Special repair to CWE office at HQs CWE Jodhpur in Army Area Jodhpur

Amount

Taking down chaukhats (doors/windows) with shutters (without taking off shutters from the frames) area nexc 1.50 Sqm & removal to store

Taking down chaukhats ( Doors/ Windows) with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but nexc 4.0Sqm & removal to store

M&L for fabrication of powder coated aluminium frame work as in frames for aluminium windows with or without rebate or for sliding windows(two track/three track ) , ventilators etc with louvers having suitable mechanism for tilting , U shaped fillets for securing Jallies etc & the likes complete all as per sample kept in GE Office & fixed in position complete all as directed Note : Glass panes in louvers & stainless steel wire cloth shall be measured & paid for seperately,

M&L for pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators.

M&L for pre powder coated aluminium window shutters prepared for sliding or hanging etc complete using section having wt not exc 0.50 kg/RM all as directed & specified

M&L for pre powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F 4.80 mm thick plain Sheet glass tinted , ordinary quality and glazing withsecured in wooden beads or snap fit glazinng clips square exc 0.5 sq. m in each pane

S & F 4 mm thick pin headed figured glass in small widths as in louvers of ventilators complete all as directed.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire & avg width of appertuer 1.40 mm fixed to Anodised aliminium framework of windows / vents & door shutters etc ccomplete.

M&L for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels with decorative vceneers on both faces complete fixed to frames .

M&L for prep of new wooden surfces & applying 2 coats of syn enamel paint over a coat of pink primer .

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Wood Grain Printed(Both sides) PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed (both sides) PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per spec & drawing

M&L for Solid PVC Door Frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet incl all edges printed to match the shade reinforced with M.S. Sq tube, suppling & fixing in opening as per spec & drawing

S & F for Anodised aluminium barrel tower bolts, 150 mm size with bright bolt and fixed

S & F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp,staple (bolt type) and fixing clips of sheet,cast orextruded sections& fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F Mild steel Butt hinges, medium weight, cold rolled mild steel, and fixed 100 mm size

S&F Stainless steel butt hinges 100mm size medium wt fixed with steel nut blots in PVC door frames & PVC shutters.

S &F Anodised Aluminium handles 150 mm size D type with plate all as per sample

Supply and fixing in repairs decorative type curtain rod of MS pipe Stainless steel finish 22 to 25 mm dia as per sample superior quality complete all as directed

Supply and fixing of purpose made brackets trade pattern for decorative type curtain rods suitable for holding 22 to 25 mm dia as per sample as in repairs.

Supply and fixing of decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25 mm dia curtain rods as per sample as in repairs

M&L for prepration of new wooden Surfaces of any description, over 10cm in width or girth & applying 3 coats of varnish over a coat of sizing & filler coat with

M&L for Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed size of section 105x65 mm

M&L for PCC 1:3:6 type C1 using 20 mm graded stone agg as in filling under pressed steel door frames & hold fasy blocks etc complete

M&L prep of new steel surfaces exc 10 cm width or girth & applying 2 coats of syn enamel paint over a coat of red oxide primer.

Grinding & polishing of existing stone flooring (Kota stone) incl minor repairs to joints etc evenly with machine fitted with fine grade blocks (No. 120) & finest grade grit blocks (No. 320) complete to obtain mirror finish all as specified & directed

Prepration of existing surfaces treated surfaces of walls using Berger Express or equivalent scrubber machine with vaccum suction arrangement complete all as specified & directed .

Complete removal of existing treatment from walls

M&L for applying two coats of Birla/JK wall care putty on walls and sand papering the entire surface with grade I abrasive paper and dusting off to achieve an even and smooth surface. & then applying the second coat of wall care putty to obtain a smooth & even surface complete all as specified & directed .

M&L for applying 2 coats of Oil Bound distemper over putty applied surfaces . The OBD shall be in one or more colours/ shades all as directed at site.

M&L for prep of new ceiling surfces & applying three coats of white wash complete .

M&L for prep of old ceiling surfces & applying one coat of white wash complete .

M&L for prep of old previously treated surfaces & applying one coat of white wash complete .

M&L for prep of old painted surfaces & applying two coats of acrylic emulsion complete all as specified & directed.

M&L for prep of new surfces plastered /pointed & applying two coats of acrylic base paint over a coat of suitable primer complete .

Taking down carefully cement conc /spalled out concrete from RCC roof projections, cilinigs ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc complete.

M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface.

M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack.

M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as directed at site

Taking down cement plaster on brick or stone walls, tiling & ceilings including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L 15 mm thick rendering on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished fair and even without using extra cement in CM 1:6.

M&L for 15 mm thick rendering in CM 1:4 over stone masonry surfaces & finished fair & even w/o using extra cement using integral water proofing liquid as per mfr instructions .

M&L for 10 mm thick rendering in CM 1:4 over conc surfaces finished even & smooth as in ceilings

Demolition of PCC as in flooring, plinth protection etc n. exc. 15 cm thick complete.

M&L for 20-25mm thick Machine cut kota stone slab flooring over 20mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for 20-25 mm thick yellow jaislmer stone machine cut mirror polished laid in flooring over 15 mm thick screeding in CM 1:4 complete incl rubbing & polishing complete.( size of stone shall not be less than 58x58 cm)

M&L for 18-20 mm thick yellow Jaislmer marble stone machine cut as in skirting & risers & other vertical surfaces complete over 10 mm thick rendering in CM 1:3 complete

M&L for coloures Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match .

M&L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) as in sub floors etc inck finishing the surface even & rough to receive screeding

M&L for 15 mm thick Screed bed or bedding layer of CM1:4 for laying floor finishes .

M&L for 10 mm thick rendering in CM1:3 over stone masonry surfaces & finished even & rough to receive tiles.

M&L for coloured Glazed ceramic tiles in vertical surface 300x450 mm size 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match . Note :- The tiles shall be in one or more colour patterns incl highlighters all as approved & directed at site .

Taking up or down 15 mm bore steel tubing& connection, including cleaning for refixing or removal to store

Taking up or down 20 mm bore steel tubing& connection, including cleaning for refixing or removal to store

Taking up or down 25 mm bore steel tubing& connection, including cleaning for refixing or removal to store

M&L for 15 mm bore GI tubing medium grade incl all fittings fixed to walls or ceilings

M&L for 20 mm bore GI tubing medium grade incl all fittings fixed to walls or ceilings

M&L for 25 mm bore GI tubing medium grade incl all fittings l fixed to walls or ceilings

S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed fixed as in repairs

S&F MS chromium plated peg set of five fixing with wall complete

S & F PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75 mm bore pipes

S&F PVC (SWR) gully trap 125 mm size setting and jointing with solvent cement

S&F for 15 mm size Bib taps, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repairs

S&F as in repairs 15mm bore CP brass angular stop cock screwed for iron pipe or ferrule and fixed complete all as specified and directed

S&F as in repairs 15mm bore CP pillar cock fancy type 15 mm bore

S&F as in repairs two way angle cock cromium plated fancy type 15 mm bore /size

S&F as in repairs light coloured (Ivory) vitreous china, wash hand basin of size 550mm X 400mm flat back with pedestal Including bracket , CP waste coupling ,chain and plug, 2 Nos PVC connection 15 mm size & 45-60cm long & PVC Waste coupling & flexible waste pipe complete all as directed.

S&F in as repairs vitreous China Pedestal pattern WC light coloured (Ivory) complete with best quality PVC coloured seat & cover alll as directed

Supply only low level flushing cistern 09 Ltr capacity dual flush type complete with float valve, syphon assembly etc complete. The colour of the cistern shall be as matching with the colour of the WC Pan

M&L for Looking mirror 4-5 mm thick in Moulded PVC frame all as per sample

S&F tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as directed

M&L for 18-20 mm thick Black granite stone as in cooking platforms , slabs for oval type WHB,sinks etc & the likes complete laid over 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc .

M&L for rounding of the edges of stone slabs as in cooking platforms , treads of steps shelves & cills etc all as directed at site.

S&F as in repairs health foucet with 1200mm long flexible mild steel tube with wall hook and complete all as specified and as directed and approved by Engineer-in-Charge.

Taking down old false ceiling /wallpanelling Textile coverings etc incl pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets frame work & removal away from site .

M&L for providing Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified & finally Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface all as directed Note : The false ceiling shall be in two levels ie the portion along the walls shall be at a lower level & the central portion shall be at a higher level with a gap of 10 to 15 cm in between. The central portion shall be of shape & size all as directed at site.

M&L prefabricated, pre reinforced, 100 to 125 mm wide POP moulded cornices/moulding fixed on ceiling/wall complete all as specified and directed.

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose, celing fan etc complete

M & L for Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FR) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked in and including PVC rigid conduit (MMS/casing caping) ISI marked with accessories fixed Concealed in wall / roof / ceiling etc and including sunken pressed steel terminal boxes in wall and 1.50 sq mm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for :- One light point controlled by one, one way switch

All as per item No 80 above but One fan point controlled by one way switch.

All as per item No 80 above but One socket outlet 3 pin 5/6 Amps on same board

All as per item No 80 above but One socket outlet 3 pin 5/6 Amp on independent board

All as per item No 80 above but with 2.5 Sq mm single core multistanded copper conductor cable for 6 pin 15 Amp socket outlet on independent board .

ABHOG INFRASTRUCTURE PRIVATE LIMITED