BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

Total Amount Rs:-

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Demolition including stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of serviceable materilas

2.00 and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar. 17.48 Cu.M. 536.09

Excavation for foundation upto 1.5M depth including dewatering & sorting out and

3.00 stacking of useful materials and disposing of the excavated stuff upto 50 Meter Lead. 613.38 Cu.M. 117.08

Loose or Soft Soil.

Excavation for foundation 1.5M to 3.0M depth including dewatering & sorting out and

stacking of useful materials and disposing of the excavated stuff upto 50 Meter Lead.

Loose or Soft Soil.

Filling available excavated earth (exluding rock)in trenches plinth,sides of foundation

5.00 etc.in layer not exceeding 20cm in depth consolidating each disposited layer by 817.70 Cu.M. 130.40

ramming and watering.

Filling, Foundation & Plinth with murrum or selected soil in layers of 20 cms thickness

including watering , ramming and consolidation etc complete. lead upto 10.00 km

Providing and laying cement concrete 1:3:6 ( 1: Cement : 3- Coarse Sand : 6- hand

7.00 broken stone aggregates 40mm nominal size) and curing complete excluding cost of 91.61 Cu.M. 3005.76

formwork in (A) Foundation & Plinth

Providing and laying controlled cement concrete M250 and curing complete including

the cost of formwork but excluding reinforcement for reinforced concrete work in

Foundation, footing, Base of Columns and mass concrete

Providing and laying controlled cement concrete M250 and curing complete including

9.00 the cost of formwork but excluding reinforcement for reinforced concrete work in 68.40 Cu.M. 7400.58

Column, upto two floor level.

Providing and laying controlled cement concrete M250 and curing complete including

10.00 the cost of formwork but excluding reinforcement for reinforced concrete work in 137.65 Cu.M. 6656.73

Beams upto two floor level.

Providing and laying controlled cement concrete M250 and curing complete including

11.00 the cost of formwork but excluding reinforcement for reinforced concrete work in 149.81 Cu.M. 6225.44

Shelves, Lintel, slab, landing upto two floor level.

Providing and laying controlled cement concrete M250 and curing complete including

12.00 the cost of formwork but excluding reinforcement for reinforced concrete work in Wall 16.15 Cu.M. 6126.58

providing and mixing water proofing material in cement in mix proportion

13.00 recommended by the manufacturers. 765.98 Lit 49.16

Brickwork using common burnt clay building bricks having crushing strength not less

14.00 than 35kg/Sq.cm. In foundation and plinth in Cement mortar 1:6 ( 1-Cement :6- Fine 64.95 Cu.M. 4021.03

Sand ) (B) Conventional

Brickwork using common burnt clay building bricks having crushing strength not less

than 35kg/Sq.cm. In foundation and plinth in Cement mortar 1:6 ( 1-Cement :6- Fine

Sand ) (B) Conventional. Extra for brickwork in super structure above floor two level

Half brick masonary in common burnt clay building brick having crushing strength not

less than 35 kg/sq.cm. In cement mortar 1:4 ( 1 cement : 4 coarse sand ) in foundation

16.00 and plinth (B) Conventional +Extra for brickwork in super structure above floor two level 90.65 Sq.mt. 640.33

For Stair cabin.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding

and placing in position complete upto floor two level

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or

half brick walls for interior plastering upto floor two level and finished even and smooth

18.00 in (i) Cement mortar 1:3 (1-cement:3-sand) 1664.43 Sq.M. 194.08

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF ENTRANCE, KITCHEN & TOILETBLOCK AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing 20mm thick sand faced cement plaster on walls upto height 10mt. Above

ground level consisting of 12mm thick backing coat of C.M. 1:3 ( 1-cement : 3-sand )

19.00 and 8mm thick finishing cost of C.M.1 :1 ( 1-Cement : 1-Sand) etc. complete. 748.29 Sq.M. 335.66

Providing texture plaster on Rough plaster for exterior plastering upto floor two level as

per Instruction of Engineer in-charge

21.00 Providing throating or plaster drip and moulding ao R.C.C. Chhajja 133.42 R.M. 41.00

Providing 20mm thick cement plaster in single coat on single or half brick walls for

interior plastering upto floor two level and finished even and smooth in (ii) Cement

22.00 mortar 1:4 (1-cement :4 sand)Extra over item for providing and mixing water proofing 480.60 Sq.M. 268.79

materials in cement mortar in proportion recommended by the manufacturer.

Providing and fixing clay roofing tiles (pan type type as specified), machine pressed and

kiln-burnt, of approved shape, size, and colour, laid to the required slope over inclined

suface.properly aligned, overlapped, and securely fixed with adhasive material, sealing

joints, and ensuring watertight finish.including all materials, labour, lead and lift,

scaffolding etc. complete as directed by Engineer-in-Charge.

Providing and laying 48" x 24" Vitrified tile (Pattern -Carving) 8mm thick tiles flooring

over 20mm (Average) base of Cement Mortar 1:6 (1-cement : 6-coarse sand) or by

chemichal on new surface or fixing on existing flooring/ wall by adhesive materials

including dismentalling of existing flooring and jointed with colour cement slurry

including finished with 4 mm thick grouting & cleaning the surface etc. complete for

digital color Shade.

Providing and laying coloured glazed tiles of thesize 300 mm x 200 mm x 8 mm /

mm x 450mm x 8 mm in skirting, risers of steps and dedoon 10 mm. thick cement

plaster 1:3 (1 cement :3 coarse sand) & jointed with white cement slurry.

providing and laying Granite slab flooring or dedo over 20 mm base of cement mortar

26.00 1:6 (1 cement :6 coarse sand ) or L.M. 1:1.5 laid & jointed with gray cement slurry 275.91 Sq.M. 2814.16

including rubbing and polishing complete.

27.00 Labour Charges For Half Round edge for Granite 507.23 R.M. 85.85

Providing and fixing decorative CNC laser cut stainless steel door of approved design

and pattern, fabricated from SS 304 grade sheet of minimum 3 mm thickness (or as

required) including necessary SS frame of suitable section, properly welded and finished

smooth. CNC laser cut as per approved drawing, reinforced with stiffeners wherever

required, and finished with approved powder coating of desired shade. with necessary

28.00 locking arrangement including heavy-duty mortise lock, SS handle, tower bolts, hinges, 11.93 Sq.M. 8080.00

stopper and all required hardware including cutting, welding, grinding, buffing,

polishing, fixing in position with anchor fasteners, complete in all respects including all

materials, labour, tools & tackles, scaffolding, lead and lift as per directed by Engineer-in-

Provoding and fixing flush door shutters, solid core construction with frame of first class

hardwood with cross board and face veneer or plywood face panels, including anodised

alluminium butt hinges with necessary screws. (B) Non-decorative type and block board

29.00 core anodised alluminium butt hinges in flush door shutters (2) 35 mm thick. 17.28 Sq.M. 2689.80

Extra for using bright finished M.S. piano hinges of (A) Nickel plated piano hinges.

Providing and fixing FRP FRAME size 100 x 50 mm and 28 mm thick FRP degree panel

shutters having extra reinforcement on sides and edges and in gel coat finish. The core

of the shutter is to be filled up with injected fire retardant grade polyurethane form

done in situ along with embedded wooden pices for stiffening and also for taking

30.00 hingies and fixtures. The whole FRP frame and shutter is to be water proof, weather 12.60 Sq.M. 2377.77

proof, terminte proof and resistance to mild acid/alkali, rates are to be inclusive of S.S>

hinges with necessary screws and alluminium fixtures and fastning product should have

3 years performance guarantee and company have ISO 9001-2000 certificte.

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF ENTRANCE, KITCHEN & TOILETBLOCK AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing 50 microns powder coated aluminum Domal aluminum sliding

windows using three track section (Jindal or equivalent) of dimension 101 X 36.5 X

1.6mm thick (or equivalent), shutter sections of dimension 27X 65 X 1.5 mm thick (or

equivalent), inter lock strip of section and forfixed using Jindal or equivalent section,

31.00 with three shutters of 5 mm thick toughened tinted glass, EPDM gaskets, locking 20.52 Sq.M. 7575.00

arrangements including all quality accessories and installation atsite. Including cost and

conveyance of all materials, labour charges, specified color etc., complete as per

directed by engineer in charge.

Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using

water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender

channel of size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x

mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at

32.00 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at 136.14 Sq.M. 606.95

edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting

cleat,joining compound top coat on ceiling incl.making necy.opening for light

fitting,diffuser etc. comp. as per detail drawing as directed

Providing and fixing VOX false ceiling made from premium quality PVC / engineered

ceiling panels, installed on a concealed GI suspension framework hung from the RCC

slab using approved hangers and fasteners. The ceiling panels shall be lightweight,

moisture-resistant, termite-proof, fire-retardant, and suitable for humid areas as well as

residential and commercial interiors. Panels to be neatly aligned with uniform joints,

finished with matching trims and accessories. Work includes cutting, fixing, leveling, and

providing necessary openings for light fixtures, air-conditioning diffusers, and other

services, complete as per manufacturer’s specifications and directions of the engineer-

Providing and fixing M.S. grills of required pattern to wooden frame of windows with M.

S. flat at required spacing & frame alround, square or round bars with round bars with

round headed bolts and nuts or by screws.

Painting two coats ( including priming coat ) on new steel and other metal surface with

35.00 snthetic enamel paint ,brushing to give an even shade including cleaning surface of all 43.44 Sq.M. 100.48

dirt, dust and other foreign matter.

Applying two coats of putty & two coats of primer of approved brand and manufacture

on new wall surface to give an even shade including thoroughly brushing the surface

free from mortar dropping and other foreign matter and sand papered smooth.

Wall Painting (Two coats) with plastic emulsion paint of approved brand & manufacture

on under coated wall surface to give an even shade including throughly brushing the

surface free from mortar dropping and other foreign matter and sand papered smooth.

Finishing Wall with Weather Proof Exterior Emulsion Paint on wall Surface (Two Coats)

to give an required shape even shade after throughly brushing the surface free from

mortar dropping and other foreign matter and sand papered smooth. Extra over Item

51 for every subsequent coat of water proofing cement paint of approved brand and

Providing laying and jointing in true line and level 25 mm dia. U.P.V.C. Pipe (SCH -40)

line including fittings make or equivalent as apprroved by Engineer In charge. Pipe shall

be fixed on the wall with the help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Providing erecting and fixing double coated ISI water tank of required capacity each

with all necessary fittings and connection etc. complete on terrace

Providing and fixing Ball Cock of Approved Quality as Directed

41.00 ( A ) Copper Metal 2.00 Nos 132.89

( I ) 25 mm dia.

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF ENTRANCE, KITCHEN & TOILETBLOCK AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing laying and jointing in true line and level 15 mm dia. U.P.V.C. Pipe (SCH -40)

line including fittings make or equivalent as apprroved by Engineer In charge. Pipe shall

be fixed on the wall with the help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 35 mm dia. U.P.V.C. Pipe (SCH -40)

line including fittings make or equivalent as apprroved by Engineer In charge. Pipe shall

be fixed on the wall with the help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Providing and fixing Urinal of approved quality including connection with trap and with

44.00 integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 1.00 No. 1541.44

Providing and fixing Counter wash Basin (7778) with Snow White Wash Basin ( 610 X

460 ) mm with Waste Coupling ( ALD - 705 Waste coupling 32mm size full thread with

80 mm height ) & Bottale Trap (ALD - 769 , bottle trap with internal partition 32 mm

size with 250mm & 190mm long wall connection pipes & Wall Flange ) and C.P. pipe etc.

complete as per directed by Engineer in charge.

Providing and fixing Bib cock with wall flange (FUS-29037) incl. fixing in pipe line etc.

Providing and fixing Angle Cock (FLR-5053N) incl. fixing in pipe line etc. complete

48.00 Providing and fixing Pillar cock (FUS-2901) incl. fixing in pipe line etc. complete 7.00 No. 1599.84

Providing and fixing Brass screw down stop tap

( C) 25 mm dia.

Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 75 mm diameter with jali

of the following nomonal diameter of self cleansing design with C.I. scread down or

hinged grating including the cost of cutting and making good the walls.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making good the wall ceiling and floor.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making good the wall ceiling and floor.

Providing and fixing in position cowel vent to pipes.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water

54.00 tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) 9.00 Nos 1246.92

Square mouth traps.(B) 150mm x 100mm size P or R type

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including

55.00 500mm x 450mm C.I. horizontal grating wih frame 8.00 Nos 2017.20

Provide and fixing Urinal of approved quality connecting the urinal fixing with cast iron

bracket , etc. complete. (A) urinal (5005) snow white colour size 670 x 335 x 365 mm.

with Waste Coupling ( ALD - 705 Waste coupling 32mm size full thread with 80 mm

56.00 height ) & Bottale Trap (ALD - 769 , bottle trap with internal partition 32 mm size with 3.00 Nos 12610.86

250mm & 190mm long wall connection pipes & Wall Flange ), C.P. pipe and Division

Plate (700 x 340 x 120 mm) etc. complete as per directed by Engineer in charge.

Providing and fixing water closet Squtting pan (Indian type W.C. pan) size 580 mm

57.00 (earthwork, bed concrete, foot rests and trap to be measured and paid for separately) 1.00 No. 933.78

(A) Vitreous china (i) Long patter-white colour

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF ENTRANCE, KITCHEN & TOILETBLOCK AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing wall Hung EWC'S PALAZZO (3148) Snow White Colour With ( A )

EWC Wall Hung 'P' 560 x 380 x 360 mm including Seat Cover, Outlet Gasket, Inlet

Gasket, Cast Iron Chair Bracket, Health Faucet (ALD-CHR-593) etc. complete as per

directed by Engineer in charge.

Providing and fixing Metropole Flush valve (FLV-1095G) incl. fixing in pipe line etc.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base

of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

60.00 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match 5.96 Sq.M. 989.45

the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted

61.00 on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass 7.00 No. 833.74

screws and washers.

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity

150 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should

drop by 150C within a hour, The water cooler should be comprising of hermetically

62.00 sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating, 1.00 No. 55893.40

coil, thermostats, relay etc.complete with necessary inlet & outlet connection. The body

of water cooler will be made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S.

powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter,

carbon filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type

post carbon filter auto low & high pressure switches with following size of storage tank

& LPH capacity & erected as directed with one year comprehensive maintenance

guarantee.[B] 25 Ltr / Hr with 30 Ltr.

Providing, fabricating, supplying, and fixing outdoor CNC cut stainless steel name board

made of approved quality stainless steel sheet of grade SS 304 / SS 316, of specified

thickness, cut by CNC laser for accurate lettering and design as per approved drawing,

layout, size, and font. The surface finish shall be mirror polished / satin / hairline / matte

as approved. All edges shall be smooth and free from burrs. The name board shall be

64.00 weatherproof and suitable for outdoor installation, complete with stainless steel stand- 10.00 Sq.Mt. 18180.00

off spacers / concealed fixing arrangement, necessary anchors, bolts, and accessories.

The item includes transportation, handling, erection, alignment, fixing at all heights,

cleaning, and making good the surface, complete in all respects as per directions of the

Engineer-in-Charge.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

mtr length , in below type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type switch and hum free EME

step type electronic fan regulator mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on / in wall / ceiling

as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF ENTRANCE, KITCHEN & TOILETBLOCK AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

67.00 textured / metallic/white front plate modules erected on / in wall / ceiling with 4.00 pts 257.55

following type accessories

Providing & erecting following type of Modular Type Accessories with necessary

connection. As desired by Engineer In charge

(2) 16 Amp. SP one way switch

Providing & erecting following type of Modular Type Accessories with necessary

connection. As desired by Engineer In charge

(3) 6/16Amp. Universal socket

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

70.00 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of 480.00 mtr 82.82

green colour for earth continuity of following size (a) with medium class Rigid PVC pipe

and accessories (c) 3 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed in /flushed on

71.00 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of 360.00 mtr 102.01

green colour for earth continuity of following size (a) with medium class Rigid PVC pipe

and accessories (d) 3 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size (A) with medium class Rigid PVC pipe and accessories

(f) 3 wire 10 sq. mm (use earth wire of 4 sq.mm )

Providing & Erecting following Shockproof tissino type accessories erected on 3 mm

73.00 thick PC (Polycarbonate) sheet in PVC/ Metal/Wooden Box. erected on wall/ ceiling. (8) 25.00 Ea 22.22

Bakelite lamp holder

Supplying KITKAT pattern porcelain cut-out fuse with base of following current capacity

erected on existing block board. (v) 100 A. 500 V

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

75.00 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 20.00 Ea 112.11

existing box. confirming to IS 8828/1996 with ISI Mark cat III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having

76.00 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 4.00 Ea 737.30

(c)63 Amp cat III

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF ENTRANCE, KITCHEN & TOILETBLOCK AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved make OEM has to submit

test certificate) & having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary test report must be

(b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having 3 blades aluminium

79.00 body and blade sets having ornamental design shanks , canopy erected with earthing. [ 8.00 Ea 2311.89

Make shall be approved by Engineer in Charge]

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.9, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT

3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %(

fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to

housing complete.IP20, (iii) 12-15 watts, 6" x 6", Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT

3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %(

fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to

housing complete.IP20, (iv) 18 to 20 watts, 8" x 8", Surge- 2 KV Cat-lll

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL CORPORATION, NADIAD.

CONSTRUCTION OF ENTRANCE, KITCHEN & TOILETBLOCK AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT

3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %(

fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)(D) LED Strip Light (i) Minimum 4.8W-120

LED per meter (2 wire, IP-65) with non integral suitable Driver complete Cat-lll

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver

84.00 efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below 10.00 Ea 7266.95

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

(iv) above 90 to 120 watts

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

CONSTRUCTION OF COMPOUND WALL AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Excavation for foundation upto 1.5M depth including sorting out and stacking

of useful materials and disposing of the excavated stuff with all Lead.

Loose or Soft Soil.

Providing and laying cement concrete 1:3:6 ( 1: Cement : 3- Coarse Sand : 6-

hand broken stone aggregates 40mm nominal size) and curing complete

2.00 excluding cost of formwork in 6.28 Cu.M. 3005.76

(A) Foundation & Plinth

Providing and laying cement concrete M250 and curing complete including the

cost of formwork but excluding reinforcement for reinforced concrete work in

( A ) Foundation, footing, Base of Columns and mass concrete

Providing and laying controlled cement concrete M250 and curing complete

including the cost of formwork but excluding reinforcement for reinforced

concrete work in

Providing and laying cement concrete M250 and curing complete including the

5.00 cost of formwork but excluding reinforcement for reinforced concrete work in 5.52 Cu.M. 6656.73

( c ) Lintel ,Beams, upto two floor level.

Brickwork using common burnt clay building bricks having crushing strength

not less than 35kg/Sq.cm. In foundation and plinth in Cement mortar 1:6 ( 1-

6.00 Cement :6- Fine Sand ) 13.25 Cu.M. 4289.33

(B) Conventional

Extra for brickwork in super structure above floor two level

Filling available excavated earth ( excluding rock ) in trenches, plinth, sides of

7.00 foundation etc. in layers not exceeding 20cm in depth consolidating each 66.72 Cu.M. 130.40

deposited layer by ramming and watering.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering upto floor two level and finished

even and smooth

Providing in (i) M.S.

and fixing Cement mortar

grills 1:3 (1-cement:3-sand)

of required pattern to wooden frame of

windows with M. S. flat at required spacing & frame alround, square or round

10.00 bars with round bars with round headed bolts and nuts or by screws. 5760.00 Kg. 101.18

Painting Three coats ( including One Coat priming coat & Two Coat enamal

Paint) on new steel and other metal surface with snthetic enamel paint

11.00 ,brushing to give an even shade including cleaning surface of all dirt, dust and 216.00 Sq.M. 100.48

other foreign matter.

Providing texture plaster on Rough plaster for exterior plastering upto floor

two level as per Instruction of Engineer in-charge

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

CONSTRUCTION OF COMPOUND WALL AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Finishing Wall with Weather Proof Exterior Emulsion Paint on wall Surface

(Two Coats) to give an required shape even shade after throughly brushing

the surface free from mortar dropping and other foreign matter and sand

papered smooth.

Extra for every subsequent coat of water proofing cement paint of approved

brand and manufacture.

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

CONSTRUCTION OF R.C.C ROAD, PAVER BLOCK & LANDSCAPING AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Filling, Foundation & Plinth with murrum or selected soil in layers of 20 cms

thickness including watering , ramming and consolidation etc complete. lead

Box cutting the road surface to proper slope and camber for making a base for

2.00 road work including ramming the excavated stuff and despositing on the road 38.40 Cum 207.40

side slope as directed up to 50 mt. lead.

Providing & laying spreading and compacting WBM Grade - II of B.T.M.C. metal

25mm to 90mm size (hand brocken) including using 20% (13+7%) filler i.e.

stone screeing 13.2 mm at the rate 0.16 Cumt. & 0.08 stone dust including

spreading in uniform thickness hand packing rolling with vibratory roller8-10

tonnes in stages to proper garde and cmaber applying and brooming required

types of screening/binding materials to fill up the interstices of coarse

aggregate watering and compacting to the required density.

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6-

hand broken stone aggregates 40 mmnominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M.250 and curing complete

5.00 excluding the cost of formwork and reinforcement for reinforced concrete 57.60 Cum 4235.01

work in (A) Foundations, footings, Base of columns and Mass concrete.

Providing & Laying M.S. Side rail of road thickness with necessry nut boit

plates, fixing as per width applaying plates vibrator, electric or diesel on

channel comp. with V.D. Systems (Trimix) by using the necessary

equipments 7 material & Machinery, such as running screed vibrator on

prelaid M.S. channel for leveling vaccum pumps, floating & power trowling

etc. compl. also including gruv cutting and filling joint with bituminous

every 5 mtr. applying 4.50 kg / Sq.Mt. meatalic hardner.

Providing TMT Bar FE 550D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design Confirming to IS 15658 :

2006 including 35 mm Sand layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

supplying per stacking

approvedofdesign

+ cattle excavation for fixing100

manure minimum in proper

each material at site including royalty and carriage upto 5 km lead complete

including Mixing earth and sludge or manure and Spreading of sludge, dump

manure and/or good earth(earth measured in stacks will be reduced by 20%

Providing & laying new Australian lawn including planting mehandi (Lawsonia

inermis) in line as per directed by Corporation

Plantation of Trees, Shrubs, Hedge, ground covers and seasonal plants at site

i/c watering and removal of unsaverieable material’s as per direction of officer

in charge (excluding cost of plant & water). - Trees plant

Foxtail palm ht. 240-270 cm bottom girth 35-40 cm well developed in big size

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

CONSTRUCTION OF R.C.C ROAD, PAVER BLOCK & LANDSCAPING AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Plantation of Trees, Shrubs, Hedge, ground covers and seasonal plants at site

i/c watering and removal of unsaverieable material’s as per direction of officer

in charge (excluding cost of plant & water). - Shrubs plant

Providing and stacking of Nerium oleander (kaner)/ Cassia laevigata/

Largerstroemia indica/ Nerium oleander variegated of height 60-75 cm. with 5-

6 branches in poly bag of size 25 cm as per direction of the officer-in-charge.

Providing & planting new plant by Block / Strip plantation (from List) as per

directed by Corporation

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLY AND ERECTION WORK OF CCTV CAMERA & AUDIO SYSTEM AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

4 MP BULLET VERYFOCAL NETWORK CAMERA

Image sensor-1/2.9' cmos,resolution-2688(H) x 1520(V),min illumination-0.006

[email protected] ( color, 30 ire),0.0006 [email protected] ( b/w, 30 ire),0 lux ( illuminator on

),illuminator distance- up to 60 m ( 196.85 ft) ( ir led ), pan: 0-360, tit: 0-90,

1.00 Video compression:- h.265; h.264; h.264h: h.264b; mjpeg, certificaion:- CE- 10.00 Nos 10962.54

LVD : EN62368- 1, CE-EMC : ELECTROMAGNETIC COMPATIBILITY DIRECTIVE

2014/30/EU; FCC: 47 CFR PART 15, SUB PART B; ,UL/UCL: UL62368-1 &

CAN/CSA C22.2 NO.62368-1-14

3.00 16 PORT POE SWITCH 1.00 Nos 11089.80

4.00 HARD DISK 4 TB 1.00 Nos 12661.36

6.00 HEAVY CAMERA BOX 10.00 Nos 151.50

7.00 CAT 6 CABLE WITH PVC PIPE LAYING 200.00 MTR 75.75

8.00 FIBER CABLE WITH HDPE PIPE LAYING 150.00 MTR 282.80

9.00 INSTALLATION CHARGE 10.00 Nos 757.50

10.00 SFP MODUAL 4.00 Nos 2272.50

11.00 43' INCH LED TV 1.00 Nos 29795.00

Computer System

Processor-12th Gen Intel® Core™ i7-12700 (25 MB cache, 12 cores, up to

GHz Turbo), Operating System- Windows 11 Home, Graphic card - Intel® UHD

Graphics 770 with shared graphics memory, RAM -8GB DDR5, 1x8GB, at

MT/s, ROM- 512GB M.2 PCIe NVMe Solid State Drive, Realtek Wi-Fi

RTL8852BE, 2x2, 802.11ax, MU-MIMO, Bluetooth® wireless card, 22" LED

Monitor, Key board and Mouse with basic software and 1 year anti virus

software (Make-Dell)

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING & ERECTION OF FURNITURE AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Medium back revolving & tilting chair Providing and supplying Medium back

chair with Metal frame work. Upholstered with changeable fabric

upholstery covers (as per requirement) and molded PU foam, together

with molded seat & back covers. The back foam should be designed

with contoured lumber support for extra comfort. Caster of high durability

& hydraulic. The chair should have cylinder with 5 years warranty. The size of

1.00 chair 47.5cm x 58cm (Back side) and 49cm x 48cm (seat size). The PU foam 1.00 Nos. 15655.00

should be molded with density =45 ± 2 kg/m3. With One-piece armrests.

The armrests are scratch and weather resistant. The permanent contact

mechanism is designed with 360° revolving type, with pneumatic height

adjustment & 17° maximum tilt only & tilt tension adjustment facility. As per

Instruction of EIC & User Department

Providing and supplying Visitor or Guest chair the

seat & back are made of 12mm thick hot- pressed plywood upholstered

with changeable fabric upholstery covers (as per requirement) and molded

PU foam, together with molded seat & back covers. The back foam should

be designed with contoured lumber support for extra comfort. The size of

2.00 chair 45cm x 38cm (Back side) and 45cm x 43cm (seat size). The PU foam 3.00 Nos. 6565.00

should be molded with density =45

± 2 kg/m3. The armrests with Leg made with Powder coated MS structure as

per architect selection. The Seat and backfixed with MS structure with

required necessary hardware. As per Instruction of EIC & User Department.

Providing and supplying Table made with 19mm Thk.

Plywood structure finished with 1.0mm Thk. decorative laminate on outside

portion & 0.8 mm Thk. liner Laminate inside as specified & approved by

architect with fixed with necessary fixtures and fastening (Hardware) .

Provide Plastic Computer Desk Table Grommet Cable Wire Outlet Hole Cover

60mm, Key-board trey, S.S. legs, Drawers with telescopic roller channels,

Handle and locking arrangements with all necessary fixtures and fastening.

Provide Shutters fixed with handle, hinges, magnet, complete with bidding

patties and all required hardware. Provide footrest. All exposed edges shall be

covered with required Teak wood beading Patti finished with approved

melamine polishing work. Complete as per instruction of architect &

engineer in charge.

Three seated sofas

Providing and supplying sofa. (3 seated) made with

using 19mm Thk. Plywood structure frame with S.S. legs required

necessary support fixed with necessary fixtures and fastening (Hardware) .

It shall be covered with 32 Density PU foam with required Thickness as per

4.00 design in seat & back and handle portion this should be again covered with 4.00 Nos. 29582.90

14mm thick PU foam with Madarpat cover on it & upholstered fabric or

leather of suggested & approved by architect finished with seat, back & all

visible side. Complete as per instruction of architect & engineer in charge.

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING & ERECTION OF FURNITURE AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Steel cupboards with Glass Providing & Supplying GLASS DOOR CABNET having

Size - 1980 mm Height X 900 mm Width X 480 mm Depth. The design of Glass

door cabinet shall be as above in the figure. CR sheet 1.0 mm thick Confirming

to IS - 513. Shelf 4 nos. forming five compartments. Edge first bending 30 mm

and second edge bend 8 mm and depth of shelf 400 mm. Plan glass 5 mm /

mm thick on each side of door with suitable cushion pads. The glasses shall fit

in an additional frame of top section which is fixed to shutter frame from

inside. Machine made lever plate (Patla) with brass bush or machine made six

lever type patla which is fixed in height wise or width wise of cabinet. Lever

rod 10 mm round. Hinge sand brackets three nos. on cach side size 75 H x

mm thick mm and 1.6 mm thick sheet for brackets. Die cast handle door

metallic, nickel : / chrome plate with double nut. Key cover of best quality

metallic, nickel / chrome. Lock- Godrej Type cabinet lock / Grace 6 Lever. Leg

75 x 75 mm duly welded are riveted.

Providing and supplying Roller Blinds assemblies are to be supplied &

installed in all windows with great precision. It should bewater resistant

6.00 and fitted on aluminum head rails duly powder coated and fitted with 16.20 Sq.Mt. 2858.30

stainless steel drive rods. Manual operated and should have ISI

mark.Complete or as directed as per architect & engineer in charge.

Centre Table/ Corner Table/Tipoi. Providing and supplying Center

Table/Corner Table/Tipoi with Glass top made with 19mm thk. plywood

finished with 1.0 mm thk. Decorative laminate sheet specified and approved

by architect & fixed with necessary fixtures and fastening (Hardware) inclusive

of approved melamine polishing work. Top part of center table covered with

8mm thk. toughened Glass with polished Edges. Complete as per instruction

of architect & engineer in charge.

Supplying of First Aid Box Lockable Medicine Box with Detachable

8.00 Tray & Handle Medical Kit/ First Aid Kit (Home, Sports and Fitness, 3.00 Nos. 1515.00

Vehicle, Workplace) as directed by Engineer-in-charge.

Providing, Supplying of 20 Liter capacity Stainless Steel Dust Bin Material of

Stainless Steel Grade 304 Container wall (SS Sheet) thickness (in mm) 3, Type

9.00 of wall Non perforated, dust bin units suitable for Floors mount, Shape of 6.00 Nos. 920.11

round diretced by Engineer-in-charge.

Providing and fixing Fire Extinguishers, Hand appliances: Dry Chemical Powder

Cartridge type Fire Extinguisher of capacity 6 kg Confirms to IS 2171, bearing

ISI mark, complete with Brass forged cap and CO2 Gas Cartridge of 120 gm (IS

4947), fitted with 500 mm long hose, filled with Sodium Bi Carbonate based

Dry Powder (IS 4308), with wall mounting bracket

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING & ERECTION OF FURNITURE AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing Fire Extinguishers, Hand appliances: CO2 type Fire

11.00 Extinguisher of Capacity 4.5 KG capacity Confirms to IS 2878, bearing ISI mark, 3.00 Nos. 5605.50

complete with all accessories.

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF HIGH MAST LED LIGHT POLE AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Making trench in Hard Murrum / Tar Road of suitable width of

90 cms or required depth for laying any size of cable or locating

the fault all over the run and back filling the same and making

the surface as normal ground.

Supplying, erecting, testing, commissioning approved make M.S.

Polygonal High Mast Pole having following general Specification.

(a) Polygonal Section fabricated from M.S. Plate confirms BSEN

10025 & Hot deep galvanised minimum 65/86 micron (as per IS

01461) Lantern carriage with ring and rubber lines for erection

of luminaries of suitable site.

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorised winch with 6mm dia S.S.

Rod (For 16 mtr and above size)

(d) Approved make L.E.D. aviation light = 1 No. Lighting arrestor

= 1 No. with necessary wiring of 2.5 sq.mm 5 core ISI copper

cable Unarmoured.

(e) Bottom most section suitable for mounting reversible motor

2.00 and switchgears having door not more than 1400mm x 300mm 2.00 Nos. 141616.14

with waterproof gasket & hinges & locking arrangement.

(f) Pole structure comprises suitable size of reversible motor,

cable and necessary switchgears with control panel.

(g) bottom section shall have suitable size of thickness supports

ribs foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS including

testing & commissioning of the entire structure for following

size of High Mast poles

[1] High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM A/F 360mm,

No. of Sec. No. - 1, Bottom Thickness - 3 mm, Size of Base Plate -

Dia 520 mm x 20 mm thick, Foundation Bolt Size M24 x

mm, Qty - 6 Nos., Suitable for mounting Fitting of Light - 6 Nos.

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF HIGH MAST LED LIGHT POLE AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 1Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with company

mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD < 10 %, CCT

Uniformity ratio >0.45, Luminaire efficacy> 85 lumens/watt .

LED driver efficiency > 85 %.

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux

(U.S.A.) make LED used for luminaire. ( Each fittings required LM-

79 & LM-80 certificates)

(B) Flood Light (IP-65), Surge -4KV

(d) 100 to 120 watts

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 1Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with company

mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD < 10 %, CCT

Uniformity ratio >0.45, Luminaire efficacy> 85 lumens/watt .

LED driver efficiency > 85 %.

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux

(U.S.A.) make LED used for luminaire. ( Each fittings required LM-

79 & LM-80 certificates)

(B) Flood Light (IP-65), Surge -4KV

(d) 200 to 250 watts

Supplying and erecting Flexible PVC insulated multistrand

multicore 1.1 kv grade ISI marked copper wires of following size

to be erected as directed.

h) 2.50 Sq.mm 3 core round PVC sheathed

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

6.00 with necessary clamps or in existing trench / pipe of following 144.00 R.Mt. 220.18

(A-1) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF HIGH MAST LED LIGHT POLE AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate) &

7.00 having back filling compound of (B) Inner chemical (CCM 1.00 Each. 4591.46

Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary

test report must be submitted.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

8.00 with out going tails, insulating tape etc for following size of 5.00 Each. 75.75

(b) 3x1/2 core 35/50 Sq. mm

Cast iron earth plate size 30 X 30 X 0.35 cms. buried in specially

prepared 2.5 Mtr. deep earth pit complete with necessary G.I.

9.00 strip in G.I. pipe 2 Mtr. long with coupling and G.I. plug for 2.00 Each. 685.79

earthing of switch gear, conduit run or power plug etc.

ADD Extra for excavation in Hard rock by dry and wet blasting

and chiselling for funnel type earthing of above .

For using salt and charcoal / coke as required for pipe type

Providing and erecting HOT deep Galvanised iron strip wire 8 to

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF HIGH MAST LED LIGHT POLE AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs made

from jointless M.S. Angle with cable clamps to be buried in

ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cms high

bricks work finishing with plaster etc. hinged double door

internally supported on both side, with internal and outside

looking arrangement with look and keys in duplicate 35 x 35 x

mm M.S. Angle of Two Nos. one is welded and other with nut

and bolt for erecting bakelite sheet. Painting the Section Pillar

inside and out side with three tank powder coated paint.

section pillar roof should be without joint with water leakage

proof & tested as per IP 55 test & followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Guage MS

Sheet with angle iron legs 95 cms long made from 40 X 40 X

mm thick MS angle.

Supplying and erecting bakelite sheet 8mm thick HYLAM make

on existing angle iron frame.

Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V. having normal current

rating up to 125A. with Fixed thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all internal

connections & complete erected in existing 16 G.M.S. housing.

Supplying & erecting power contactor for time switch complete

16.00 erected as per direction Cat III 1.00 Nos. 2782.55

[D] 4 pole 440V 40 Amp.

Providing and erecting busbar chamber confirming to IS-375

fabricated from 16 G.M.S. sheet, dust & vermin proof having

hinged door with rubber gasket and necessary busbar supports

with COPPER busbar having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly wrapped

17.00 with colour insulation tape for phase sequence, three phase & 1.50 Rmt. 5731.75

neutral each suitable for following current capacity with

necessary painting mounted on wall or pedestal frame of

required size with necessary connections.

(B) Suitable for 200 Amp. capacity

Providing Approved make Triple Pole Metal Clad Switch Fuse

Unit 415/500 V. with HRC fuse of suitable load and neutral link

confirming to IS.

(a) 32 A Cat III

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF HIGH MAST LED LIGHT POLE AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and fixing Terminal board of size 5.0 x 127 x

mm.bakelite sheet with 15 Amp. kitkat pattern porcelain fuse

19.00 unit with suitable brass studs with nuts, washers and clamps of 1.00 Nos. 146.45

size 25mm x 3mm suitable for pole painted with one coat of red

Providing and erecting cable clamp of 25 mm X 3 mm M.S. flat

suitable for fixing 2 Nos.of armoured cable with nuts and bolts.

(c) for 140 mm dia. Pole

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground /

road surface for enclosing cable

(B)63mm outer dia

Pipe type earthing having 150 cms.long and 2.5 cms. dia.

galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire.

Supplying and erecting approved make Segment time switch

suitable for 230V+10%16A. floating contacts with 24 hour dial

having15/30 min. segments with early manual override

switching for on & off without influencing the program

23.00 sequence with quartz time switch With power reserve, housed 1.00 Nos. 2226.04

in fire proof thermoplastic enclosure & transparent cover

terminal covers erected as required wire necessary connection

erected as directed.

Solderless crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING AND ERECTION OF HIGH MAST LED LIGHT POLE AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Solderless crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CONSTRUCTION OF SPLIT AIR CONDITIONERS AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and erecting Inverter based approved make split air-conditioning

unit consisting of condensing unit with variable speed fan motor, inverter type

hermetically sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its accessories by

means of extra supplied proper insulated copper tubing,drain PVC pipes

suitable for ( cost includes Eco Friendly green gas charging and 15A plug top &

Remote Control & MS Stand) with necessary core cutting.

(2)For 4/5 Star Rating of current year

(B) for 1.5 ton capacity- Premium Cat.

Providing and erecting Inverter based approved make split air-conditioning

unit consisting of condensing unit with variable speed fan motor, inverter type

hermetically sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its accessories by

means of extra supplied proper insulated copper tubing,drain PVC pipes

suitable for ( cost includes Eco Friendly green gas charging and 15A plug top &

Remote Control & MS Stand) with necessary core cutting.

(2)For 4/5 Star Rating of current year

(C) for 1.7 to 2 ton capacity-Premium Cat.

Supplying & installing MS standard type stand mounting for outdoor unit of

3.00 Split A.C. upto 4 TR capacity erected with necessary hardware materials as 6.00 Nos 643.37

Supplying and erecting insulated pair of soft copper tubing open or concealed

4.00 including power and control cable,necessary PVC drain pipes for Split AC 18.00 R.Mt. 822.14

machine up to 4 TR capacity

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING, ERECTING, TESTING & COMMISSIONING OF DG SET AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Providing and erecting cable end terminatation kit, heat shrinkable Push

on type Densons/ Raychem/ Elastimold make as per EIC suitable for 11 KV

XLPE cable 3core 95 & 120 Sq.mm (A) Outdoor type

Providing and erecting cable end terminatation kit, heat shrinkable Push

on type Densons/ Raychem/ Elastimold make as per EIC suitable for 11 KV

XLPE cable 3core 95 & 120 Sq.mm (B) Indoor type

Supplying & erecting D.C.P. type fire extinguisher for following capacity

cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder

and brackets confirming to IS 2171 1985 and complete erected with

necessary clamps made from 50 x 6 mm M S Flat with nuts and bolts

grouted in wall complete. [A] For 5 Kg Capacity

Supplying & erecting D.C.P. type fire extinguisher for following capacity

cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder

and brackets confirming to IS 2171 1985 and complete erected with

necessary clamps made from 50 x 6 mm M S Flat with nuts and bolts

grouted in wall complete. [B] For 10 KG Capacity

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of

following capacity with necessary clamps made from 50 x 6 mm M.S. Flat

with nut & bolts grouted in wall complete. [A] For 4.5 Kg Capacity

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables (G) 3 1/2

core 150 Sq. mm ( 70 Sq. mm 1/2 core)

Making trench in soft soil of suitable width of 90 cms deep for laying

7.00 cable or locating the fault all over the run and backfilling the same and 120.00 R.Mt. 55.55

making the surface as normal ground.

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having

Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe

dia of 40 mm having 200-250 Micron galvanising, connection terminal dia

of 14 mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of

8.00 applications. [C] For Electrical Installation covering Transformer Neutrals, 1.00 Nos. 10593.89

Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA)i.e. independent Earthing located

in other than normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg

NADIAD MUNICIPAL CORPORATION - NADIAD

DISTRICT :- KHEDA

BID DOCUMENT FOR CONSTRUCTION WORK OF MUNICIPAL CORPORATION PARTY PLOT AND COMMUNITY HALL FOR NADIAD MUNICIPAL

CORPORATION, NADIAD.

SUPPLYING, ERECTING, TESTING & COMMISSIONING OF DG SET AT MUNICIPAL CORPORATION PARTY PLOT AT NADIAD.

SR.NO. ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Supplying and erecting, commissioning and testing of Diesel Generating

set confirming to IS: 4722:1968 & BS:5514 having continuous rating,

phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed

air/water cooled diesel engine with multi-cylinders developing suitable

BHP not less than following capacity at 1500 RPM with 10% overload for

one hour in 24 hours with standard accessories like fly wheel, lubricating

oil cooler, "A" class governor, heavy duty fuel wheel and lubricating oil

filter, oil bath air filler, lubricating oil pressure gauge, end exhaust

manifold, standard set of tools with adjustable spanners, screw drivers,

cylinder head to cover, joint cylinder head to exhaust, element lube oil

filter, 12 / 24 volts electric starting equipment complete with standard

heavy duty battery, dynamo, cut-outs, ammeter, necessary wiring,

pressure gauge, starter etc and heavy duty Residential type exhaust

silencer (With DEF System) and vertical hot air duct both logged with

asbestos rope, save oil trays, exhaust piping of required length, standard

wall/floor mounted fuel with level indicator and piping and drip proof

alternator, self excited, self regulated, screen protected, with excitation

system, capable of delivering the rated system output at 415 volts,

phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722-

1968 with voltage regulation +/- 5% of rated voltage from no load to

full load. Both the engine and alternator fitted on a common fabricated

9.00 steel base plate with antivibration mounting engine and alternator 1.00 Set 1029194.04

both connected to each other by flexible flange coupling and with

floor/wall mounted control panel box comprising of voltmeter ammeter,

selector switches, ACB / MCCB / MCB of adequate capacity, indicator

lamps duly wired with HRC fuses. The alternator & control panel shall be

connected with provided suitable capacity armoured cable and complete

with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet,

sound absorbing material Rockwool of 64 density & 100 mm thick

conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm. The

resin bonded rockwool covered from inside the canopy by perforated

sheet with 3/4 mm holes, sound level not more than 75 dB at a distance

of 1 mtr, as per PVCT norms.DG set should have in built fuel tank capacity

of minimum 8 hrs of continous running capacity on full load . Erection,

commissioning and satisfactory testing as per requirement with first

filling of fuel (minimum up to the 80% of fuel tank capacity), oil, etc. with

guarantee / Warrantee of complete system for Two years. & with

obtaining all necessary certificate from Electrical Inspector. The Capacity

and Ratings of DG sets are as below. (As per new CPCB4+ Emission norms

Engine With - Turbo Charger, EGR (Exhaust Gas Recirculation), CRS

(Common Rail Fuel System), DOC (Diesel Oxidation Catalyst), SCR

(Selective Catalytic Reduction), Integrated wiring harness connected to

ECU .) (M) Continuous rating of 125 KVA ,BHP not less than 154 BHP

TOTAL AMOUNT RS.:-

TOTAL AMOUNT RS.:-

SAY AMOUNT RS.:-

Consultanting Civil Engineer City Engineer

DD(OPC) PVT. LTD. Nadiad Municipal Corporation

Ahmedabad Nadiad