AAI/KOL/Misc.Capital/2025-26

Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in-charge.

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. : All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-5000 or more.

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns etc. for mass concrete.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Brick work with common burnt clay F.P.S. (non modular) bricks of Size 248 x 120 x 70 mm of class designation 7.5 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of Size 248 x 120 x 70 mm of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of Size 248 x 120 x 70 mm of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry.

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete: Hot finished welded type tubes

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating minimum 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Extra for providing and fixing wind ties of 40x 6 mm flat iron section

Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of thick not less than 3.2 mm to steel frames with priming coat of approved steel primer all complete as per direction of E-I-C.(MS section shall be paid separately)

Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge: 10 x 120 mm

Providing and fixing 4 mm thick Aluminium Composite Panel having 3mm thick LDPE core with 0.50 mm thick aluminium sheet cover on top and bottom, the top aluminium sheet with 25 micron (minimum) PVDF coating and bottom sheet with mill finish or, service coating fixed on frame in cladding at all height inclusive of labour, scaffolding, T&P and sundries etc. The ACP cladding has to be fixed on aluminium/MS frame work with structural grade silicon sealant for pasting and sealant for groove filling along with 1.2 mm thick VHB tape of 3M or, equivalent make all complete (The cost of aluminium extruded built up section for frame work shall be paid separately in DSR Item no 25.1)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : (a) For fixed portion. (i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : (a) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). (i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.: Size of Tile 600x600 mm.

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm Each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing 12 mm thick, Type-B, Category-Ill as per IS: 14862 : 2000 reinforced with cellulose fibre manufactured through autoclaving process with suitable fibre cement screws on aluminium or steel frame work as per direction of E-I-C. The boards are to be fixed to the frame work with joints staggered to avoid through cracks including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, joint finisher as per manufacture's specification and direction of E-I-C all complete. (Aluminium / Steel Section will be paid separately)

Providing and fixing 19 mm thick commercial Marine plywood of approved brand with necessary screws, nails, etc. complete for construction of counter, cupboard, partitions or similar works as per direction and satisfaction of Engineer-in-Charge. (Fittings to be paid seperately)

Providing and fixing 12mm thick commercial ply conforming to IS : 1328 BWR type with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately).

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality: 1 mm thick

Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 50 mm

Providing and fixing chromium plated brass handles with necessary screws etc. complete: 100 mm

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete: Double strip (horizontal type)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (a) Granite stone slab of colour black, Cherry/Ruby red. (ii) Area of slab over 0.50 sqm.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge : Concealed work, including cutting chases and making good the walls etc. : 20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work : 25 mm nominal dia Pipes

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing PTMT Swan neck pillar cock of approved quality and colour. 15 mm nominal bore, 107 mm long, weighing not less than 110 gms

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length : 15 mm nominal bore

Providing and fixing flat back lipped front urinal basin of 390x375x590 mm size urinal basin of approved brand and manufacture including spreaders with unions, waste fitting C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required as per direction and satisfaction of E-I-C.

Providing and fixing Urinal partition of approved brand and manufacture of size 95X690X1000 mm with 1/2" BSP thread and shapes complete in all respect as per direction and satisfaction of E-I-C.

Providing and fixing oval wash basin, 32 mm C.P. brass waste of standard pattern with all fittings complete in all respect : White vitreous china oval Wash basin of approve brand and manufacture of size 560x410mm as per direction and satisfaction of E-I-C.

Providing and fixing PTMT 2 in 1 Bib Cock including PTMT health faucet including tube and hook of approved brand and manufacture with necessary fittings complete in all respect as per direction of engineer in charge. (a) 15mm nominal bore

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (a) 125 mm.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour all complete to achieve even shade and colour: New work (Two or more coats) over and including water thinnable priming coat with cement primer having VOC Content less than 50 gms/litre.

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing Frosted glass film with approve design cutting on glass panes after thoroughly cleaning the glass surface as per direction of E-I-C.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.: 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Bend 87.5° : 110 mm bend

Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications :On bituminous surface @ 0.50 Kg / sqm

Providing and laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/25 conforming to IS : 702, prepared by using mastic cooker and laid to required level and slope, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximate spacing of 10 cm centre to centre in both directions, pressed into surface protruding 1 mm to 4 mm over mastic surface, including cleaning the surface, removal of debris etc. all complete. (Considering bitumen using 10.2% as per MORTH specification). 25 mm thick

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): (a) With float glass panes of 4.0 mm thickness. (weight not less than 10kg/sqm)

Providing and fixing wall paper of approved colour,texture and quality on brick / multipurpose cement board wall by adhesive/or any other suitable fixing arrangement as per direction of Engineer in charge.

Providing and fixing premium quality 10 mm thick wooden flooring including skirting of minimum 100 mm height of Merbau Oak texture or equivalent of approved brand with necessary glue,adhesive or any other suitable fixing arrangement . The job should be completed in all respect as per direction and satisfaction of E-I-C and nothing extra shall be payable. Note : a) Skirting will not be paid separately, it is included with flooring) b) The work shall be executed through the authorised person of the approved Manufacturer.

Providing and fixing 12 mm thick 100% bendable Acrylic solid surface of approved make, shade and design, with properties like bacteria resistance, antifungal, heavy duty scratch resistant & stain resistant, impact resistant, insulative & non conductive, Green Guard gold certified, fire rating as per standard EN 13501-1 for Euroclass reaction to fire, density at 23 degree celsius 1.81gm/cm3, thermal expansion 3.5x10^(-5)/degree celsius all complete as per direction of E-I-C. Note: a) Shade of Acrylic solid surface - Cascade Ice or Cascade Cream or Equivalent. b) The work shall be executed through the authorised person of the approved Manufacturer.

Providing and fixing MS Pre-Fabricated office cabin of size(10’ X 10’ X 8’6”) made of 1.2 mm thk MS sheet with 50mm thick glass wool insulation alaround with 01 no Main Door with bulkhead, Aluminum sliding window with safety grill including necessary eletrical fittings 01 nos Cabin fan, 02 nos LED light, 01 nos Main Switch with 32 amps MCB, 01 nos 16 Amp Switch and socket and 01 nos 6 Amp Switch and socket along with 02 Nos Working table of size(04'x02') with locks and drawer make on 18mm MDF with 02 Nos revolving chair including transportation and installation at site all complete as per direction and satisfaction of Engineer-In-Charge.

Providing and fixing MS Pre-Fabricated office cabin of size(20’ X 10’ X 8’6”) made of 1.2 mm thk MS sheet with 50mm thick glass wool insulation alaround with 01 no Main Door with bulkhead, Aluminum sliding window with safety grill including necessary eletrical fittings 01 nos Cabin fan, 02 nos LED light, 01 nos Main Switch with 32 amps MCB, 01 nos 16 Amp Switch and socket and 01 nos 6 Amp Switch and socket along with 02 Nos Working table of size(04'x02') with locks and drawer make on 18mm MDF with 02 Nos revolving chair including transportation and installation at site all complete as per direction and satisfaction of Engineer-In-Charge.

Providing and fixing Industrial Grade Stainless Steel 304 grade Turbo Ventilator of neck diameter 24 inch with FRP base plate on existing 0.50 mm thick profile sheet by necessary hardware and sealant etc. including transportation and installation at all height all complete as per direction and satisfaction of Engineer-In-Charge.

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge.

Providing & fixing of polycarbonate multi-layered, multicell connectible modular panel system, a complete assembly of coextruded UV plus polycarbonate panels along with all standard fixing accessories. The polycarbonate panel shall be 16 mm thick with up-stand seam at both sides. The panel shall be uniform in colour with an integral core. In a cross section, the core shall be constructed of six walls, five cells with vertical separator in between like truss bracing structure to provide better strength to the panel. The polycarbonate panels with interlocking connectible Polycarbonate connectors running lengthwise at both sides of the panel shall be with double tooth locking and anti-pop, deep groove to counter shear wind forces. The whole system shall be secured using SS /Aluminium Cleat having minimum two points for fastening with self-drilling Screws to have proper fixing with the existing structural framework. The SS /Aluminium cleat shall have a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608:2005. The whole system shall be secured with end caps, breather tape/solid tapes, Aluminium “U” – End profile (Mill finish) having drainage holes to let rainwater flow out without affecting the panel system. U value shall not be more than 2.1 Watt/m2K as per EN ISO 10077-2:2018. Panels must satisfy Dart drop impact test as per IS 14443 – 97 shall show no sign of breakage on polycarbonate sheets which have been exposed to UV for a min. 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed UV for 500 Hours as per ASTM G 155. Panel shall satisfy the fire spread test as per ASTM D 635 – 18. All respective third-Party test certificates shall be produced before supplying the material and the same shall not be more than 5 years old and shall be from NABL accredited Indian labs. The system shall bear a 10 Year Limited Warranty towards Light Transmission, Colour and Breakage by the manufacturer. The Item includes supplying, Installation and fixing of multicell polycarbonate sheet on pre-installed structural M.S. framework (MS Work paid separately) with SS /Aluminium Cleat including all accessories complete to make a watertight canopy including transportation, lifting, scaffolding to any height etc. to complete in all respect as per direction and satisfaction of Engineer-in-Charge. The work shall be executed through the authorised person of the approved Manufacturer. Color: Clear and White or as approved.

Please Enable Macros to View BoQ information