PROVIDING AND FIXING LED STREET LIGHTS IN VARIOUS 03 LOCATIONS (SHREE BAI SOCIETY AREA, NARSHIA TEKRI AREA AND VIRPUR TALALA ROAD TO GSCSCL GODOWN) AT TALALA DIST. GIR SOMNATH (2nd Attempt)

NAME OF WORK: - PROVIDING AND FIXING LED STREET LIGHT IN VARIOUS 03 LOCATIONS (SHREE

BAI SOCIETY AREA, NARSHIA TEKRI AREA AND VIRPUR TALALA ROAD TO GSCSCL GODOWN) AT

TALALA DIST. GIR SOMNATH UNDER SJMMSVY 2025-26 SCHEME (2nd Attempt)

SR. NO. DISCRIPTION AMOUNT

SCHEDULE PROVIDING AND FIXING LED STREET LIGHT IN VARIOUS 03 LOCATIONS

B-1 (SHREE BAI SOCIETY AREA , NARSHIA TEKRI AREA AND VIRPUR TALALA

ROAD TO GSCSCL GODOWN ) AT TALALA DIST. GIR SOMNATH UNDER

SJMMSVY 2025-26 SCHEME

I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount

mentioned above.

Tendered amount put to tender Rs. 21,89,149.00 Tendered amount put to tender Rs.

Deduct. % below Rs. Add.: % Above Rs.

Net Rs. Net Rs.

In words In words

President Chief Officer

Signature of Contractor. Talala Nagarpalika Talala Nagarpalika

TALALA NAGARPALIKA -TALALA

NAME OF WORK :- ESTIMATE FOR LED STREET LIGHT IN VARIOUS 03 LOCATIONS

(SHREE BAI SOCIETY AREA , NARSHIA TEKRI AREA AND VIRPUR TALALA ROAD TO

GSCSCL GODOWN ) AT TALALA DIST. GIR SOMNATH UNDER SJMMSVY 2025-26 SCHEME

Description Qty Unit Rate Amount

Mains with 1.1 KV Grade FRPVC insulated ISI marked standard

copper conductor wire in existing pipe erected with 1.5 sq.mm.

Copper conductor FR PVC insulated standard wire of green colour

for earth continuity of following size. c) 3 wire 1.5 sq.mm. 504.00 Mtr 62.62

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminium housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V, Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity

2 ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings. The Engineer in charge may select any

wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and, Light

must have 440VAC line supply with over-voltage protection. (i)

above 36 to 48 watts

Cat-lll 84.00 Ea. 3345.12

Providing and erecting Miniature circuit breaker single pole 0.5A

3 to 2A system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark - Cat-III 84.00 Ea. 270.68

Providing & erecting 415V MCB Four Pole Switch for Lighting

Load (B curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity (a) 6 to 32 A.

Cat - III 1.00 Ea. 578.73

Approved make ELCBs / RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity

of 6 KA and suitable for operation on 3 phase and neutral 415V.

5 Having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. Rating erected as directed. (ii) 40 Amps. FP cat -

Pipe type earthing having 150 cms. Long and 2.5 cms. Dia.

6 Galvanised iron pipe with coupling and bunch burried in specially

prepared earth pit complete with necessary 8 SWG earth wire. 84.00 Ea. 368.65

7 for using salt and charcoal/coke as required for pipe type earthing 84.00 Ea. 171.70

Providing and erecting XLPE (IS: 7098) (I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables (B) 4 core 6 Sq. mm 1350.00 Mtr 126.25

Making trench in soft soil of suitable width of 90 cms deep for

9 laying cable or locating the fault all over the run and backfilling

the same and making the surface as normal ground. 1260.00 Mtr 55.55

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene (conforming to IS 14930 II) with

necessary connecting accessories of same material at required

depth for laying of cable. Below ground / road surface for

enclosing cable and back filling the same to make ground as per

original. (A) 50 mm dia 1344.00 Mtr 62.62

Solderless crimping type aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

11 pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (A) 1.5/2.5

Supply of approved make GRP / FRP Pole having following

specifications: GRP Light Pole made by CNC filament winding

machine using thermoset resin polyester/epoxy resin system)

having minimum 62% glass content. The pole should be in one

piece and tapered round in shape, having smooth finish and should

be totally free from corrosion as well as nonconductive & shock

proof Pole should be provided with FRP Anchor Base and it

should be heavy duty, or MS Material duly painted with Epoxy

paint. Pole should be flame retardant as per IS 6746. Resin used

shall be UV resistance and pigmented.

A highly weather resistant polyurethane coating shall be applied to

the pole after applying suitable primer system that ensures proper

adhesion of the paint. Minimum coating thickness shall be 80 to

100 micron. Deflection of the pole shall not exceed more than

10% of the length of pole for the given load“? Pole should be

generally made as per the dimensional data, performance criteria

and some interchangeability features of poles as per standard

ANSI C 136.20 latest version or ASTM D 4923/01 . The size of

pole and type of installation are as below .

(1) Suitable for base plate mounting single arm Bracket.

[H] Overall length of 6 Mtr. Average Thickness: 7.5mm Top/

Bottom OD Dia A/F 89mm ± 2mm approx. approx. Weight of

Pole 32 kg approx. (Without Base) Anchor Base (Size 300X300 &

Providing FRP arm bracket of having 2 sets of suitable SS304

hardware for fixing the brackets & spread of 1.2 Mtr(Suitable for

89 to 114 mm pole top dia)

(a) Single arm bracket 84.00 Ea. 2551.26

Providing M-20 / 1:2:4 cement concrete foundation & 70 % PCC

from bottom including excavation for the pole of size 45 x 45 x

100 cms. Deep in below ground level with plinth of 45 cms x

cms (or 45 cms dia x 45 cms) high upper ground level with

necessary curing and finishing in approved manner. (for 4 & 6 Mtr

Supplying & erecting MINI SECTION PILLAR 75 x 60 x 45 cms

fabricated from 16 Gauge thick joint legs M.S. Sheet with angle

iron legs 45 cms long made from 35 x 35 x 5 mm thick. Joint less

M.S. Angle with cable clamps to be buried in ground to have

15 appropriate erection to work Uniform Until erected with cement

concrete foundation and 45 cms high bricks work finishing with

plaster etc. hinged double door with 3" x 4" vision panel covered

with Mesh & V. panel overlapping with flap for meter reading

internally supported on both side, with internal and outside 1.00 Ea. 3595.60

looking arrangement with look and keys in duplicate 35 x 35 x

mm M.S. Angle of Two Nos. one is welded and other with nut and

bolt for erecting Bakelite sheet. Painting the Section Pillar inside

and out side with three tank powder coated paint.. Section pillar

roof should be without joint with water leakage proof & tested as

per IP 55 test & followed by IS 2147 of

(B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS

Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle.

Supplying and erecting Bakelite sheet 12mm thick HYLAM make

on existing angle iron frame. 2.00 sq.mtr. 2311.89

Supplying & erecting approved make time switch with single pole

air break contacts suitable for 230 V.15/16A.complete with self-

17 starting motor driven clock ‘ON’ &’ OFF’ automatic arrangement

at any predetermined time during each 24 hours, With nickel

cadmium rechargeable battery backup erected as directed. 1.00 Ea. 2354.31

Supplying & erecting power contactor for time switch complete

18 erected as per direction Cat III [D] 4 Pole 440 V 40 Amps.

/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered

amount mentioned above.

Tendered amount put to tender Rs. 21,89,149.00 Tendered amount put to tender Rs.

Deduct. % below Rs. Add.: % Above Rs.

President Chief Officer

Signature of Contractor. Talala Nagarpalika Talala Nagarpalika