Ulundurpet Municipality - 15th CFC Un Tied - Repair Work at WD-14 OHT

Amount

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of wallsBrick / Stone Masonry in cement mortar walls under 3m highetc., complete complying with standard specification (SQR 24-25 PWD -W-0015 of Page.No:-27)

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

R.C.C.Jolly by a new of following size in M20 Concrete using 20mm gauge hard broken granite stone jelly and river sand excluding cost of reinforcement but includingcharges,fabrication charges curing neat finishing and labour charges for fixing the jolly in position with standard spefication

Providing two legged scaffolding using 15cm diameter blue-gum props or casurina props or best quality bamboo props of 4m overall length (3m height + 0.5m. in to the ground +0,5m projection) the distance between the two rows being 1.25m, and the spacing of props being 2m, in both the rows with two horizontal props with 0.5m overlap on either side and braces at 2m, c/c including longitudinal and transverse middle braces to step up and Providing a platform with country wood planks of 40mm, thick and lm width, etc., in a complete form using coir and nails - 1m. Run.

Plastering with cement mortar 1:5 (One part of Cement and Three part of Plastering Sand (P- Sand)) 12mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Wiring with2x1.5sq.mm PVCinsulated SC unsheathed FRLS copper conductor of 1100V gradeinsuitablePVCrigidpipe concealed in wall and ceiling with PVCaccessories influshwith wall with 3mm thick hylum sheet cover with TW switch box and 5AFT switch with continuous earth wire connection of 1.5sq.mm copper wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) (SD-23) (Electrical Data 24-25)

Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15 A 3 pin non inter locking Wall socket with 15A Flush type switch with continuous earth wire connection of 14 SWG TC wire , and making good of the concealed portion, with suitable colour for concealed power plug point (SD 38) (2024-2025)

Supply & Fixing of 20W LED Tube Light for T8 Fitting (Single Side) all accessoreis including cost of an LED light with accessories and fitting charges etc., complete.(SQR -24-25) Page -168 (SI.No:-15 M-1278)

Goods and Service Tax @ 18%

VSV CONSTRUCTIONS (BID ID -1302468)