CERTAIN REPAIRS TO FLOORING TILING ROOF AND OTHER MISC BR WORKS IN TECHNICAL AREA AT AF STN JODHPUR UNDER GE (AF) JODHPUR

Amount

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below/above ground level) including floor finishes complete all as specified & directed .

Dismatling floor hearth or wall tiling including cement mortor bedding but not backing removing serviceable tiles to store and rubbish off the premise complete all as specified & directed .

Material & labour for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelling course finished even and fair for laying floor finishes etc complete all as specified & directed by the Engineer-in-Charge.

Material & labour for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge.

Material & labour for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engr-in-Charge.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified & directed .

S&F Anodised aluminium snap grid frame work (600mm X 600 mm) for false ceiling complete all as specified & directed .

S&F 8 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600mm grid for Exposed metal frame ceiling complete all as specified & directed . (Note :- Frame work for ceiling shall be measured and paid separately)

M&L for preparation of new decorated plastered or unplastered surfaces of ceilling and applying two coat of oil bound distemper white or tinted complete all as specified & directed .

Taking down shutters of any description exc 1 sqm but not exceeding 2 sqm each complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing Flush shutters,30mm thick solid core construction, with block board core and plywood face panels, both faces are covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

Supply & fixing stainless steel barrel tower bolt of size 150mm fixed in positions complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 125mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and as directed.

Supply & fixing stainless steel handles of size 125mm, complete all as specified and directed.

Supply & fixing 300 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet complete all as specified and directed.

Dismantling boarding, any description, fixed any position with nails complete all as specified and directed.

M&L for Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.

Supply & fixing in repairs 25 mm dia stainless steel curtain rod decorative type design and pattern approved by GE including both end supports complete all as specified and directed.

Supply & fixing in repairs 25 mm dia stainless steel curtain finials for curtain rod both ends complete all as specified and directed.

Material & labour for granite of 18mm to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble over and including 20mm screed bed in cement mortar 1:4 complete all as specified and directed by the Engineer-in-Charge.

Rounding/chamfering to edge of stone slab like granite, marble, kota stone etc to required shape & design including grinding & polishing to obtain required finished complete all as specified and directed.

Dismantling of old unserviceable, rusted, broken (corrugated/semi corrugated, etc.) CGI/AC/ Fibre glass sheets in ridge and roof coverings complete all as specified & directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling timber scantlings 40 sqcm and over in section, in any position, from framed works complete all as specified & directed by the Engineer-in-Charge.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) Quality-B complete all as specified & directed by the Engineer-in-Charge.

Supply & fix Pre-painted galvalume GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

DEV INDUSTRIES

VIKAS CONSTRUCTION CO.

Keystone Constructionare

psj build solutions and company