Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 and reasonable | |
| 2 | L2₹30.9 L+₹56,748.91 (1.87%)Rejected-AOC | L2 | Rejected-AOC Not being L1 | |
| 3 | L3₹31.0 L+₹69,457.20 (2.29%)Rejected-AOC | L3 | Rejected-AOC Not being L1 | |
| 4 | L4₹32.7 L+₹2.4 L (7.93%)Rejected-AOC | L4 | Rejected-AOC Not being L1 | |
| 5 | L5₹33.7 L+₹3.4 L (11.3%)Rejected-AOC 45 38 15 JAGANNADHAPURAM VISAKHAPATNAM 530 016 | VISAKHAPATANAM | ANDHRA PRADESH | 530016 | L5 | Rejected-AOC Not being L1 |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
13 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ND VIZAG
GE ND Vizag, Industrial Estate Post, 104 Area
INCREASING HEIGHT OF PERIMETER WALL INCLUDING CONNECTED ITEMS AT WED AND PROVISION OF CHEQUERED TILES PATHWAY AT INS EKSILA UNDER AGE BR III OF GE ND VISAKHAPATNAM
2023_MES_581794_1
8251GEND
Open Tender
Civil Works
Item Rate
180 days
Visakhapatnam
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE ND Vizag
₹84,000
13 Jul 2023
20 Feb 2023
18 Mar 2023
20 Feb 2023
13 Mar 2023
6 Mar 2023
Amount
Demolition of unreinforced cement concrete in ground floors not exceeding 15 cm thickness above ground level complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M & L for reinforced cement concrete , Design Mix M-30 (using 20 mm graded crushed stone aggregate) in columns, pillers, piers etc complete all as specified and directed.
M & L for reinforced cement concrete Design Mix M-30 (using 20 mm graded crushed stone aggregate) in beams, cantilevers, lintels over 1.5 m span complete all as specified and directed.
M & L for form work to sides and soffits of floor or roof beams, lintels, cantilevers, slabs, shelves.plinth beams including supports etc, rough finished surfaces, flat complete all as specified and directed.
M & L for form work to sides of pillars, posts, struts, piers, columns and stanchions including supports etc, rough finished surfaces, flat complete all as specified and directed.
Brick work with fly ash bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed
M & L for TMT bars 10 mm dia and over, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
M & L for Mild steel TMT bars 5 mm to 10 mm dia, cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for Mild steel work in frame work such as grills, grating etc with ends of bars shouldered and or riveted ,freamed guard bars, barred iron doors, ladders, walkways, railings, frame work of water tanks and similar articles complete all as specified and as directed.
S& F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.
S& F 600 mm dia stainless steel punched tape Concertina Coil as per IS 4454 with galvanised coating and punched tape material as per IS - 513 deep drawn quality with galvanised coating, having medium barbs (barb length 24+1 mm, Pitch between two barbs 35 + 1 mm) fixed in position and secured to both sides of shaped angle iron post, stretched to a length of 8 to 10 m to achive 600 mm dia as in fencing to steel post and to another coil / MS ribs including fixing with special galvanised fasterners such as 'J' clips, 'C' clips, 'U, clips all as spe-cified and directed . Note : After stretching the coil, the length of the compound wall on which it has been stretched shall be considered for measurement , tenderers are requested to take this in consideration while quoting their rates and no claim whatsoever in this respect shall be considered at any later stage.
M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed
M & L for 25 mm thick pre-formed filler for expansion joints complete all as specified and as directed.
M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying Two coats of synthetic enamel paint over a coat of red oxide primer by using auto roller or airless sprayer machine complete all as specified and as directed.
Prepration of new plastered wall surfaces by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying two coats of cement based paint by using auto roller or airless sprayer machiner complete all as specified and directed
M & L for Broken glass coping on top of walls in CM 1:3 complete all as specified and as directed.
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M in depth and getting out in soft/ loose soil complete all as specified and directed.
M & L for Hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface using broken stone or boulders complete all as directed.
M & L for 100mm thick, PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base of floor, paving, path etc including necessary form work complete all as specified and directed.
M & L for 50mm thick, PCC 1:2:4, type B-2, using 40mm graded crushed stone aggregate as in sub base of floor, paving , path etc complete all as specified and directed.
Removing Excavated soils to a distance exceeding 50 metres but not exceeding 250 metres and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.
M & L for Precast Plain cement concrete solid blocks in 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in bond stones set in CM 1:6 complete all as specified and as directed.
Preparing newly plastered surfaces of walls by using vaccume based hand held or long handle sander machine and applying Three coats of white wash by using auto roller complete all as specified and directed .
M&L for Chequered cement concrete tiles 20 cmX20cmX25 mm thick , set , jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including screed bed of 15 mm thickness in CM 1:6 complete all as specified and as directed.
M/s SIRI CONSTRUCTIONS
V SURYA PRASAD REDDY
N V S S K N SIVA PRASAD
SAI SAMPATH ELECTRICAL AND ENGINEERING
AMBIKAA ENGINEERING
SRI RAJA RAJESWARI ENTERPRISES
pavan putra enterprises
HEVENNY ENGINEERING CONSTRUCTIONS
INDRA CONSTRUCTIONS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .