel (without arms) and Supply and fixing new seat & back made of hard wood duly canned with 2 to 2.5mm wide plastic cane gola type as per Godrej pattern. Matching with the existing shape and size and as per drg. as shown on drg and as directed by Engr-in-Charge.

Taking out U/S MS flat iron from chair tubular steel (without arms) and Supply and fixing new MS flat iron of size 25x5mmx 500mm long. matching with the existing shape & size all as directed by Engr-in-Charge.

CHAIR REVOLVING LAB CUM COMPUTER WITH OR WITHOUT ARMS (TP)

Taking out U/S caster wheel from any type of chair revolving and Supply and fixing new caster wheel of different type as per trade pattern matching with the existing shape & size and as directed by Engr-in-Charge.

Taking out U/S shaft from chair revolving and Supply and fixing new shaft of different type as per trade pattern and making the chair functional. All as directed by Engr-in-Charge.

Taking out U/S tapestry cloth from seat & back of chair revolving and Supply and fixing new tapestry cloth of approved quality & shade including replacement of foam cushion and plywood etc. All as per trade pattern and as directed by Engr-in-Charge.

Taking out U/S hand rest from chair revolving and Supply and fixing new hand rest of different type as per trade pattern matching with the existing hand rest. All as shown in drg and directed by Engr-in-Charge.

FORM WITH BACK/WITHOUT BACK STEEL (FD-77, 78 & 1027)

Taking out U/S top (wooden plank) from Form with back/without back steel and Supply and fixing new top made of sheesham wood plank of size 1800x255x25mm including polishing. All as shown in drg and as directed by Engr-in-Charge.

Taking out U/S back rest (wooden plank) from Form with back steel and Supply and fixing new back rest made of sheesham wood plank size 1800x150x19mm including polishing. All as directed by Engr-in-Charge.

Taking out U/S rubber shoe from Form with back/without back steel and Supply and fixing new rubber shoe of best quality matching with the existing shape & size and all as directed by Engr-in-Charge.

CHARPOY WITH HARD TOP (MS PIPE) :-

Taking out UNSV Plywood from Charpoy with hard top (MS Pipe), Supply and fixing new plywood of size 1935 x 845 x 12 mm thick commercial ply exteror grade BWR ISI marked, IS Code-303. Fixed at the top of charpoy screwed with MS cleat with Nut, bolt and washers and shall be welded to MS tube legs. Before fixing of plywood all steel/iron surface. Rest all as per the drawing and as directed by Engr-in Charge .

Material and labour in replacement for hard rubber shoe of Charpoy with hard top (MS Pipe) of black colour as per existing as approved complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Running welding to any steel furniture items with Gas/Electric as required. Running welding upto 12mm shall be considered one point, complete all as specified and as directed by Engr-in-charge.

PAINTING

Scratching old U/S paint from Table office clerk steel cleaning and making the surface smooth and painting the same inside & out side with two coat of silver hammer tone paint complete all as specified and as directed by the Engr-in-Charge.

All as per item srl No 17.01 here in before but Table office offficer steel including polishing to beading of top complete all as specified and as directed by Engr-in-charge.

All as per item srl No 17.01 here in before but Table dinning ORs including polishing to beading of top. complete all as specified and as directed by Engr-in-charge.

All as per item srl No 17.01 here in before but Table 3'x3' steel including polishing to beading of top complete all as specified and as directed by Engr-in-charge.

All as per item srl No 17.01 here in before here in before but Table 3'x2' with or without drawers' including polishing to beading of top complete all as specified and as directed by Engr-in-charge.

All as per item srl No 17.01 here in before but Teapoy verandah with white paint synthetic enameled including polishing to beading of top complete all as specified and as directed by Engr-in-charge.

All as per item srl No 17.01 here in before but Almirah large steel with shelves complete all as specified and as directed by Engr-in-charge.

All as per item srl No 17.01 here in before but Almirah med steel with shelves complete all as specified and as directed by Engr-in-charge.

All as per item srl No 17.01 here in before but Chair writing cushioned seat & back (Black paint) complete all as specified and as directed by Engr-in-charge.

All as per item srl No 17.01 here in before but Chair tubular steel with arms (OG Paint) complete all as specified and as directed by Engr-in-charge.

All as per item srl No 17.01 here in before but Chair tubular steel without arms (OG Paint) complete all as specified and as directed by Engr-in-charge.

All as per item srl No 17.01 here in before but Form with back/without back steel (OG Paint) complete all as specified and as directed by Engr-in-charge.

All as per item srl No 17.01 here in before but locker bed side steel complete all as specified and as directed by Engr-in-charge.

All as per item srl No 17.01 here in before but Charpoy with hard top (MS Pipe) complete all as specified and as directed by Engr-in-charge.

V K Constructive Builders

M/s Rajesh Kumar Jain

NAVEEN TRADERS