Construction of ACR at Lt. SCGT Gh. Mohi-u-din No. 2557 HS School Sugin Khag

Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

P/L of dry stone soling duly hand packed including all carriages loading unloading complete job before laying of mud mate in trenches incl. all carriages of material involved & head load.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centring and shuttering including strutting proping and removal of form work for foundations, footings, bases of columns etc for mass concrete.

Filling of rooms with II class sand / GSB/ Stone dust all complete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand). Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and fixing of wood work in frames of door/ window /arch windows /ventilator wrought frames (chowkats) imported kail Wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter Nuts and bolts.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain indow sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with :1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for:

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing and fixing high rib colour coated sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick

Providing and Fixing of ridges hips / valleys ornamental of colour G.I sheets including cost screws/washers all complete job. Providing ridges or hips of width 60 cm overall width planin G.S sheets fixed with polymer coated J or L hooks, bots and nuts 8mm dia G.I limpet and bitumen compplete 12.4.30.50 mm thick with zinc coating not less than 275 gram / m2

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Applying washable axle on walls external surfaces with good quality axle two or mor coats to make surfaces smooth all complete job.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing fixing of 35mm thick panelled galzed shutters for doors, windows including cost of MS butt hinges and decorated teak panelling all complete. Imported wood

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and fixing of hardware items of good quality including cost of screws all complete job

Handles 150 mm

Handles100mm

T bolt 100mm

T bolt 150mm

Concealed locks 200 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

providing heavy duty glass panes 3.5 mm thick instead of ordinary glass panes 13.75 kg/sqm in doors windows and clererstoy windows shutters (Area of opening for glass panes excluding portion inside shall be measured

Providing and electric fitting as per details one lightingh point includes lamp point with wiring in 1.5 sq mm pvc insulated copper wire and 2.5mm pvc multistrand copper wire, 6 amp on way switch in PVC conduits/ channel with bends junctions boxes etc 6 amp S pole MCB 10 amp with switches all complete job.

One heating point includes 03 pin heating socket with wiring in 2.5 sq.mm pvc insulated copper wire and 4.00 sq.mm pve multistrand copper wire, 16 amp on way switch in PVC conduits/ channels with bends junctions boxes etc 6 amp S pole MCB 10amp with switches all complete job

One fan point includes on fan with wiring in 2.5 sq.mm pvc insulated copper wire and 4.00 sq.mm pvc multistrand copper wire, 1200 mm ceiling fan with dimmer in PVC conduits / channels with bends junctions boxes etc 6 amp S pole MCB 10 amp with switches all complete job.

Carriage of material by M T from source to site complete job.

Sand Av. Lead 30 Kms

Course Aggregates Av. Lead 10 Kms

bricks av. Lead 25 kms