Repair/ replacement of Oil type starter / dry type starter, Air blower, Dozing systems, water level indicator and improvement of external water supply system under AGE E/M-I of GE Dehradun.

Amount

Material and labour for taking down from base fame disconnecting form coupling, air blower of any capacity, any make shifting to workshop for repair, opening carefully, dismantling and overhouling complete parts placing new packing sheets, cleaning of all parts by kerosine oil neatly, oiling and greasing all spare parts with and including replacement of defective spare parts (impeller, baffle, shaft, shaft seal, ball bearing coupling, inlet/outlet flange,oil and etc found at site) by new parts of the same make necessary welding machine / grinding work if required at the time of refitting of spare parts in blower resiftting and refixing on base plate and installed on existing PCC platform and test as with proper alginement with motor and testing on full discharge complete all as specified and directed by Engr-in-Charge.

Supply only stable bleaching powder Grade – I conforming to IS-1065/1989 (IInd Revision) as amended upto date having available chlorine contents minimum 34% by mass and packed in 25 Kg polythene bag having double fold complete all as specified and directed by Engineer-in-Charge and as per following specifications:- Make : Grasim/Shriram Bleaching powder (Calcium Hypo Chloride), Chlorine formula : Ca (OCl)2 Molecular weight : 142.96, Physical Appearance : white fine powder, Chlorine content :- 30 % ± 1%, Moisture : 0.5 % Max On heating at 10 ± 2°C it dose not lose more than 1/15 of available chlorine Passing through 1.7mm sieve : 99%

Supply only Alum Ferric Sulphate (Grade-4) (best quality as per sample) for purification of water (containing lead (as PB) 30 ppm max and arsenic 6ppm max) confirming to IS-299/2012 (Revised) as amended up-to-date complete all as specified and directed by Engineer-in-Charge. (Note:- The Alumino Ferric Sulphate shall be supplied in superior quality Bricks (Slabs) as per IS specifications.

Supply only lime of superior quality complete all as specified and directed.

Taking up or down PVC pipe from trenches including dismentling & removing for disposal of pipes 160 mm bore complete all as specified and directed.

Supply & fixing high density polyethylene pipe (HDPE) 160 mm bore of presure rarting PE 100 PN 10 as per IS 4984-2016 Black colour complete with all fittings required at site Note : (i) Cost of the all jointing material & fittings such as Tee, Bend, Socket etc are included in the cost of item rate.Make : Polytuf/supreme/Jindal/Jack pipes

Material and labour for site clearance by means removing of debris, cutting of grass, bushes, plant growth and disposed off up to a distance not more than 50mtr from the starting point all as directed at site at various water supply installations. Note:- This item shall be execute twice in six month at a particular site/location.

Supply and fix in repair tyre coupling guard made out of 3 mm thick MS sheet with one coat of primer and two coat of synthetic enamel paint suitable for 15 HP to 125 HP Pump set including necessary fixing arrangement, welding work complete all as specified and directed

Supply and laying lowering & jointing for submersible pump and centrifugal pumping set lead including jointing material PVC insulated and PVC sheathed submersible flat cable multistranded copper conductor 50 Sqmm 3 core, 1100 volt grade including Material and labour for cable tieing arragngement with two places at each length (3mtr) of column pipe including taking down old complete all as specified and as directed.

All as per item No. 09 here-in-before but 35 sqmm, 3 core complete all as specified and directed.

All as per item No. 09 here-in-before but 25 sqmm, 3 core complete all as specified and directed.

All as per item No. 09 here-in-before but 16 sqmm, 3 core complete all as specified and directed.

All as per item No. 09 here-in-before but 10 sqmm, 3 core complete all as specified and directed.

Material and labour for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base floors complete all as specified.

Material and labour for dismantling electrically and taking down unserviceable fully automatic starter ATS type/Oil merged starter 15HP to 50HP , from base frame and check the neutral and earthing connections properly , check the all nut bolts tightining. After replacement the defective parts, refixing the same and re connect all the incoming/outgoing cables properly including testing and commissioning complete all as specified and as directed by Engr- in- Charge.(Note: Spare parts required for replacement shall be measured & paid for separately under respective item).transporting to workshop for repair

All as per item No. 15 here-in-before but for the 60.0 HP to 100.0 HP capacity complete all as specified and directed. (Note: Spare parts required for replacement shall be measured & paid for separately under respective item).

Supply only following spares of fully automatic starter as per items No 15 & 16 :-

Fixed power copper contacts suitable for 60 HP to 75 HP star delta starter.

Moving power copper contacts suitable for 60 HP to 75 HP star delta starter.

Fixed power copper contacts suitable for 15 HP to 50 HP star delta starter.

Moving power copper contacts suitable for 15 HP to 50 HP star delta starter.

ON-OFF switch suitable for 60/80 HP for star delta starter.

Transformer complete suitable for 60 HP to 75 HP star delta starter.

Material and labour for new dehydrated Transformer oil for replacement of old transformer oil (make- poweroil,Servo,Electrol)

Material and labour in Replacement of heavy duty sluice gate (MS type Self contained sluice gate) of size 2450mm x 2150mm with rectangular opeing, furnished with standard flangeback or extended flangeback frames. All units feature adjustable corrosion -resistant side wedges and seat facing locked in dovetail grooves. All mating or sliding surfaces are fully machined including close tolerance tongue and groove guides. All assembly hardware shall be of corrosion - resistant material, contractor is responsible for taking down old gate and fixing new sluice gate as per site requirement ( ref structer new sluice gate as per Appx 'A' attached) Note:- providing of neccerary T&P is the responsiblity of the contractor .The Sluice gate containing assembly parts i,e Stem cover , Gate operator, Top wall mounting bracket, Stem, Stem guide, Stem coupling, Top wdge, Cover guide rail, Thrust nut, Side wedge, Frame, Cover, Bottom wedge etc of sutable size complete all as specified and directed by Engineer-in-charge.

Material and labour for 15mm thick rendering on brick surfaces/upper surface/side surface of semi under ground water storage sump of any capacity or on any other as directed by Engr-in-Charge, in cement mortar 1:6 and finished the surface even and smooth without using extra cement complete all as specified and directed.

Dismantling of plastering / concrete on upper surface of semi underground water storage sump laid bedded and pointed in any mortar of any description of thickness in floors, apron etc. complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600mm x6.0mm thick buried directly in ground ( earth pit not less than 2.25 mtr below normal ground level ) with top edge plate not less than 1.5 metre below normal ground level connected to galvanized earth strip of size 25x4mm as earthing lead by means of bolts, nuts, chuck nuts and washers of galvanized iron earth lead including PCC pit in PCC 1:2:4 type B-1, RCC cover made out of cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with TMT steel bars 8 mm dia @150 mm c/c both ways with suitable handle and angle iron 40x40x5mm frame, GI medium grade watering pipe 20mm bore and funnel with wire mesh light grade protection pipe 40mm bore up to main board complete as shown on electrical plate No 3 of MES Sch 2009 (Part-I) and testing on completion all as directed. Note: (i) On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction of Engineer-in-charge. (ii) More than 7 meter length of earth strip will be measured separately under relevant item

Material and labour for Pumping out water from the RIMC swimming pool of size 50x21M, Diving Pool 16x16 and 6 M deep, Lime tank and Balancing tank (fresh water inflow tank), Bleaching tank etc by using pumpset, removing the sediments and mud, algae and cleaning the walls, floors, ducts, channels, surface of glazed tiles, painted and cemented surfaces by using scrappers, brushes, and other mechanical equipments, washing the surfaces with clean water and applying Hydrochloric acid and other detergents and drying in open complete all as directed by Engineer-in-charge. Note: The tenderers are advised to visit the site to know the exact condition of the swimming pool before quoting the rate. Rate of HCL and other cleaning agent is included in the quoted rate of the item

Material and labour for Pumping out water from the Garhwal swimming pool of size 25x10M including Diving Pool , Lime tank and Balancing tank (fresh water inflow tank), Bleaching tank etc by using pumpset, removing the sediments and mud, algae and cleaning the walls, floors, ducts, channels, surface of glazed tiles, painted and cemented surfaces by using scrappers, brushes, and other mechanical equipments, washing the surfaces with clean water and applying Hydrochloric acid and other detergents and drying in open complete all as directed by Engineer-in-charge. Note: The tenderers are advised to visit the site to know the exact condition of the swimming pool before quoting the rate. Rate of HCL and other cleaning agent is included in the quoted rate of the item

Material and labour water proofing treatement of OHT / under ground sump/semi underground sump by fixing of 10mm dia aqua TP/Dr fixit/SBR/Fosroc grouting upto 75 mm depth by drilling with 12mm bore hole & fixing in cement mortar at 600mm c/c with grouting Dr Miracle/Dr fixit/SBR/Fosroc @ 4.1 kg/Sqm average grout preapered by mixing Dr Miracle powder with Dr Miracle Part 'B' with 5% Aqua bond/Dr fixit/SBR/Fosroc bonding agent by grouting pump @ 10 to 12 kg/Sqcm pressure on positive side and @ 3 to 4kg/sqcm on negative side including removal of nipple and making fair & fine by using two coats of Aqua Bond and Dr Miracle Part 2 powder/Dr fixit/SBR/Fosroc & 4 Kg/Sqm ( 1.5 kg Aqua bond : 2.5 Kg Dr Miracle part) with polymer modified concrete with chikenwire mesh after cleaning of water tank with wire brush/washing complete all as directed. Note :- (i) Contractor will responsible for taking out water from OHT/Under ground /Semi ground sump for repair the same. (ii) Contractor will be responsible for providing of all T&P required for this work without any extra cost. (iii) After completion this job contractor will responsible for testing the repaired OHT/UG Sump and Semi underground sump for further working of the same.

Supplying, lowering, installation, testing and commissioning for submersible pump set suitable for 250/200mm casing pipe, water lubricated and cooled complete with stream line non return valve directly coupled pump set with and including required submersible motor suitable on 415 Volt, 3 phase, 50Hz AC. The pump set shall be capable to deliver 46 Mtr3 /Hr at 120 Mtr Head. The pump and the motor shall be of same make complete all as specified and directed. Note :- Discharge case shall be fitted with suitable adopter of 100mm nominal bore 0.6mtr length threaded at one end and flanged at other end to match with column pipe duly fitted with 2 Nos. flat iron supports. The adopter shall be welded to GI pipe outlet and studded with discharge case. (For Birpur site)

Material and labour for repair of sluice valve of 100 mm to 200 mm size and shifting to workshop for repair and opening dismantling and greasing complete parts, all parts cleaned by Kerosene oil neatly with and including replacement of defective spare parts by news parts including necessary welding machine/ grinding work if required at the time of refitting of spare into sluice valve and refixing on existing water pipe line and testing on full discharge complete all as specified and directed.Note:- (i) Spare parts which are required to be replaced during repair shall be measured and paid separately in after as supply only rates,however fixing element shall be deemed to be included in the quoted rates of this item.

Supply only following spares parts to be replaced as repair to sluice valve under item No 26 here-in-before :-

Gland suitable for 100mm to 200 mm sluice valve

Packing suitable for 100mm to 200 mm sluice valve

Bonnet suitable for 100mm to 200 mm sluice valve

Stem suitable for 100mm to 200 mm sluice valve

Thrust plate suitable for 100mm to 200 mm sluice valve

Gasket suitable for 100mm to 200 mm sluice valve

Material and labour for repair of sluice valve of 250mm to 300mm size and shifting to workshop for repair and opening dismantling and greasing complete parts, all parts cleaned by Kerosene oil neatly with and including replacement of defective spare parts by news parts including necessary welding machine/ grinding work if required at the time of refitting of spare into sluice valve and refixing on existing water pipe line and testing on full discharge complete all as specified and directed.Note:- (i) Spare parts which are required to be replaced during repair shall be measured and paid separately in after as supply only rates,however fixing element shall be deemed to be included in the quoted rates of this item.

Supply only following spares parts to be replaced as repair to sluice valve under item No 27 here-in-before:-

Gland suitable for 250mm to 300 mm sluice valve

Packing suitable for 250mm to 300 mm sluice valve

Bonnet suitable for 250mm to 300mm sluice valve

Stem suitable for 250mm to 300mm mm sluice valve

Thrust plate suitable for 250mm to 300mm sluice valve

Gasket suitable for 250mm to 300mm mm sluice valve

Material and labour for sand filling under floors orin foundation including spreading & levelling complete all as specified and directed.

Supply and fixing CI air release valve with single air outlets flanged ends as per conforming to IS 14845 complete with Nuts/Bolts and washers and rubber packing etc for the following sizes and taking down the old unserviceable:- Make : Kirloskar/SANT/Kartar

200 mm bore

150 mm bore

100 mm bore

80 mm bore.

Supply and fixing CI sluice valve both end flanged duly drilled for both ends with stainless steel spindle (Non rising spindle)and nuts stuffing box etc type PN - 1.6, ISI marked of following sizes and taking down the old unserviceable and deposit to MES store yard:-

300mm bore

250mm bore

200 mm bore

150 mm bore

100 mm bore

80 mm bore.

Material and labour for water sample testing every three month for any of the sources as directed by Engr -in-Charge by collecting sample of raw and treated water in clean sealed container in presence of representative of GE and same shall be got tested for physical, Biological and chemical test for potability of water as per relevant IS, once in every three months from a Govt recognized lab and Test result of water shall be submitted to AGE E&M office for record.( Location- New Bijapur,Patia P/H,Anarwala P/H,Birpur Filter plant ,Bicher Road P/H,Lal Gate P/H,Polo P/House- total 07 Location)

Disconnecting and taking down unserviceable dozing system of any capacity from existing electric and water connection and shifting to workshop or at site for repair and after repair connect all electrical connections / pipe connections should be connect properly, reassembling resifting & reinstallation at site inclduing testing complete all as specifed & directed. Note:- (i) Spare parts which are required to be replaced during repair shall be measured and paid separately in after as supply only rates,however fixing element shall be deemed to be included in the quoted rates of this item.(ii)Contractor shall ensure water pipe lines sealed by blocking with dead flange for the repair period if required.

Supply only following spares parts to be replaced as repair to dozing system under item No 32 here in before:-

Complete gear motor 230v, having 10 Kg pressure, 50Hz and rotor assembly with bearings brackets & tolerance ring suitable for dozing system at site.

Injection check valve 3/8"

Weighte suction line strainer tubing

Check valve /NRV

Connecting nut and ferrule

Feeding pipe line complete all fitting

Dosing Pump

Supply and fix Mini motor Protection relay complete protections for Thermal overload, Earth fault, Locked rotor, single phasing, current unbalance, phase sequence reversal and under current. Make L&T

Supply only alum crystal

FAB MEDIA as per sample for STP Make Ion exchange/Thermax

Supply only bacteria culture, suitable for MBBR type for STP

Supply only DAP fertiliser for day to day use in sewage treatment plant complete all as specified and directed

Supply only molasses (Sheera) for day to day use in sewage treatment plant complete all as specified and directed.

Supply only HCL for cleaning of RIMC & Garhwal swimming pool.

Disconnecting the existing non functional submersible pump set from electric supply from panel, dismantling existing CI bend from non return valve, removing and lifting out submersible pump set of any description and capacity & in any position, alongwith existing column pipe 100mm dia and existing submersible cable of any size from the bore well ( up to 450 feet depth of pump set from GL) and staking the pump and column pipes near by the bore well for inspection complete all as specified and directed by Engineer-in-Charge. NOTE : (i) Contractor shall take proper precautions while lifting out and removing pump set from bore well so as to avoid any damage to column pipe and submersible cable. All necessary T&P and equipments required for lifting out pump set etc shall be arranged by the contractor at his own cost. (ii) Number of column pipe may vary from 30 to 40. The existing pipeSupply and fix langed joints shall be checked for its serviceability & unserviceable joints alongwith flanges shall be removed from the column pipe by cutting the pipes & making new thread in pipes for fixing of new flange joint, the cost of same shall be deemed to be included in the quoted rate for above item. However cleaning of pipes shall be measured & paid separately.

Dismantling and strip opening of submersible pump & motor of any description and in any position for servicing /overhauling mechanically and electrically, cleaning, oiling/greasing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts, welding , etc of broken steel sections of pump, full stator slot repair including rotor sleeve grinding and polishing and balancing (if required), reassembling the Pump & motor, ensuring proper alignment of pump and motor, connecting to existing system and testing at site on full load to the entire satisfaction of the Engineer-in-Charge for 40 to 75 HP capacity, 3 phase, 415 volts, 50 HZ, AC supply pumps & motors.Note: - (i) The replacement of defective / nonfunctional parts shall be measured & paid for separately as “Supply only” under appropriate item of Sch ‘A’ and fixing rate for new items are deemed to include under these items. (ii) Burnt out windings of motor shall be replaced, measured and paid for separately under appropriate item of Sch ‘A’ for rewinding. (iii) Painting of complete submersible pump motor set will be carried out by contractor after complete repair of the same and the cost of the painting work will be included in quoted rate of this item. (iii) The rates for above items are deemed to include transportation to & fro of pumps/ motors to workshop for necessary repairs. (iv) The rate quoted for the item shall include re-metaling of Pump shaft, polishing and grinding and making standard size to match with Bush/Neck-ring/ sleeve etc (v) Lifting of pump and motor from bore well and lowering of pump and motor after repairs shall be measured and paid separately under appropriate item of Schedule `A' (vi) The quoted rate shall be deemed to include replacement of small/ minor parts i.e. washers, keys for coupling, cable packing ring etc.

Supply only the following items / spare parts suitable for submersible pump set of 40 to 52 HP capacity dismantled under Sch ‘A’ item No.42.00 here-in-before all as specified and directed by the Engineer-in-Charge.

GM bush bearing.

Neoprene rubber bush for stage bowl.

Stain less steel sleeve.

S/S stud with nut for stage bowl

Impeller Key

GM impeller

Motor pump coupling made out of stain less steel with key.

Stage bowl

Anti magnetic stainless steel pump shaft with key

Strainer stainless steel

Supply only the following items / spare parts suitable for submersible pump set of 60 to 75 HP capacity dismantled under Sch ‘A’ item No. 42.00 here-in-before all as specified and directed by the Engineer-in-Charge.

GM bush bearing.

Neoprene rubber bush for stage bowl.

Stain less steel sleeve.

S/S stud with nut for stage bowl

Impeller Key

GM impeller

Motor pump coupling made out of stain less steel with key.

Stage bowl

Anti magnetic stainless steel pump shaft with key Make :- DD/ KSB or equivalent approved

Strainer stainless steel

Supply only the following items / spare parts suitable for Motor of submersible of 40 to 52 HP capacity dismantled under Sch ‘A’ item No. 42.00 here-in-before all as specified and directed by the Engineer-in-Charge.

S/S upper sleeve.

S/S lower bush.

Upper bush rubber.

Lower bush rubber.

GM thrust bearing.

GM thrust plate complete kit

Thrust plate accel

Supply only the following items / spare parts suitable for Motor of submersible of 60 to 75 HP capacity dismantled under Sch ‘A’ item No. 42.00 here-in-before all as specified and directed by the Engineer-in-Charge.

S/S upper sleeve.

S/S lower bush.

Upper bush rubber.

Lower bush rubber.

GM thrust bearing.

GM thrust plate complete kit

Thrust plate accel

Taking out & removing old burnt out windings of the submersible electric motors of following capacity and rewinding of submersible electric motors with existing size PVC insulated, copper conductor wire as approved by the Engineer-in-Charge including cleaning the slots with carbon- tetra-chloride solution before rewinding ,transportation to site complete all as specified and directed by Engineer-in-Charge.

40 HP to 60 HP, Three phase, 415 Volts, 50 Hz, AC supply

61 HP to 75 HP, Three phase, 415 Volts, 50 Hz, AC supply

Lowering down of the submersible pump set of any description and any capacity & in any position, in bore well alongwith column pipe 100mm dia and submersible cable of any size (approximately 450 feet depth of pump set from GL) making necessary electric connections & testing the pump set after lowering for 04 hrs contineuous running complete all as specified and directed by Engineer-in-Charge

Supply and fixing straight through joint complete with jointing materials suitable for three core stranded copper conductor cable PVC insulated and sheathed flat submersible cable 1100 Volt grade all as specified and directed by Engineer-in-Charge.(Make - 3M / Denson/Raychem )

Servicing of servo voltage stablizer of capacity 50 KVA to 150 KVA installed at water supply installation by disconnecting of all electrical connections of stabilizer and check the auto/manual function of stabilizer, to be check the oil level, oil seals leakage if any, check all volt meters and amp meter working condition or not, Taking out defective partas for replacement and clean entilrly by air blower, check the neutral and earthing connections properly , check the all nut bolts tightining. After replacement the defective parts, refixing the same and re connect all the incoming/outgoing cables properly including testing and commissioning complete all as specified and as directed by Engr- in- Charge. Note:- (i) Spares parts if required shall be measured & paid separately as ‘supply only’ under relevant items. (ii) Labour charge for ‘supply only’ materials are deemed to be included in the quoted rate.

Supply only electronic servo card complete all as specified and directed.

Supply only Ampere meter with C.T (Digital/analog) including necessary connection controlling switches complete (suitable size of shape) complete all as specified and directed.

Supply only voltmeter 0 to 440 volts flush type including necessary connection controlling switches complete (suitable size of shape) complete all as specified and directed.

Supply only Servo motor 10 K.G. torque single phase complete all as specified and directed.

Supply only Rotary switch 60/100 Amp for R. Y. B phase complete all as specified and directed.

Supply only trigger transformer complete all as specified and directed.

Supply only Port meter complete all as specified and directed.

Supply only Auto manual switch complete all as specified and directed.

Supply only P.C.B Holder complete all as specified and directed.

Supply only Contractor strip complete all as specified and directed.

Supply only Indicator light complete all as specified and directed.

Supply only of dimmer coil 60 amp rewinding complete all as specified and directed.

Supply only of Main Transformer 50 KVA complete all as specified and directed.

Supply bearing grease in 5 kg suppliers packing complete all as specified and directed. Make : Castrol/SKF

Material and labour for repair of Water Level Monitor Device devloped on latest Technology of Make : SECO and make functional in all respect and recharge 2 Nos SIM card for 11 months (01 No SIM card in transmitt unit and 01 No SIM card in reciever unit).Note:- (i) Spare parts which are required to be replaced during repair shall be measured and paid separately in after as supply only rates,however fixing element shall be deemed to be included in the quoted rates of this item.

Supply only following spares parts to be replaced as repair to water level indicator under item No 52 here in before:-

Float valve (30 inch length and 100mm dia) alonwith rope (SS plastic coated) suitable for existing water level indicator

LED Display suitable for existing water level indicator

Cooling fan suitable for existing water level indicator

Sensor unit suitable for existing water level indicator

PCB suitable for existing water level indicator

Transformer 0f 12/8 Amp cap suitable for

Supply only Calcium Hypo Chlorite having 65%-70% Chlorine Content (Calcium based granular disinfectant) for general water treatment & swimming pool water treatment, in factory sealed container/drum (45 kg packing), complete all as specified and directed. Make : Royalseema/ Declibac Calcium Hypochlorite detailed specifications : (a) Chemical analysis & physical observations : Description : Whitish granules Granular size (Mesh passing through - 100 BSS): 1.1(+ 0.1)% Water/moisture : < 5.00% Mercury & other Heavy Metal contaminants : BDL. (b) Strength in terms of quantity of chlorination chemical required to obtain free chlorine of 1 ppm per lakh liters of water: Requirement must be 140-200 gm per one lakh liter of water to achieve 1 ppm Average at injection point (site & raw water quality variations may apply additionally).

Material and labour for providing of MS pipe line (overflow pipe line ) of the 150mm bore including CI sluice valve upto 150 mm dia and other all CI / DI fittings and jointing materials and joint the same with existing water supply pipe line complete all as specified and directed. Note :- Rate of all items i,e any type of joint (flanged /socketed/tyton rubber ring /D joint etc),welding or lead joint including all type of required fittings such as socket,Tee,union ,tell peice, bend by cutting /threading /welding as required a site shall be included in quoted rate to this item. any required length of MS pipe line shall not less then 06 RM at site) deemed to be included in quoted rate.

Cutting of cast iron pipe mains 150 mm bore for insertion of tees, collars, sluice valves, etc including dewatering work required for working water pipe lines complete all as specified and directed.

Material and labour for CI fitting / DI fittings for spigot & socket end pipes such as Bends (any type, radius and angle), Tapers any type (Straight, bend, increasing, decreasing or double socket etc), Tee pieces single branch, `Y` junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs and mechanical joints any type etc upto 150 mm bore including removing/ dismantling of old CI fittings complete all as specified and directed.

Supply only copper tube (Thimbles) terminal heavy duty of size 25 Sqmm complete all as specified and directed.

Supply only copper tube (Thimbles) terminal heavy duty of size 35 Sqmm complete all as specified and directed.

Supply only copper tube (Thimbles) terminal heavy duty of size 50 Sqmm complete all as specified and directed.

Supply only copper tube (Thimbles) terminal heavy duty of size 70 Sqmm complete all as specified and directed.

Supply only copper tube (Thimbles) terminal heavy duty of size 95 Sqmm complete all as specified and directed.

Supply only greased graphite gland packing of size 10 mm as required at site complete all as specified & directed. Make :- Champion

Supply only greased graphite gland packing of size 12 mm as required at site complete all as specified & directed. Make :- Champion

Rajender Electricals

M/s Kamal Traders