REPAIR AND MAINT OF INTERNAL ELECTRIFICATION AND ALLIED WORKS IN VARIOUS UNITS AT DRASS UNDER GE KARGIL

Amount

Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.

M&L for Point wiring with multi-stranded copper conductor PVC insulated and unsheathed FRLS cable in PVC casing and capping, 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connected to common earth including closed recessed wooden terminal Boxes of suitable size made of 2nd class hard wood for mounting switches, sockets etc with 3mm thick laminated sheet cover for one light point or bell/buzzer point controlled by one switch, complete.

All as per Srl item No 02 here in before but for one 3 pin 5 Amps switch socket on same board.

All as per Srl item No 02 here in before but for one 3 pin socket outlet 5 Amps on independent board.

All as per Srl item No 02 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board.

S&F Switch piano flush type 5 Amps, single pole one way.

S&F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.

S&F Switch socket combination 2 in 1, 5 and 15 Amps flush type.

S&F LED 1x18 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F Ceiling rose surface bakelite 65x50mm, two to three terminals.

S&F Bell push, flush type, 5 Amp

S&F Electronic Ding Dong Bell, AC 240 volts single pole, complete all as specified.

S&F in repair Switch piano flush type 5 Amps, single pole one way.

S&F in repair Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.

S&F in repair Switch socket combination 2 in 1, 5 and 15 Amps flush type.

S&F in repair Lamp holder, insulated body with back plate suitable for batten fittings

S&F in repair Ceiling rose surface bakelite 65x50mm, two to three terminals.

S&F in repair Modular socket 6A-2/3 pin combined 2 module

S&F in repair Modular socket 6A and 16 A -2/3 pin combined 2 module

S&F in repair Modular switch 1 way 6A, 1 module

S&F in repair Modular switch 1 way 16A, 1 module

S&F in repair LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F in repair plug top 15 Amp 230 Volt AC.

S&F in repair Sheet metal enclosure for DB's Single door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.

S&F in repair Sheet metal enclosure for DB's single door, single pole and neutral, 240V, 4 way with 200 Amp rated bus bar including blanking plates where required, complete all as specified and directed.

S&F in repair Sheet metal enclosure for DB's single door, single pole and neutral, 240V, 2 way including blanking plates where required, complete all as specified and directed.

S&F in repair 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing and commissioning.

S&F in repair 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 32 Amp in the MCB DB complete with connection testing and commissioning.

S&F in repair 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing and commissioning.

PVC rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size 200x150x50 mm deep

M&L for House Service bracket (hook type) complete with 3.0 m long G.I pipe 40 mm dia (medium grade), two numbers 90° bends, M.S hook and stay including taking down the existing unserviceable bracket. NOTE :- The unit rate shall to include for :- (a) Cutting holes in walls etc. of any description, grouting rag bolts and making good with cement mortar 1:3 including making good finishing to match the existing work and removing rubbish off the premises as directed (in case of bracket being fixed to masonry wall). (b) G.I pipe house service bracket hook type fabricated out of 3.0m long screwed G.I pipe of medium grade and comprising of two number 90° bend (pipe dia) screwed tight to the top ends of the service vertical limb, the two ends of the service provided with two number of turned spit tight fit, well seasoned teak wood bushing and the bracket fixed plumb vertical against the wall with two number flat iron clamps (fabricated out of 50 x 6mm flat iron with 4 No. 16 mm dia ragged bolts of appropriate size with screwed ends, tightened with 16 mm dia nuts with 6 mm thick washer against the clamp tightening collar.

M&L for Sub main wiring with two single core 4 sqmm multistranded copper conductor cable, PVC insulated cable 1100 volts grade and 4 Sqmm as continous earthing drawing and including PVC casing and caping of suitable size with all acessories, complete including taking out of existing wiring all as specified.

S & F Sub main wiring with two single core 6 sqmm multistranded copper conductor cable, PVC insulated cable 1100 volts grade and 6 Sqmm as continous earthing drawing and including PVC casing and caping of suitable size with all acessories, complete including taking out of existing wiring all as specified.

M&L for Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result complete including taking out of existing earthing all as specified.

S&F in replacement 1100 volts grade heavy duty 6 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified.

S&F in replacement 1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified.

S&F in repair LED bulb 9 watt, 230 volts.

S&F in repair LED 1x18 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F in repair round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F in repair LED recess swivel down light fitting 3 Watt 3000 K make: Havells cat part No LHEEGEPBIE1W003 or equivalent approved make, complete all as specified.

S&F in repair LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up three core flexible copper conductor cable of suitable size.

S&F in repair exhaust fan, steel body, AC single phase, 230 V of size 300 mm sweep with blades and frame and louvers.

Supply and fixing in replacement square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing in replacement LED luminarie 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete 6000K/3000K with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S & F in replacement 3 Phase ON LOAD change over switch with side handle in sheet metal enclosure 4 pole of capacity 63 Amp.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 36,825.00 and any other reduction if any from quoted amount.

M/S M A ENTERPRISE

M/S B K ENTERPRISES

M/S Hussani Enterprises Kargil

M/S SK TRADERS

M/S MOHD KHAN

M/S ALI MOHD AND SONS

M/S HIGHLAND ENGINEERING