C/O Toilet Block ITI Chowk in Ward No.13

Amount

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres. in Pick work as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for in situ-reinforced concrete & plain concrete work in:vertical surfaces and breaks in floors and walls for any thickness as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for in situ-reinforced concrete & plain concrete work in:flat surface such as soffitts of suspended floors,floors,roofs, landing and the like as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for in situ-reinforced concrete & plain concrete work inedges of slabs and breaks in floors and walls:under 20cm wide as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Providing and laying cementconcrete 1:4:8 (1 cement : 4 sand :8 graded stone aggregate 40mm nominal size) excluding cost of centring and shuttering in: Foundations and plinth: as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Brick work using machine made buiding bricks laid with forming horizontal and vertical grooves 10mm wide 12mm deep during laying in super-structure above plinth level upto floor two level in: as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Half brick masonry in common burnt clay building bricks in :-Cement Mortar 1:4 (1 cement:4 sand) Second Class Bricks as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Half brick masonry in common burnt clay building bricks in :-Cement Mortar 1:5 (1Cement:5 Sand). as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

6mm Cement plaster to ceiling ) In Cement mortar 1:3(1 Cement:3 Sand) as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge / panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge.For doors windows and ventilatiors and glazed partitions frames as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge / panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge.For doors windows and ventilatiors and glazed partitions frames.ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and lazing/ panelling shall be paid for separately) as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floors and cover plates etc. complete as per the direction of Engineer-In-Charge I/c making good the floors as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)Glazing with glass panes of 5.50mm thickness (weight not less than 13.75 kg/ sqm as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Providing and laying cement concrete work 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and contilever upto floor two level as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level :Tor Steel : as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx 10 mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Aplying one coat of AcrylicWashable emulsion Spectrum quartz king or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat i/c necessary putty to give smooth even surface, sand papered smooth complete as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F white viterous China Sqatting plate Urinal with internal rim Longitudinal flush pipe as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/f to wall ceiling and floor galvanized mild steel tubes and clamps i/c making good the wall,ceiling and floor complete in all respect as per approved brand jindal/Tata/Surya Parkash as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F cast iron floor traps of self cleaning design 100mm nominal size as per BIS specification as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F viterous china waste closet sqautting pan(India type WCPan) size 580mm Orissa Pattern of approved brand as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F viterous China wash down water closet (European Type W.C. Pan) with intergal P or S trap jointing the trap i/c jointing the trap with soil pipe in cement mortar 1:1 (1cement:Sand) seat over to be measured and paid for separetly as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F china 10ltr/12.50/15 ltr viterous china low level cistern with pair of CI or MS brackets complete and fitting such as lead valve less syphon 15mm nominal size brass ball valve with polythene float CP brass handle,unions and coupling for connections with inlet, outlet and overflow same and connections the flush bend with cistern and cllosed overflow pipe to be measured and paid for separetly complete in all respect of approved brand cera/jaquar/hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F automatic flushing cistern with pair of CI or ms bracket complete with fittings i/c Syphonic apparatus mosquito proof lid CP brass unions coupling for connection with inlet outlet and over flow pipes complete 5ltr capacity of approved brand cera/jaquar/hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F cp brass flush pipe for urinals with fitting such as unions clamps 32mm nominal bore of approved brand cera/jaquar/hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F viterous china wash basin with single hole for pillar tap with CI or MS brackets painted white i/c cutting holes & making good the same but excluding fitting, flat back 550*400mm complete in all respect of approved cera/jaquar/hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F viterous china pedestal for wash basin cubic ecessed at the back for repair of pipes and fitting of approved brand cera/jaquar/hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F CP brass waste for wash basin 32mm of approved brand cera/ jaquar/hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F rubber plug for wash basin 32mm nominl approved brand cera/jaquar/hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F MI union for wash basin 32mm approved brand cera/jaquar/ hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F 32mm lead waste pipes for wash basin unions approved brand cera/jaquar/hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F 600*450 mm bevellededge mirror of superior glass mounted as 6mm GI sheet with CP brasss screen washer of approved brand cera/jaquar/hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F towel toilet paper holder CP brass of approved brand cera/jaquar/ hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F division plate for urinals 600*300mm viterous of approved brand cera/jaquar/hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F CP brass bib tap with capstan head 15mm dia of approved brand cera/jaquar/hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F CP brass pillar tap with capstan head 15mm dia of approved brand cera/jaquar/hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F CP brass stop cock 15mm dia of approved brand cera/jaquar/ hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F CP brass brass angle valve15mm dia of approved brand cera/ jaquar/hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F pVC connection pipe with brass union 15mm dia of approved brand cera/jaquar/hindware /parryware as per BIC spec./HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F white glazed fire clay stall urinal with automatic sensor based flushing cistern i/c union clamps CI trap with out let gratings and others completed in all respect and as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

P/F MS sheet tank welded areound complete with 40mm nominal bore galvanized MS tube with fitting 25mm nominal bore MS ovr flow tube with fitting 1010 lt of approved quality as per HPPWD spec. as per drawing & HPPWD technical specification all leads and lifts and carriage of material as directed by the Engineer-in-charge

anuj gupta