SPECIAL REPAIRS TO ROOFS AT SMQs AND OMQs AND CERTAIN WORK SERVICES AT IFA OFFICE, DSC MESS AND NEAR MAP QTRS AT AF-I UNDER GE (AF) JAMNAGAR NO.2

Amount

Removal of existing roof treatment consisting of screed bed, tar felts etc, and removal of debris outside MD land complete all as specified and directed.

Excavating in trenches in soft/loose soil n.exc 1.5m wide and n.exc 1.5m in depth for foundation, laying pipes, cables etc n.exc 10Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

Returning, filling including spreading, watering and well ramming in layers n.exc 25 CM in foft/loose and hard/dense soil complete all as specified and directed.

Removing excavated material exc 1.5 km but n.exc 5.0 km and depositing where directed at a level n.exc 1.5M above the starting point complete all as specified and directed.

M&L for M-25 nominal mix type B1 1:2:4 (20mm graded aggreate) Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for M-25 nominal mix type B1 1:2:4 (20mm graded stone aggreate) Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for M-25 nominal mix type B1 1:2:4 (20mm graded stone aggreate) beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for M-25 nominal mix type B1 1:2:4 (20mm graded stone aggreate) in chajjas complete all as specified and directed.

M & L for Pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded aggreagate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate), in roof for padding to achieve the 1:40 slope complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on brick work / concrete surfaces / PCC block / stone masonry wall surface, including mixing liquid water proofing compound in second layer only as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed. Note: WPC will be measured & paid separately.

M&L for rendering 10 mm thick on concrete surface whilst the concrete is green, in cement mortar (1:4) finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacturer instruction complete all as specified and directed. Note: WPC will be measured & Paid separately.

M&L for rendering 10 mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on on ceiling, ifinished the surface even & smooth without using extra cement complete all as specified and directed.

Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Material and labour for water proofing treatment by applying one coat of oil base bituminous primer @ 0.3 Kg / Sqm with brush / roller, laying of 3 mm thick APP based polymer modified membrane reinforced non-woven polyester, weight not less than 3.50 Kg / Sqm and sealing all the over laps 100 mm in length side and 100 mm in width side of membranes laid with torch application complete all as specified and directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls & applying two coat of dry distemper over a coat of chalk whitening compatible primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement Base paint over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering / cladding to wall/ridge, fixed with self tapping screws complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, sides and soffits of foundation and plinth beams complete all as specified and directed.

Formwork to sides of pillars, posts and columns complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, lintels, cantilevers etc complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for Hard Core of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) as in Sub base complete all as specified and directed.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and directed.

M & L for 25 mm thick cement concrete type B0 1:2:4 (using 12.5 mm graded aggregate) as in flooring as a leveling coarse cement concrete surface complete all as specified and directed.

M&L for non skid mat finish (cool) tile for size 300 x 300 and thickness 10 to 12 mm used in terrace / exterior wall / bolcony having Solar Reflective Index (SRI) value not less than 103 and including 15 mm thick screed bed or bedding layer of mortar in CM 1:4, set and jointed in neat cement slurry and point in white or coloured cment to match complete all as specified and directed.

M & L for machine cut & machine polished kota stone slab 20 to 25 mm thick as in kitchen plateform, treads of steps laid over and including 15 mm thick screed bed in CM 1:6, jointed with grey cement slurry mixed with colour pigment to match the shade of the slab, rubbing and polishing complete all as specified and directed.

M & L for Framed work such as grills, gratings, etc. with ends of bars houldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etcforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L Non - skid joint free coloured Ceramic tiles (1st quality) not less than 7mm thick of size exc 0.06sqm but n exc 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 300x450x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat of mortar in CM 1:4 for laying wall tiles finishes complete all as specified and directed.

Supply only liquid water proofing compound

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete all as specified and directed.

Taking down steel water tubing and connection 20mm dia bore and removal from site.

Taking down steel water tubing and connection 25mm dia bore and removal from site.

Supply and laying of GI Tubes 15mm bore, medium grade, galvanised, with all fitting; laid in trenches fittings on walls in any type of masnory or laying in floors complete all as specified and directed.

Supply and laying of GI Tubes 20mm bore, medium grade, galvanised, with all fitting; laid in trenches fittings on walls in any type of masnory or laying in floors complete all as specified and directed.

Refixing of GI Tubes 20mm bore, medium grade, galvanised, with all fitting; laid in trenches fittings on walls in any type of masnory or laying in floors complete all as specified and directed.

Supply and laying of GI Tubes 25mm bore, medium grade, galvanised, with all fitting; laid in trenches fittings on walls in any type of masnory or laying in floors complete all as specified and directed.

Refixing of GI Tubes 25 mm bore, medium grade, galvanised, with all fitting; laid in trenches fittings on walls in any type of masnory or laying in floors complete all as specified and directed.

Disconnecting existing tanks exc 500 ltr and n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning repairing, etc. complete all as specified and directed.

Supply and fix 10 Litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle, flush pipe 32 mm , PVC connection 450 mm fixed in position and connecting complete all as specified and directed.

S&F white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, with plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connections complete all as specified and directed.

Supply and fix white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 440 mm white with integral foot rests with cast iron ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and directed.

S&F white vitreous china wash hand basin of size 550 x 400 mm, fixed over & including MS brackets comprising of the following items:- (a) Waste fitting 32 mm dia brass chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete. (b) 15 mm size Pillar tap fancy typev cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe complete . (c) LDPE/PVC waste pipe 32 mm dia 1000 mm long complete.

S&F 15 mm size bib cock, short body cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed. Make: Plumber cat part No EC-0202 or equivalent make mentioned in Appx 'B' to PS.

S&F 15 mm size bib cock, long body cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed. Make: Plumber cat part No EC-0203 or equivalent make mentioned in Appx 'B' to PS.

S & F brass chromium plated overhead shower 125 mm size with 225 mm arm and flange for 15 mm inlet pipe complete all as specified and directed.

Taking down rainwater / drain pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

S & F PVC (SWR) junction single, 110mm (Single T) equal or unequal complete all as specified and directed.

S & F PVC (SWR) junction single,75mm (Single T) equal or unequal complete all as specified and directed.

S & F PVC (SWR) floor trap,75mm plain with grating including jointing with solvent cement complete all as specified and directed.

S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M & L for PCC 75 mm thick 1:3:6 type C2, (using 40 mm graded stone aggregate) as in plinth protection complete all as specified and directed.

M&L for repairing of chajja / roof projection by taking down old plaster, damaged concrete surface, cutting of exposed reinforcement and making good with 1:4 including admixture of SBR (cost of SBR including) as per manufacture, and provide reinft cement concrete 1:2:4 type B1 as required, necessary scafolding,formwork etc up to 9 Mtr heigh and applying 10 mm thick rendring in cement mortar 1:3 , finishing the surface even & smooth with out using extra cement complete all as specified and directed. Note : Reinft will be paid separately.

M & L for roughening existing ceiling surface including removal of extra loose concrete sand remainng spalling, treating the old steel surface and concrete with nitrobond chemical for bonding old concrete and steel with new concrete and splashing concrete 1:1 / 2:3 using 0-6 mm the stone agreegate up to 25 mm thick in two three oprations and finishing finally with 10 mm thick cement mortar 1:4, including necessary scaffolding etc complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for point wiring with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5sqmm (nominal area) cable using approved colour code as per IS drawing concealed conduit with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLS) copper conductor cable of size 1.5sqmm as continous earth wire connected to common earth and erth dolly complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or froof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed. Make of wire: L&T / RR Kabel / Finolex

(a) One Light/Fan point controlled by one switch

(b) One 3 pin socket outlet 5Amps on the same board with other switches

(c) One 3 pin 5 Amp socket out let controlled by one 5 amp switch on independent board

M&L for point wiring with PVC insulated and unsheathed multistranded FRLS copper conductor single core 2.5sqmm (nominal area) cable using approved colour code as per IS drawing in concealed conduit with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet (HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLS) copper conductor cable of size 2.5sqmm as continous earth wire connected to common earth and earth dolly complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or froof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed. Make of wire: L&T/RR Kabel/Finolex

M&L for Ceiling rose, 2 to 3 terminal PVC/ polucarbonate, isolated body type suitable for AC 230volts complete all as specified and directed. Make : Kolors/Crabtree/SSK

M & L for module cover plate with frame as per site requirement for following module:- Make : Legrand/C&S Electric/Havells

(a) 4 module

M & L for Modular metal Flush box as per site requirement. Make : Legrand/C&S Electric/Havells

(a) 4 module

M & L for modular switch 1 way 6 Amp 1 Module, complete all as specified and directed. Make : Legrand Arteor series Cat Part No : 573400 / Kolors (Krest-white) / Crabtree or equivalent makes mentioned in Appx 'B' to PS.

M & L for Modular Switch 1 way 16/20 Amp 1 Module, complete all as specified and directed. Make :- Legrand Arteor series Cat Part No : 573410 / Kolors (Krest-white) / Crabtree or equivalent makes mentioned in Appx 'B' to PS.

M & L for Modular Socket 6A 2/3 Pin universal 2 module, complete all as specified and directed. Make : Legrand Arteor series Cat Part No : 573470 / Kolors (Krest-white) / Crabtree or equivalent makes mentioned in Appx 'B' to PS.

M &L for Modular Socket 16A/6A 2/3 Pin combined 2 module, complete all as specified and directed. Make : Legrand Arteor series Cat Part No : 573471 / Kolors (Krest-white) / Crabtree or equivalent makes mentioned in Appx 'B' to PS.

M & L for Modular fan step regulator 120 watt 2 module, complete all as specified and directed. Make : Legrand Arteor series Cat Part No : 573416 / Kolors (Krest-white) / Crabtree or equivalent makes mentioned in Appx 'B' to PS.

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed. Make : Wipro cat part No.LL20-221-XXX-65NE3 / Philips cat part no. BN O21C LED120S PSU CDL/NW GR(6500K) / HAVELLS or equivalent makes mentioned in Appx 'B' to PS.

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 10 watt, channel housing & diffuser of length 600 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed. Make : Wipro cat part no.LL20-111-XXX-65NE3 / Philips cat part no. BN O21LED10S(6500K) / HAVELLS or equivalent makes mentioned in Appx 'B' to PS.

M&L for Sub main wiring using PVC insulated and unsheathed multi stranded FRLS copper conductor cable using approved colour code as per IS drawing in and incl PVC conduit of suitable size with all accessories and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete as specified and as directed of the following sizes of cables:-

Using two single core PVC insulated FRLS cable 6 sqmm copper conductor multi stranded and 6.0 sqmm copper conductor insulated cable using as earth wire Note : 2runs of 6sqmm copper cable & 1 run of 6.0 sqmm copper cable in and including 25mm PVC casing capping shall be measured as one unit

M & L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 4 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management,reversible door for for IP 43 & IP 54, single pole and neutral 250 Volts, flush to wall complete with IP 54 protection complete all as specified and directed. Make : Legrand Model: IP 54 IK 09 507641 / Ekinox / L & T (Hager) / Schnieder (Multi-9) or equivalent makes mentioned in Appx 'B' to PS.

M&L for MCB single pole & neutral 240 volt C curve 10 KA 32 Amps capacity IP 20 complete all as specified and directed. Make - Legrand / Siemens / Hager

M&L for MCB single pole,5 to 32 Amp 240 volt C curve 10 KA, IP 20 complete all as specified and directed. Make - Legrand / Siemens / Hager

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed.

sanu enterprise

RACON CONSTRUCTION