SRMO Govt. Sr. Sec. School Chail Chowk Distt. Mandi (HP) (SH- grading of slab, repair wood work, tile work, painting on wood, steel, distempering, finishing with apex and electrical work, etc.

Amount

Dismenteling precast concrete slab in walls , partition walls etc including stacking within 50 mtrs lead thickness above 40mm

Demolishing RCC work by machanical means and stock piling at designated locations and disposal of dismentalled meterial up to lead of 1 KM stacking serviceable and unserviceable meterial separately including cutting enforcement bars

Repair to plaster of thickness 12 mm to 20 mm in paches of area 2.5 sqm and under , including cutting the patch in propper shape , raking out joints and preparing and plastering the surface of walls complete, including disposal of rubbish to the dumping ground , all complete as per direction of engineer -in -charge

Providing and laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3 greaded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work : (a) Suspended floors, roofs, landings and their supports, balconies, beams, girders, bressumers and their cases (except spiral cantilever upto floor two level.

Steel rainforcement for RCC work I/C straightening , cutting ,bending ,placing in position and binding all complete up to plinth level . Mild steel and medium tensile steel bars. 22.79 cum @ 80 kg/cum

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based)confirming to IS 15477, in average 6 mm thickness including grouting of joints (payment of grouting of joints to be made separately ), 600X600mm

Taking out existing wooden door shutter repair by cutting , painting etc and refixing of repaired door shutter to existing door frames including replacement of hinges with screw etc.

Prooviding wood work in frames of doors, windows, clearestory windows and other framed and fixed in postion. 1st. Class hard wood/sal wood.

Providing & fixing panelled glazed or panelled and glazed shutters for doors windows and clearstory windows including black enamelled iron butt hinges with necessary screws. 40mm thick Ist. Class Deodar Wood.

P/F prelaminated medium density fiver board IS 14587 :1998 Marked , with one side decorated lamination other side balancing lamination grade 1 (exterior grade) in shelves with screws and fittings whereever required , edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). Prelaminated with decorated lamination one side and other side balancing lamination exterior grade 1 MDF board 18 mm thick confirming to IS 14587

P/F powder coated telescopic drawer channels 300 mm long with necessary screws etc complete.

P/F bright finished brass handles with screws etc complete. 125 mm

P/F PTMT handles with necessary screws etc. complete. 150X34X24 mm weighing not less than 26gram

P/F PTMT butt hinges with necessary screws etc. complete.

P/F PTMT tower bolt with 12 mm one piece rod inside and necessary screws etc . Complete.

P/F aluminium sliding door bolt ISI marked annodised (annodic coating not less than grade AC 10 as per IS 1868), transparent for dyed to required colour or shade , with nuts and screws etc. complete. 300X16 mm

Steel work welded in built up section / paint work I/C cutting , hoisting , fixing in position and appling a priming coar of approved steel primer using structural steel etc. In gratings , frames , guad war , ladder , railing , brackets , gates , and similar work

GI metal ceiling lay in plain tegular edge globel white colour tiles of size 595X595 mm and 0.5 mm thick with 8mm drop made of GI sheet having galvonising of 100 grams per square meter (both side inclusive) and electrostatically polyester power coated of thickness 60 microns including factory painted after bending.

P/Fspecial quality brite finished brass cup board or ward robe locks with 4 livers of approved quality including necessary screws etc. complete. 40 mm

Providing corrugated GS sheet roofing including verticle / curved surface fixed with polymer coated J or L hooks , bolts and nuts 8 mm diameter with bitumen and GI limpet washers or with GI washers filled with white lead , including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete excluding the cost of perlins , rafters and trusses and including cutting to size and shape whereever required 0.63 mm thick with zinc coated .

Finishing wall with acrylic smooth exterior paint of required shade (two or more coats applied @ 1.67 ltr per 10 sqm over and including priming coat exterior primer applied @ 2.20 KG per 10 sqm)

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and i/c a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. ASIAN/Nerolac.

Painting two coat (excluding priming coat) on new wood and wood based surfaces with readymixd paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter. Enamal other than white.

Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white.

P/F AC sheet ceiling with nails and by screws etc. complete in all respect framework for ceiling measured and paid for seperately 4mm thick sheet

C/O toe walls for protection of slopes as per drawing and rechnical specifcation clause-1302.5 Nominal mix 1:3:6 (1 cement :3 sand :6 aggeregate 20 mm nominal size) Walls

Providing and laying cement concrete flooring 1:2:4(1cement:2sand:4graded stone agregate 20mm nominal size) and curring complete excludin.

Nirmal Singh

KHUB RAM