REPAIRS AND RECANNING OF CHAIRS AND OTHER STEEL FURNITURE INCL PAINTING TO OTM MD ACCN OF OL HL BARODA

Amount

NOTE: (i) for Replacement, the Size and shape of components of furniture shall be all as per Drg, Specified & directed. (ii) For wooden components replaced shall be 2-3 coats french polished & existing unreplaced components also polished with one coat to match full article furniture & For steel components replaced shall be two coat of syntheic enamel paint over red oxide primer & existing unreplaced components painted with one coat synthetic enamel paint to match full article furniture.. (iii) The article of furniture shall be stacked inside godown neatly after complete repairs. (iv) Teakwood shall be Ist class well seasoned (v) The rate shall be quoted under respective items accordingly. Almirah Med Steel FD-1032 : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete.

Handles Stainless Steel

Locking device

Leg duly painted.

Shutter of 1.0mm thick MS duly painted with two coat of synthetic enamil paint OG/Grey over a coat of redoxide

M&L for preperation of old surface of almirah steel & puttying where required and apply one coat of synthetic enamel OG/Gray paint including welding where required.

Almirah Large Steel (FD-67(M), FD-1031, FD-1033, FD/E6/MAP/18 : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete.

Shelves made out of 1mm thick MS sheet bent to shape & cut to size duly painted.

Legs made out of 1.00mm thick MS sheet bent to shape & cut to size duly painted.

Locking device three way made out of 10mm MS bar round and 3mm MS plate.

Handle with bush to almirah large steel.

Lock to almirah large steel.

Cleats made out of 2mm thick sheet bent to shape, fixed with nut & bolt to give support to shelves duly painted.

Coat of synthetic enamal paint OG/Smoke Gray to internal / external surface & shelves completely strictly through spray gun machine after preparation of old painted surface by filling with putty, cleaning with sand paper and applying primer where required to Almirah Large Steel.

Repairs to Locker bed side steel (FD-1029) : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete.

Socket for hanging CP rod 20mm dia

Hasp & staple of 75mm x 40mm x 3mm

Shutter of Locker Bed side steel duly painted.

Shelves of locker bed side steel duly painted.

Legs of locker bed side steel of U shape chennel 10mm height & 60mm wide ends plugged with 1mm thick mild steel sheet duly welded at both duly painted.

CP pipe 20mm dia CP steel conduit pipe of 1.6mm thickness

M&L for preperation of old surfaces of locker bed side steel & puttying where required and apply one coat of synthetic enamel OG/Gray paint including welding where required.

Table 3' x 2' Steel without Drawer (FD-1007) : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete

Top made out of Particle Board Prelaminated both side18mm thick exterior grade (ISI Marked) PVC beading fixed all around the top of same colour.

M&L for prepration of old painted surface by filling with putty, cleaning with sand paper & apply fine coat of sythetic enamal paint OG strictly with spray gun machine.

Table 3' x 2' Steel with Drawer (FD-1008) : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete

Top made out of Particle Board Prelaminated both side 18mm thick exterior grade (ISI Marked) PVC beading fixed all around the top of same colour.

Drawer made out of 1mm thick MS Sheet bent to shape & cut to size.

M&L for prepration of old painted surface by filling with putty, cleaning with sand paper & apply fine coat of sythetic enamal paint OG strictly with spray gun machine.

Table 3' x 3' Steel (FD-1009) : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete

Top made out of Particle Board Prelaminated both side 18mm thick exterior grade (ISI Marked) PVC beading fixed all around the top of same colour.

M&L for prepration of old painted surface by filling with putty, cleaning with sand paper & apply fine coat of sythetic enamal paint OG strictly with spray gun machine.

Chair Writing (FD/E6/MAP/12) : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete

Side Arms (PU Material) fixed to chair writing.

Factory made Cushion seat made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round.

Factory made Cushion Back with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all around.

Chair Verandah steel FD 256 : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete.

Leg frame of size 20mm dia 16 gauge of MS conduit pipe fixed with run welding & duly painted and hard rubber shoe.

Plastic cane weaving 2mm wide border 3.5/4mm wide round side border cane of approval qty after applying one coat of synthetic enamel white paint complete. make of cane: Ajay / MPI / Shah / Garware

Hard rubber shoe.

Table Bed Side MAP(FD-E6/MAP/15® : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete.

Side of table with Particle Board Prelaminated both side 18mm thick exterior grade (ISI Marked) with hot pressed beading.

Top of table made out of particle Board Prelaminated both side 18mm thick exterior grade (ISI Marked) with hot pressed beading.

Upper drawer of Table made out of Particle Board Prelaminated both side 18mm thick exterior grade (ISI) Marked duly fixed with hot pressed beading.

Lower Drawer of Table made out of Particle Board Prelaminated both side 18mm thick duly fixed with hot pressed beading, rest all as shown in drg and as directed.

Back side of Table made out of 12mm thick Ply Wood BWR Grade (ISI Marker).

MS Tube frame of Table made out of 18 x 18 mm, 18 Gauge MS Square Pipe duly painted.

Stainless Steel handle for Table Bed Side MAP.

Teapoy Varandah (FD/E6/MAP/17 & FD-255, FD-383) : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete.

Top made out of Particle Board Prelaminated both side 18mm thick exterior grade (ISI marker) and PVC hot pressed beading all around the top of same color.

One coat of synthetic enamal paint Black / White to Teapoy Varandah after preparation of old painted surface by filling with putty, cleaning with sand paper and applying primer where required.

Table Computer (FD/E6/MAP/03) : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete.

Top made out of 18mm thick prelaminated particle board exterior grade (ISI Marked) one side teak face & other side white with hot pressed PVC beading.

Key Board Tray (450 x 480mm) fitted with telescopic channel.

Pull out Drawer fitted with telescopic channel.

Side Purline

Bottom/middle shelf

Chair CBA Special with hand rest (FD-260 /FD/E6/MAP/05) : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete.

Factory made Seat made out of 2nd class hard wood teak (Well seasoned) duly french polished including cane work 2mm plastic cane half rounded and 3.5/4 mm for perimeter work godrej pattern.

Facory made Back rest made out of 2nd class hard wood teak (Well seasoned) duly french polished including cane work 2mm plastic cane half rounded and 3.5/4mm for perimeter work godrej pattern.

M&L for removing of unserviceable broken arms from existing Chair CBA Special Steel with hand rest and S&F new arms made out of 1st class hard wood teak (Well seasoned) Duly french polished fix with screw steel all as specified and directed.

Hand Rest made out of 1st class hard wood plank in one piece teak (Well seasoned) duly french polished fix with screw steel.

M&L for for one cot of synthetic enamal paint OG to Chair CBA Special with hand rest Steel after preparation of old painted surfaces by filling with putty, cleaning with sand paper.

Chair CBA Steel with Arms (FD-75(M)) : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete.

Flat iron 25 x 3mm of required length welded with seat of chair CBA steel with arms complete.

Factory made Seat made out of 2nd class hard wood teak (Well seasoned) duly black stove polished includng cane work 2mm plastic cane half rounded and 3.5/4mm for perimeter work godrej pattren.

Factory made Back rest made out of 2nd class hard wood teak (Well seasoned) duly black stove polished includng cane work 2mm plastic cane half rounded and 3.5/4mm for perimeter work godrej pattren.

Arm rest made out of 1st class hard wood teak (Well seasoned) duly black stove polished.

M&L for one coat of synthetic enamal paint olive green to Chair CBA steel with arms after preparation of old painted surface by filling with putty, cleaning with sand paper.

Table office Clerk Steel (FD-84(M) & FD-1004) : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete.

Top made out of Particle Board Prelaminated 18mm thick (ISI Marked) with hot pressed PVC beading all around the top of same colour.

Drawers made out 1mm thick MS Sheet bend to shape & cut to shape duly painted.

Lock to Table

M&L for fine coat of synthetic enamal paint OG/Smoke Gray strictly with spray gun machine to all steel surface after prepration of old painted surfaces by filling with putty, cleaning with sand paper.

Chair Computer (FD/E6/MAP/01) : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete.

Side arms (PU Material) fixed to chair Computer.

Factory made Cushion seat made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round.

Factory made Cushion Back made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all around.

Base assembly to chair computer.

Hydraulic assembly to chair Computer.

Caster wheel.

Table Office Officer Steel (FD54(M) & FD-1003) : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete

Top made out of particle Board Prelaminated both side 18mm Thick (ISI Marked) with hot pressed PVC beading all around of same colour.

Drawers made out 1mm thick MS Sheet bend to shape & cut to size.

Shutter of side unit made out 1 mm thick MS Sheet bend to shape & cut to size.

Lock for existing table office clerk steel.

M&L for fine coat of synthetic enamal paint OG/Smoke Gray strictly with spray gun machine to all steel surface after prepration of old painted surfaces by filling with putty, cleaning with sand paper.

Charpoy GI Pipe ply top (FD-220) : Dismantling / removing the following UNSV components and S&F new components / Parts as specified complete.

Tightening / refitting of frame by removing plywood top from charpoy GI with all fittings complete.

Plytop of 12mm fit to size including 6mm dia 65mm long bolt round headed, with nut and washer maximum 10 Nos per charpoy.

Stiffener of size 25mm square conduit pipe of 1.6mm thick welded at equal distance of GI charpoy frame and applying two coats of synthetic enamel black paint over a coat of red oxide primer to conduit pipe.

GI elbow (32mm dia) ISI marked three way medium grade.

GI checknut 32mm dia medium grade.

32mm dia medium grade long rail including cutting, threading for GI Charpoy (Note: Long Rails are screwed fully in the angle elbow)

Short rails for GI Charpoys 32mm dia made out of from broken long rails obtained from srl item No. 17.06 above including cutting & threading rails and fixing. (Note: Short Rails are screwed fully in the angle elbow)

Legs for GI Charpoys 32mm dia made out from broken short rails obtained from Srl item No. 17.07 above including cutting, threading and fixing and providing of 5mm thick MS Plate of dia 50mm at bottom of legs by welding duly painted with two coat of synthetic enamel black paint. (Note: Legs are screwed fully in the angle elbow)

M&L for preparation of old Painted surface of steel furniture by removing dirt, spots, dots etc filling putty where required and painting with synthetic enamel paint as required shade of paint shall be as directed for the following items of furniture Note: All Painting work shall be done with spray machine.

Almirah Med Steel FD-1032

Almirah Large Steel (FD-67(M), FD-1031, FD-1033, FD/E6/MAP/18

Locker Bed Side Steel FD-1029

Table Office Officer Steel (FD54(M) & FD-1003)

Table office Clerk Steel (FD-84(M) & FD-1004)

Table Steel without drawer 900 x 600 x 760mm (FD-1007)

Table Steel with drawer 900 x 600 x 760mm (FD-1008)

Table Steel 900 x 900 x 760mm (FD-1009)

Teapoy Varandah (FD/E6/MAP/17 & FD-255, FD-383)

Rack Shoe Steel (FD/E6/MAP-II/02 ®)

Bed Hard Steel MAP (FD/E6/MAP/08 ®)

Stool Steel (FD-81(M)

Side Rack with 3/4 Tray Steel (FD-1023)

Book Case steel (FD-1028)

shreekalyanwoodworks

M/S Badri Electicals