Utility Shifting work for widening Parappanpoyil to Karakunnath road under Electrical Section Narikkuni

Dismantling (without damage) one HT stay incl. back filling, and bringing back to section store.

Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Dismantling (without damage) one km LT additional conductor line, cross arms, insulators and stacking the conductors in rolls.

Dismantling one section fuse

Cutting trees beyond 30cm but upto and incl. 60cm girth, cutting of trunks/branches, removing the root completely and stacking.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Erection of suspension clamp for LT ABC of any size

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Numbering of Tree (marking for cutting the tree) using yellow enamel paint as specified incl. cost of paint.

Installing one Border Meter with box on existing poles and giving the complete connections incl. conveyance of materials.

Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Renewal of existing damaged/old 11kV PSC/RCC Pole with new PSC pole in place and refitting of all items incl. conveyance (except pole).

Renewal of existing damaged/old 11kV PSC DP with new PSC DP in place and refitting of all items incl. conveyance (except poles).

Renewal of existing damaged/old 11kV PSC/RCC DP with new A type DP in place and refitting of all items incl. conveyance (except poles).

Erecting one LT PSC Pole in position incl. digging & back filling pit.

Dismantling one Channel cross arm from existing DP structure, and bringing back to section store.

Dismantling 100kVA Transformer, erecting new 100kVA Transformer, giving connections incl. loading & unloading at site.

Fitting 6 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Insertion of one LT PSC pole in existing 3ph OH line incl. digging & back filling pit, fitting cross arm, insulator, binding etc.

Fitting and connecting 11 KV FPI

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Additional rate for providing one disc set on any type of HT pole for making cut point.

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

Stringing of one km 11kV line with ACSR Raccoon (3 conductors) incl. cutting and removing tree branches wherever necessary.

Erecting one CT-PT unit to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line.

Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Fitting one set AB switch and giving connection

Conveyance of one km 11kV line materials from section store/stacking place to the work site (excluding poles).

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Insertion of one HT PSC pole in existing HT/LT line incl. digging & back filling pit, fitting cross arm, insulator, binding etc.

Installing one DTR meter with box on existing channel/angle cross-arm on DP structure and giving connections including conveyance

Providing Stay for LT poles incl. digging & back filling pit.

Providing Strut using LT PSC pole incl. digging & back filling pit.

Additional rate for excavation of one Pit for LT Pole/LT Stay in Laterite.

Stringing one km LT Sph 2 wire line (Rabbit) incl. fitting cross arm etc. removing touchings and conveyance of materials.

Stringing one km LT 3ph 4 wire line (Rabbit for Ph, Weasel for N) incl. fitting cross arm etc. removing touchings and conveyance of materials.

Stringing one km LT Addl conductor (Rabbit) after fitting crossarm, but without realigning existing conductor, incl. fitting cross arm, insulator etc. removing touchings and conveyance of materials.

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc.

Insertion of one LT PSC pole in existing Sph OH line incl. digging & back filling pit, fitting cross arm, insulator, binding etc.

Providing WP support with PSC pole incl. digging & back filling pit.

Additional rate for refitting/redoing one Disc set while renewing any type of 11kV cut pole

Re-joining one snapped HT conductor after removing damaged portion incl. re- tensioning and conveyance of all materials complete.

Drilling hole of various sizes on existing Channel/Cross Arm.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one 11kV A type pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking.

Dismantling (without damage) LT stay incl. digging pit in all classes of soil and backfilling

Dismantling (without damage) one km LT Sph 2 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Cutting trees beyond 60cm but upto and incl. 120cm girth, cutting of trunks/branches, removing the root completely and stacking.

Cutting trees beyond 30cm but upto and incl. 60cm girth, cutting branches, removing root completely and stacking (where space for falling trees is not enough).

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint.

Preparing index register (book & soft copy) showing name of Transformer, post numbers, consumer numbers as specified.

Traffic signal painting of pole 1.5m height using black and white paints in alternate rings of 25cm width incl. cost of paint as specified.

Renewal of existing damaged/old 11kV PSC/RCC Pole with new A type pole in place and refitting of all items incl. conveyance (except pole).

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.

Dismantling (without damage) one AB switch from existing structure and bringing back to section store.

Dismantling transformer station in DP structure excluding the rate of dismantling earthing

Dismanling transformer station with transformer erected in plinth excluding the rate of dismantling transformer

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.