Special repair to roof sheets in bldg No-T-70,T-75,T-76 and T-77 of UK Sub Area, Provn of path for Bldg No T-59,T-60 (MNS single Accn), washing area for dhobi at Punjab and addn and altn to bldg No-P-27A Mortury at MH under AGE B R-I of GE Dehradun.

Amount

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings n. exc. 15 cm thickness(below or above ground level) complete all as specified and directed.

Surface excavation/dressing not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in soft/loose of soil for foundation, etc. or for shafts, wells, cesspits, manholes, pierholes, cable etc. and getting out complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.50 cum, getting out soil & removing to a distance n exc 50 meter and making good surface in any type of soil complete all as specified.

Returning, filling in soil including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete as in sub base floor complete all as specified and directed.

M&L for PCC 1:2:4 type B- 1 (using 20 mm graded stone aggregate) as in cills, steps, coping, benching etc including necessary weathering, slightly rounded or chamfered angles and throating ,form work and demolition of existing concrete etc complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and directed.

M&L for Cement concrete 1:3:6 Type C2 (using 40 mm graded stone aggregate) in surface channels and drains incl moulds if reqd ,complete all as specified

M&L for broken stone hard core of gauge n. exc. 63mm deposited, spread and levelled in layer n. exc. 15cm thick watered and rammed to a true surface complete all as specified and directed

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor , finished even and fair,complete all as specified and directed.

M & L for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with spacers 3mm , set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6, incl demolition of existing tile complete all as specified.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness , M- 35 grade, set, jointed and pointed in neat cement slurry in floors with grey cement & pigments complete all as directed .

M & L for Filleting in any position and to any shape in cement mortar 1:4 includingall mitres, stops, etc.complete all as spfd and directed.

M&L for brick work with sub class 'B' bricks (old size), straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) complete all as specified and directed (using old size bricks).

M&L for rendering 15mm thick in cement mortar 1:4 on walls (fair / unfair finished faces of brick/concrete), finished even and smooth without using extra cement complete all as specified. (Water proofing compound where ever ordered shall be added and the same will be measured and paid separately)

M&L machine cut kota stone slab 20 to 25 mm thick as in flooring , step etc over and including 15mm thick CM 1:6 screed bed , laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing, rounding of edges & polishing complete all as specified

M&L for machine cut Kota stone slab 20 to 25 mm thick, as on vertical surfaces such as riser of steps, skirting, dado etc. over & including 10mm thick rendering (bedding layer) in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, rounding of edges and polishing complete all as specified.

M & L for 25 mm thick Cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floor base complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggreate), 75 mm thick as in plinth protection, finishing the surface even & fair without using extra cement the plinth protection shall be laid in alternate bays n exe 2 Sqm, 10mm joints shall be provided, joints shall be filled with bitumen mastic, bitumen mastic comprise of 1 Part of Hot bitumen 85/25 grade and 3 parts of sand all by weight complete all as specified & directed.

Supply only liquid water proofing compound Dr. Fixit / Fosroc complete all as specified and directed.

S&F mild steel framed work for such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 complete all as specified & directed.

M&L mild steel plain black sheet 1.60 mm in wall cladding steel gates and similar work cut to size, holes, punched .including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joint complete all as specified and directed

M&L applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer including preparation of new steel or iron surfaces of any description exc 10 cm width or girth, complete all as specified and directed.

M&L for two coats of oil bound distemper on old painted surfaces of walls etc including preparation of surfaces complete all as specified and directed.

M&L for two coats of cement base paint on old painted surfaces of walls etc including preparation of surfaces complete all as specified and directed.

Dismantling of walls/ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs / blankets, any thickness including cover fillets etc, complete all as specified and directed.

S& F 4 mm thick 'E' board in false ceiling including & fixing of frame work made of special section MS sheet glavanised with zine coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of E boad with ceiling section & perimeter of angle 25x25x0.50 mm thick all a specified, and directed ..

S&F powder coated aluminium anodised door with frame and shutter, and glazing 5.0 mm thick tined glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary including taking down complete all as specified and directed. section of aluminium door shall be of following sizes: - Top;- 85x44.5x1.20 mm thick fixed with rawal plug,width;- 85x44.5x1.20 mm thick Bottom;- 112x44.5x1.20 mm thick,Style;- 85x44.5x1.20 mm thick Glazing beading;- 0.70 mm thick,Aluminium handle 'D' type ;- 150mm Aluminium tower bold 9.9 mm dia shoot 200 mm long Mortice lock- 100 mm 4 lever,Aluminium stopper cleat,aluminium hinges 100 mm long Note;- Making good of wall surface with matching to existing surface complete included in quoted rate.

S&F powder coated aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick retro reflected glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips of following sizes;- Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thick Bottuom section;-112x44.5x1.22 mm thick Complete all as specified and directed

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 20cm girth in Brick/ RCC complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section in any position ,framed / unframed work complete all as specified and directed.

M&L Pre-painted galvanlume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strangth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old AC sheets etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of old AC sheets etc complete all as specified and directed.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250) quality A complete all as specified and directed.

S&F 8 mm thick Plates (plain or chequred ) ,channels, squares cut or notched (ordinary and counter sunk forming holes, without any attachment conf to Fe-210 (Gde-E-165) complete all as specified and directed

S&F structural steel work in tubular trusses ,posts/poles, including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1998 grade ST -240 quality - A complete all as specified

S&F structural steel work as in roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. Structural steel conforming to Fe-410W, Grade-E 250, Quality 'A' complete all as specified.

M&L for cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or PCC 1:2:4 type B-1, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but not exc. one brick complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or weldedcomplete all as specified & directed.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or weldedcomplete all as specified & directed.

S&F steel windows/ ventilators, fixed type with glazing bars, dovetailed or welded complete all as specified & directed.

M&L for 4.8 mm thick plain sheet glass ordinary quality in windows n. exceeding 0.5 sqm in each pane with stainlesss steel complete all as specified and directed.

M&L for form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work fair finished surface complete all as specified and directed.

M&L for reinforced cement concrete 1;2:4 type B-1 (using 20 mm graded stone aggregate) as in foundation, footing, plinth beams, bases for column etc, complete all as specified and directed.

S&F mild steel TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as specified .

S&f TMT bars 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified.

M & L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC surface conduit not less than 19 mm dia, clip, complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including MS Box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly for One light / fan point controlled by one switch , complete all as specified and directed. Note: The wiring to be done as per IE rule and maintain colour code accordingly

All as per Item No 52 mentioned here-in- before but One three pin 5 Amp socket on same board with other switches.

All as per Item No 52 mentioned here-in- before but One three pin 5 Amp socket on independent board.

All as per Item No 52 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 1.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in existing PVC / Steel, concealed conduits and existing MS boxes, mounting of switches, sockets, fan regulator etc with new 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly for One light / fan point controlled by one switch , complete all as specified and directed. compete all as specified and directed by Eng.-in-charge of following Note: The wiring to be done as per IE rule and maintain colour code accordingly

All as per Item No 56 mentioned here-in- before butOne three pin 5 Amp socket on same board with other switches.

All as per Item No 56 mentioned here-in- before butOne three pin 5 Amp socket on independent board.

All as per Item No 56 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 1.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

S&F switch piano flush type single pole, 5 Amps, one way all as per specified & directed.

S&F switch piano flush type single pole, 16 Amps, one way all as per specified & directed.

S&F socket outlet 6 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F socket outlet multipurpose 5 and 15 Amps, 5 pin, 2 in 1 complete all as specified & directed.

S&F ceiling rose surface bakelite 3 terminals of size 65x25mm. complete all as specified & directed.

S&F lamp holder PVC/polycarbonate type with black plate angularfor batten, complete all as specified & directed.

S&F step type, electronic fan regulator 120 watts, 5 step for ceiling fan 1200/1400 mm sweep 230 volts AC, double module complete all as specified.

S&F in replacement 18/20 W LED tube light fitting's batten type in single phase with lamp 6500/ 4000 K complete with pre-wired and accessories complete all as specified and directed.

S&F in replacement LED light fitting 1x10 watt bulk head LED type luminaries and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified & directed.

S&F in replacement building security light fitting LED type luminaries with surge protector and photo voltaic/ LDR sensor controlled made out of single piece die cast aluminium housing suitable for and including 30 Watt LED lamp type ,pre wired including bracket made out of 32 mm dia med grade GI pipeas reqd shape with nuts,bolts & washers of min 1.2 m length incl grouting or fastners and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified & directed.

Supply and fix in replacement LED recessed mounted 2'x 2 feet, 36 Watt and higher wattage in CRCA poeder coated box type light fitting with polycarbonate diffuser CCT> 5700 K,CRI > 80,PF>95 2 complete all as specified and directed.

S&F MCB single pole 240 volt 10 KA 6 to 32 Amp, B curve conforming to relevant IS complete all as specified & directed.

S&F MCB SPN 240 Volt 10 KA 40 to 63 Amp conforming to IS complete all as specified.

S & F in replacement 900 mm long down rod for ceiling fans ,made from 15 mm bore med grade GI tubing including drilling holes, cutting of slot etc complete all as specified.

M&L in replacement sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 6 Sqmm as current carrying conductor and one run of 4 Sqmm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into and including concealed PVC non metallic rigid conduit medium grade complete all as specified. Note:- Two runs of wire , one run of earth wire and one run of conduit shall be measured as one meter only for payment purpose.

M&L for CPRI approved chemical earthing complete with galvanised iron pipe electrode 50 mm dia, 2 mtr long with terminal size 50x6 mm burried directly in ground not less than 2.25 m deep below normal ground connected with and including galvanised wire 4mm dia earth lead upto DB by means of nut and bolts,check nuts,washers etc duly protected by GI pipe15 mm bore ,light grade incl PVC accesses well and cover and gel type back fill compound ,necessary earth work in any type of soil,incl testing on completion, complete all as specified and as directed.

Supply & fix ceiling fan 1200mm sweep, 230 Volts AC single phase, 50 Hz 3 blades, double ball bearing, energy saving complete with and including three core flexible PVC insulated multi stranded copper conductor cable of size 0.5 sqmm from ceiling rose to connector, including extra GI/MS pipe down rod, as per site requirement complete all as specified and directed.

Supply & fix Double ball bearing motor, heavy duty exhaust fans, rust proof body dynamically balanced blades for vibration free & noiseless operation, AC single phase, 6 pole 55 Watts or higher wattage, 900 RPM, 230/ 240 V of size 230 mm sweep with louver & 3 core white flexible multistranded copper conductor 23/0.0076 from ceiling rose to fan connector complete all as specified and directed

S&F wall mounted LED tube light fitting 1x20 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make :- Havells/Philips/Wipro.

Supply & fixing security light fitting LED type 25 Watt of die-cast IP 66 aluminium housing, LED 6000K lenses type and toughened glass having separate surge protector 10 KV, efficiency of minimum 100 lumens/watt, incl adaptor (if any) required to fix with existing bracket of min 40 mm dia complete with all accessories all as directed incl taking down existing fitting complete. Make :- Havells/Philips/Wipro.

S&F flood light fittings. Energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing IP66 flood light with high power LED's as light sources, suitable for high lighting architectural features or retail spaces as 60 watt or higher size LED , Glass cover complete all as specified and directed.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) drawing in and including 20 mm dia or higher medium duty PVC concealed conduit/flexible conduit where reqd and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sqmm as earth wire upto common earth and connected to earth dolly complete. Note:- Two runs of wire , one run of earth wire and one run of conduit shall be measured as one meter only for payment purpose.

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 40 mm dia for cable protection complete all as specified and directed.

Supply & Laying XLPE insulated armoured heavy duty electric cable , with multi stranded aluminium conductor served with an inner sheathing of PVC type armoured with galvanized steel wire or tape and PVC sheathed 1100 volt grade,nominal cross sectional area 10 Sqmm 2 core including lugs and heat shrinkable PVC Sleeves on exposed surfaces & teflon tape duly insulated complete laid in trenches, ducts, drawn through pipe across the road/path/alongpoles/wall/floors/equipment etc including jointing and testing complete all as specified.

Sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified and directed.

M&L for brick well burnt Class ‘B’ as cover to U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches complete all as specified and directed by Engineer-in-Charge.

Supply and fix Sheet metal enclosure SPN with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 10 KA C series complete all as specrified & directed.

Supply and fixing in replacement for Distribution board SPN 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process.

Supply and fixing in replacement for Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process.

S&Fix in repairs MCB SPN 240 Volt 10 KA 25 to 40 Amp 'C' series complete all as specified.

S&Fix in repairs MCB single pole 240 volt, 10 KA, 5-32 Amp, 'C' series complete all as specified.

SRI GANESH ENTERPRISES

PAWAN KUMAR

M/S JAI PRAKASH GOEL

Arun Construction Co.