Pdg. Street lights in central verge of Thanesar Umri road (Four lanning portion) in District Kurukshetra (Recall).

Amount

1: - Suply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. Size 1.50 sqmm ( 48 / 0.20mm). 31.9 (i) d

2: - Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 amp.to 60 amp. 415 V ,10 KA 3-phase. (i) 31.12 c

3: - Miniature Circuit Breaker & Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. 31.17a) (ii)

: - TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp. 31.17(a) (iii)

4: - Pipe Laying. Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 65 mm dia on flushed.(xiv) 31.21

5: - Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required. 31.22(i)

: - Extra for using salt and charcoal / coke for pipe earth electrode as required. 31.22(ii)

: - Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . 31.22(xvi)

6: - Under Ground Cables. Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. 16 Sq. mm 4 Core Ard. Cable . 31.26

: - 25 Sq. mm 4 Core Ard. Cable . 31.26

7: - Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . 31.28 (ii)

: - 25 Sqmm to 50 Sqmm Cable 2 to 4 Core. 31.28 (iii)

8: - (v)Pedestal . Supply and erection of Godrej Almirah type M.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- M.S.pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level . 31.33 (ii)

9: - Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Size 1.5 sqmm (3 / 0.81mm). 31.40 (i)

10: - S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. 4-way, TP & N (Horizontal) (8+12) 31.41 (v)

11: - Supply and erection of copper lugs including crimping etc. upto the entire satisfaction of Engineer-in-Charge of work. Size 1.5 sqmm to 2.5 sqmm 31.45

12: - S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 meter below ground level including digging & refilling of Earth including cost of suitable size soicket /coupler for HDPE pipe including the cost of labour & material required to complete the job in all respect upto the entire satisfaction of Engineer in charge of the work. HDPE pipe 63 / 50mm outer dia / inner dia 31.67 (i)

: - HDPE 90/75 mm outer dia / inner dia (i)

13: - Supply and erection 8Mtr. Decorative Pole is made out of galvanized mild steel tube & cast iron embellishment at bottom and step up part as shown in drawing. The bottom part of the pole (2000mmx195mmx 4.8mm) shall be made out of B class galvanized mild steel tube in which a service window is provided with 6 amp SP MCB & 32 amp heavy duty 4 way connector for loop in and loop out arrangements. The MCB & connector shall be provided in the service window duly fitted on a suitable size heavy duty Bakelite plate. The top part of the pole (6000mmx114mmx4mm) shall also be made out of B class galvanized mild steel tube having cast iron/ cast aluminium embellishments (ring) shall be fitted by grubs screw at the middle part of 114mm dia pipe and as per the drawing. The pole is properly machine and treated before primer coating & painted with polyurethane paint having minimum DFT 90 micron. The approximate weigh of pole-159Kgs. The pole is having base plate 400x400x20mm duly welded with stepner and suitable for mounting on concrete pedestral with four nos. foundation bolt is properly machine and treated before primer coating & painted with polyurethane paint as per attached drawing and accessories required to complete the job in all respect including erection, fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. Make : Twinkle (Lite) / Twinkle (Luxmax) / Jaquar / Keslec / May fair. NS -1

14: - Const. of R.C.C Foundation for 8 Mtr. (8000 mm) Decorative Poles (Cast Iron) 1:1.5:3 for foundation, size 0.7M x 0.7M x 1.8M with minimum of 8 nos 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm C.C for fixing the pole with all labour & material (T & P) etc. required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. NS -2

15: - Supply and erection of Decorative ornamental Double Arm bracket made out of mild steel tubes with cast aluminium embellishment as per drawing suitable for mounting of twin nos. drop down hanging installation of luminaires. The brackets are primer coated and painted with polyurethane paint with minimum DFT 90 micron. Weight-27Kgs as per attached drawing and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. Make : Twinkle (Lite) / Twinkle (Luxmax) / Jaquar / Keslec / May fair. NS -3

16: - Supply and erection of Ornamental 120 Watt LED Drop Down Luminaire made out of cast aluminium housing. The fixture housing top part is further covered and decorated by sperate cast aluminium bowl shaped attachment as per drawing. The fixture is provided with polycarbonate frosted diffuser for glare free lighting. MCPCB having high lumen led are mounted on cast aluminium/ extruded aluminium heat sinks. The fixture should have efficacy of 100lumen/watt, power factor- 0.95 , THD- <10% BIS approved potted driver. Fixture is duly powder coated PU painted with minimum DFT 90 micron as per attached drawing and accessories required to complete the job in all respect including erection on existing ornamental pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. Make Twinkle (Lite) / Twinkle (Luxmax) / Jaquar / Keslec / May fair. NS -4

17: - Pdg. trench less boring below existing road / pavement including laying of 65mm dia GI pipe B class required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. NS -5

18: - Supply and erection of 65 amp. 3 Pole/230V Astronomical automatic time switch alongwith contractor of required capacity movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechageable nicket cadium cell for 150 hours in the evnt of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work. Make as per approved list. NS -6

19: - Supply & erection of enclosure for MCCB 32/63 Amp. Complete with labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. NS -7

M/s JSB Enterprises

Choudhary Electricals

M/s P.S. Electric

Chopra Electric Company