CONSTTRUCTION OF TUBE WELL IN KUMMI AREA_ 5531409

Amount

Excavation in foundation,trenches (for pipes & pits) up to all depths in all classification of earth work such as pick work, jumper work,saturated soil including bailing and pumping out water, blasting soft/hard rock or chiseling soft/hard rock where blasting is prohibited in all lifts including trimming & dressing of sides, levelling of beds to correct grade i/c shoring/ strutting,planking, timbering & dewatering wherever required, stacking the useable of unuseable material/ soil separately & after excavated soil clear from the edge of excavation returning the excavated soil after laying jointing testing of pipes in trenches in 15 Cm layers including consolidating of each deposited layer by ramming & watering & then disposing of all surplus Excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic,night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- charge.

Providing & Fixing Chambers of MS Sheet 2mm thick with angle iron frame 25x25x3mm having lockng arrangement complete with iternal size of 0.45x0.45x.60 mtr. etc. complete in all respects with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- charge.

Providing , laying , jointing and testing of HDPE pipes in trenches to required grades as per IS: 4984-1995 latest with up to date amendments of following OD pipes, material grade and class of pipes including all fittings like end caps, collars & cut pieces etc. complete in all respects. The jointing of pipes should be done by way of butt fusion welding as per relevant IS Code and specifications complete job in all respect as per the directions and satisfaction of Engineer-in-charge.

140mm outer dia, material grade PE-80, pressure rating PN-4KG/ cm2

125mm outer dia, material grade PE-80, pressure rating PN-4KG/ cm2

110mm outer dia, material grade PE-80, pressure rating PN-4KG/ cm2

90mm outer dia, material grade PE-80, pressure rating PN-4KG/ cm2

Providing and fixing of 63mm dia hydrant with G.I Riser pipe (IS:1239-1990) of 65 mm dia, PP valve 63mm dia, GI elbow & Nipple with coupler etc. of 65mm dia, plain concrete grouting for GI TEE, connecting Riser pipe with sub-main complete set of fiitings as per site requirements complete job in all respect, with in all leads and lifts, as per the direction and satisfaction of Engineer-in-charge.

Providing and fixing cast iron sluice valve of Leader/Kirloskar/ Kilburn/Linecon/Pelicon or reputed make (BS 1414) class ASA-150 with flange Table-17 with Nut & Bolts and Gasket including complete process of opening of existing valve and fixing new valve by all means complete job in all respect within all leads and lifts as per the direction and best satisfaction of Engineer In Charge.

150mm dia

125mm dia

100mm dia

80mm dia

JITENDER KUMAR

KUSHAL SINGH RAGHAV