PROVISION OF DEFICIENT MARRIED ACCN TYPE IV SPECIAL AND TYPE V FOR ICGS OKHA UNDER GE I CG PORBANDAR

Amount

SCHEDULE "A" Part - I (BUILDING WORKS) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-II ( EARTH WORK AND SITE CLEARENCE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-III (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (ROAD/PATH/CULVERT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-X SOLAR WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XI (CONDUIT FOR TELEPHONE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XII (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

INTERNAL WATER SUPPLY S&F Angular stop cock 20 mm dia, quarter turn Make - Jaquar Model No CQT-23053 or equivalent in Crab Tree/Kohler brand.

S&F Angular stop cock 15 mm dia, quarter turn Make - Jaquar Model No CQT-23053 or equivalent in Crab Tree/Kohler brand.

S&F Sink cock with swinging casted round shape spout (Wall mounted model) 20 mm dia, quarter turn Make - Jaquar Model No CQT-23347 or equivalent in Crab Tree/Kohler brand.

S&F two way bib cock 15 mm dia. Make - Jaquar Model No CQT-23041 or equivalent in Crab Tree/Kohler brand.

S&F Wall mixer with provision for overhead shower connection with 115mm long bend pipe on upper side, connecting leggs & Wall flanges. Make - Jaquar Model No CQT-23273UPR or equivalent in Crab Tree/Kohler brand.

INTERNAL ELECTRIC SUPPLY S & F 20 W surface/wall mounted LED batten, extruded aluminium housing with PC diffuser and integrated electronic driver with high efficiency long life LED chips, CRI ≥ 80, power factor ≥ 0.95, system luminous efficacy > 100, operating voltage 140- 270, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the LED batten fitting complete all as specified and directed. Make :- Bajaj BLTRU 20 W WH VIVA / Philips BN308C- LED- 20 S-6500 / OSRAM LUXPOWER BATTEN 19WL 840

S & F 20 W surface/wall mounted LED Decorative light , extruded aluminium housing with PC diffuser and integrated electronic driver with high efficiency long life LED chips, CRI ≥ 80, power factor ≥ 0.95, system luminous efficacy > 100, operating voltage 140- 270, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the LED batten fitting complete all as specified and directed.make bajaj FLEXITRON LED/ PHILIPS (Endura LED)

S & F 10 W surface/wall mounted LED batten tubelight, including LED tube/module, with PC diffuser and extruded aluminium anodised housing with LEDs as light source having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.98, CCT 6500K, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the LED batten fitting complete all as specified and directed. [Make: BAJAJ 112407 BCLSB 10 WH /Wipro Trim LEDNEO.

S & F 20 W LED security light having pressure die-cast housing with toughned glass and individual LEDs with secondary optics and IP 65 protection, including necessary electrical connections to security light fittings with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed. [Make:BAJAJ BCLST 20W LED I Philips BRP 022/ wipro (skyline).

“ S&F 12 W surface mounting round LED downlighter with dome shape opal diffuser suitable for indoor application all as specified and directed. Make : Bajaj BGCML-12W/ WIPRO (IRIS LED SLIM)

S & F BEE five star rated high-speed ceiling fan, conforming to IS 374- 1979, having 1200 mm blade sweep, speed not less than 370 RPM, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a downroad of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. [Make: Crompton EMPOWER 50/ USHA ENERGIA 32/ HAVELLS ES -50 PREMIUM

S & F engery efficient non-metalic fresh air fan having blade sweep 250 mm, speed not greater than 1760 RPM, air delivery not less than 800 Cum/Hr, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. [Make: CROMPTON VENTILUS / USHA CRISPAIR/ ORIENT Ventilator-DX

S & F engery efficient Exhaust fan having blade sweep 250 mm, speed not greater than 1400 RPM, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. [Make: CROMPTON VENTILUS or equivalent]

S & F ISI marked MCB having breaking capacity Icn = 10 kA, conforming to IS/IEC 60898-1-2002 complete all as specified and directed. [Make: Hager/Legrand/ Seimens/ Schneider

6 A, 230 V, 50 Hz SP MCB C- curve

16 A, 230 V, 50 Hz SP MCB C- curve

20 A, 230 V, 50 Hz SP MCB C- curve

20 A, 230 V, 50 Hz SPN MCB C- curve

63 A,415 V, 50 Hz SP MCB C- curve

M & L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised strip of size 32 mm x 6 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 40 mm diameter, connected to earthing test point, all as shown in electrical .plate No. 3 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. as all specified and directed.

SEWAGE DISPOSAL Construction of RCC Septic tanks with upflow filter designed to carry sewage and sullage water, exc in any type of soil, foundation in PCC 1:4:8 below foundation, RCC M:30, Design Mix in walls, Base slab, Baffle walls and Roof slab including Beams etc with vent shaft, Manhole openings with cover connection etc, complete with effective depth of 1.5 mtr and overall depth of 3.0 mtr for 100 Users all as shown on TD drg.

Construction of Soakage well of size 2.40m dia and 3.0m effective depth complete all as shown on TD drg.

EXTERNAL WATER SUPPLY Supply, laying and jointing in trenches DI pipes class K7 of standard length spigot and socketed end push type joint with rubber gasket as jointing material, internal cement mortar coating and external surface with bituminious paint of size 100 mm dia ISI all as spd and directed.

“M&L for ductile iron fitting such as bend collars, connecting pieces, tees, collars, elbows etc, suitable for up to 150 mm dia DI pipe including cement motor lining inside complete all as specified and directed”

Supply, installation and testing of CI sluice valves 100 mm dia flanged end class - I PN 1.0 as per IS 14846 heavy duty with stainless steel spindle and iron wheel at the top flanged end incl two Nos of flange joint incl jointing materials ie bolts and nuts all as directed. Make:L&T/Kirloskar/Zoloto/Kesin

M&L for valve reflux with by pass arrangement supplied and installed complete of size 80 mm dia bore.Make:Zoloto/Leader/Venus/L&T

M & L for construction of valve chambers size 1050 x 750 x 1000 mm depth with PCC foundation in the ratio 1:4:8 brick work cement mortor in the ratio 1:4 , plastering 15 mm thick inth ratio of 1:4 incl MS sheet cover 3 mm thick with angle iron frame 25 x 25 x 4 mm locking arrangement complete with painting on steel surfaces with one coat of redoxide paint over two coats of synthaetic paint all as spd and directed. Note : Excavation , Retuning , filling is included in the item

Supply installtion and testing AIR relese valve with single air outlet confirming to IS 14846 PN 1.0 of size 50 mm dia bore heavy duty with stain less steel spindel and and fixing up in DI water mains of size 100 mm dia bore

M & L for LT panel Board cubical KIOSK Indoor type compact 415 Volts AC 50 Hz, 4 wire +E, fabricated from Polycarbonate, Nominal Size 900mm X600mmX 660mm, RAL 7035 finish confirming to IP 54 complete including Copper bus bar 100 Amps, 4 strip mounted on porcelain insulated & enclosed in chamber, bottom cable entry comprising of following: (a) Incoming MCCB 63 Amps 4 pole with microprocessor based release having breaking capacity 36 KA.....01 Nos. (b) Outgoing MCB 63 Amps 415 V, Four Pole, 36KA---02 Nos. (c) Outgoing Star Delta starter 10 HP … 02 Nos (d) Digital Voltmeter 0-500 V 96x96xm …. 01 No (e) Digital Ammeter 0 - 500 A 96x96m …. 01 No (f) Indicating lamps set RYB …. 01 set. (g) Panel mounted type digital multifunctional energy meter, CT operated, LT 3 phase, 4 wire, including ct ratio 200/5---01 Nos (h) cubical space for star delta starter.

S&F Bail plug 200mm bore all as specified and directed.

S&F well cap 200mm size threaded and similar to housing pipe all as specified and directed.

S&F 2 Nos MS flat iron 100mmx10mm thick size clamp for holding with 300mm bore housing pipe including casting of PCC block of size 1200mmx1000mmx1000mm in PCC (1:2:4) type B-1 using 20mm graded stone aggregate including 150mm bore MS pipe 2 No. each, 1.5 metre long with cap plug and cap top for feeding pea gravel for each bore well as specified and directed.

Supply only strata sample box with glass cover 3mm thick having internal dimension 100x100x600mm made out of 20mm thick wood with hinges, hasp and staple including polishing complete with samples at various strata met in boring including strata chart in duplicate

Material and labour for drilling trial bore through direct hammering (DTH) technique in any type of strata consisting of 200 mm dia drill bit for depth upto 250 m in sequance from ground level as given below for bore well complete as per IS- 2800 Part-1 1991. The following tests and reporting will be carried out by the contractor and approved by GE all as per IS- 2800 part 1 1991:- (i) Recording the well discharge during driling by a 90 degree V-notch (ii) Recording the water bearing horizon . (iii) Taking the samples from the bore well cutting for every 3 meter interval and every change in slrata if less than 3meter. (iv) Prepartion of litho logs based on these samples.(v) Drill time log to be prepared and prescribed.(vi) Aquifer performance tests at constant discharge with draw down and recovery reading.(vii) Interpretation of data and preparation of hydro scientific report for designing of submersible pump and artificial recharge studies.

Supply assembling, jointing, lowering and fixing in the bore hole uPVC Casing pipe of Nominal Dia 200 mm (medium well) ,7.5 mm thickness.confirming to IS12818-2010 the casing/slotted pipe in bore well all as specified and directed. Make: Astral/Ashirwad/Ajay /Supreme

All as per item No 47.00 above but slotted pipe.

Developing the tube well by means with 250 PSI air compressor all as specified in IS-11189-1985 Para 4.3 and as directed.

Yield testing of the tube well as specified and directed to determine the safe pumping capacity of tube well. Note:- Cost of pumping for yield test is included in item No..49.00

Supply, installation/Lowering Submersible pumpset, discharge 150 LPM and head 80 m,Electric driven, 415 V, TP suitable for 100 mm dia borewell, stainless steel body, water filled,fitted with Non return Valve to prevent backflow,with submersible cable of rating as per manufacturer all as spd and directed by Engineer-in-Charge. Make: Crompton Greaves/ KSB/ Kirloskar brothers/ texmo

Supply and fix pump guard set with flange 63 mm all as specified and Directed

EXTERNAL ELECTRIFICATION M & L for LT panel Board cubical KIOSK Outdoor type compact 415 Volts AC 50 Hz, 4 wire +E, fabricated Polycarbonate, Nominal Size 1100mmX1950mmX660mm, RAL 7035 finish confirming to IP 54 complete including Copper bus bar 400 Amps, 30 KA, 4 strip mounted on porcelain insulated & enclosed in chamber, bottom cable entry comprising of following :- (a) Incoming MCCB 160 Amps four pole with microprocessor based release, having breaking capacity 36 KA, ---01 No (b) Outgoing MCCB 100 Amps four pole with microprocessor based release, having breaking capacity 25 KA, ---02 No. (c ) Outgoing MCB 63 Amps, Four Pole,Breaking Capacity 10 KA...........01 Nos. (d) Outgoing MCCB 4 pole160 Amp with microprocessor based release, having breaking capacity 36 kA -01 nos. Make :- LT Panel – hensel/Neptune/universal MCCB-L&T/Siemens/schnieder Meter-HPL/secure/L&T

M & L for LT panel Board cubical Indoor type, wall mounted compact 415 Volts AC 50 Hz, 4 wire +E, fabricated Polycarbonate, Nominal Size 990 mmX 950mmX 321mm, RAL 7035 finish confirming to IP 54 complete including terminal block 10 Sqmm, bottom cable entry comprising of following (a) Incoming MCCB 80 Amps four pole with Microprocessor based release having breaking capacity 25KA, ---01 No (b) Outgoing MCB 63 Amps DP, 10KA….6 Nos (c) Indicating lamps set RYB - 01 set (d) Energy meter, AC single phase of accuracy class 1.0, 240 V, 50 Hz with Backlit LCD display of rating 5 - 30 A, (measures and displays KWH ,V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box----------6Nos Make :- LT Panel – hensel/Neptune/universal MCCB-L&T/Siemens/schnieder Meter-HPL/secure/L&T

M & L for LT panel Board cubical Indoor type, wall mounted compact 415 Volts AC 50 Hz, 4 wire +E, fabricated Polycarbonate, Nominal Size 990 mmX 950mmX 321mm, RAL 7035 finish confirming to IP 54 complete including terminal block 10 Sqmm, bottom cable entry comprising of following (a) Incoming MCCB 80 Amps four pole with Microprocessor based release having breaking capacity 25KA, ---01 No (b) Outgoing MCB 63 Amps DP, 10KA….4Nos (c) Indicating lamps set RYB - 01 set (d) Energy meter, AC single phase of accuracy class 1.0, 240 V, 50 Hz with Backlit LCD display of rating 5 - 30 A, (measures and displays KWH ,V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box----------5Nos Make :- LT Panel – hensel/Neptune/universal MCCB-L&T/Siemens/schnieder Meter-HPL/secure/L&T

Supply and fix octagonal hot-dip galvanized street light poles including junction box, height 7 mtrs, top dia 70mm, bottom dia 130 mm, sheet thickness 3 mm, base plate 220x220x12,foundation nut bolts as per manufacturer recommendation including reinforced cement concrete foundation and hot dip galvanised bracket single arm for fixing of street light and one no of MCB 6 amp including 25 Amp four way terminal block all as spd and directed. MAKE: BAJAJ/SURYA/PHILIPS/UTKARSH

Supply & fix LED lights, Nominal watt 35 Watt, Nominal lumen efficacy 90 lumen/Watt, high pressure die cast aluminium housing, 140-270V, 50 Hz, PF>0.95 LED street light luminaries to be mounted on octagonal hot-dip galvanized street light poles including 3 core 1 sqmm PVC insulated copper cable from control box to fitting complete all as spd and as directed by Engr-in-Charge Make: Philips)/ Wipro(Skyline) /Osram(Strada plus) complete all as spd and directed

“Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 (Part I and II) for protection of underground calbes of size 90 mm outer dia with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/Poly/Gemini”

Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 ( Part I and II) for protection of underground calbes of size 63 mm outer dia with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/Poly/Gemini

SOLAR WATER HEATER Supply, installation & testing Solar Water heating system of capacity 100 LPD consisting of flat plate collector box fabricated from aluminium extruded sections by means of gas welding or brazing leak proof fully insulated with glass wool (48Kg/M3) with supporting structure duly painted with synthetic enamel black paint over a coat of zinc chromate red oxide primer provided with absorber made from copper sheet & copper tubes with protective coating complete with header grommet, storage tank made from stainless steel sheet of minimum 20 SWG thickness with puff insulation of minimum 50 mm girth outer including of 55-26 SWG brass socket & nipple fully insulated with glass wool with cold & hot water piping, gun metal valves, coil type stainless steel heat exchanger complete conforming to IS-12933 & 12976 with necessary wiring fixed on PCC platform, cold water tank & make up water tank capacity 100 Litres per day capable to supply hot water at 60° C all as specified and directed . Make :- "RACOLD/Honey well/Bosch Notes for item No. 1 above (i) The system will be provided with electric back up 2KW for 100 litre and 3 kw for 200 litre capacity solar water heating system. (ii) The hot water pipe shall be 20mm KITEC (PE-AL-PE) and its cost up to 5.00 RM shall be deemed to be included in rates quoted against respective item. (iii) The thickness of stainless steel sheet of storage tank will be 20 gauge.

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 2.5 sq mm ,3 core, 1100 Volts grade.

TELEPHONE CONDUIT M&L for RJ11 Telephone Jacks 1 module with pressed steel sunken box Equipped with modular Jack connector with 1/4 turn terminal for fast connection all as spd and directed. Make :- Legrand (myrius) / Havells (ORO)/Anchor(vision)

M&L for TV socket outlet, 1 module complete all as spd and directed. Make :- Legrand (myrius) / Havells (ORO)/Anchor(vision)

M&L for 10 Pair Telecom Junction box withKrone frame all as spd and directed. Make :- Finolex/HPL

M&L for 0.5mm 2 Pair Telephone cable PVC insulated copper conductor all as spd and directed. Make :- RR kabel /HPL/Havells

M&L for TV Cable of 1.02 mm (Nominal dia) insulated of Foam PE copper conductor all as spd and directed. Make :- RR kabel /HPL/Havells

RAMDEV CONSTRUCTION CO.

M/s Kishan Gopal Agarwal