Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.2 LAccepted-AOC 346 2 RAMBIR COLONY RAILWAY ROAD JIND JIND JIND JIND HARYANA 126102 | JIND | HARYANA | 126102 | ₹14.2 L | L1 | Accepted-AOC Lowest bidder |
| 2 | L2₹17.5 LRejected-AOC | ₹17.5 L | L2 | Rejected-AOC Other than lowest |
| 3 | L3₹17.7 LRejected-AOC | ₹17.7 L | L3 | Rejected-AOC Other than lowest |
| Sl No | Description | Qty | Unit | RAJ KUMAR L1 | AJAY KUMAR MODGIL L2 | kuiper tech private limited L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respect. | 2,025 | Cum | 330 ₹6.7 L | 299 ₹6.1 L | 430 ₹8.7 L |
| 2.00 | Laying, jointing and testing of GMS tube (screwed and socked) in trenches of following diameter light grade including providing and fixing tube fittings such as bends, tees, air valves, unions and collars etc. complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for separately). 50 mm dia | 3,000 | Rmt | 60 ₹1.8 L | 45 ₹1.4 L | 48 ₹1.4 L |
| 2.01 | 40 mm dia | 4,000 | Rmt | 50 ₹2 L | 40 ₹1.6 L | 40 ₹1.6 L |
| 2.02 | 32 mm dia | 5,000 | Rmt | 38 ₹1.9 L | 37 ₹1.9 L | 32 ₹1.6 L |
| 3.00 | Providing and fixing cast steel double flanged sluice valve as per IS:10611-1983 latest with upto date ammendments of Kirloskar/Leader/KSB/Pelican make of following diameter, ASA-150 including MS Flanges Table - 17, confirming to IS: 6392-1971 or latest with upto date ammendments including cutting of pipes wherever required, welding in three layers (leak proof) confirming to specifications as perescribed in relevant IS code i.e. IS: 816-1969 or latest as applicable with upto date ammendments with nuts, bolts, washers & specials etc. confirming to relevant IS code or latest with upto date ammendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorrosive paints complete in all respect including all leads and lifts and as per entire satisfaction of the Engineer-in-charge. 65 mm dia class ASA-150 | 2 | Nos. | 18,000 ₹36,000 | 16,500 ₹33,000 | 33,000 ₹66,000 |
| 4.00 | Providing and fixing of Gun Metal Gate Valve (with hand wheel) (Class-I) confirming to IS: 778-1984 in (reaffirmed-2007) incorporating amendment 1,2 and 3 of following dia with in all leads and lifts as per the direction of the Engineer-in-charge. 65 mm dia | 4 | Nos. | 2,900 ₹11,600 | 3,200 ₹12,800 | 15,000 ₹60,000 |
| 4.01 | 50 mm dia | 2 | Nos. | 1,800 ₹3,600 | 2,400 ₹4,800 | 13,000 ₹26,000 |
| 4.02 | 40 mm dia | 3 | Nos. | 1,600 ₹4,800 | 1,900 ₹5,700 | 12,000 ₹36,000 |
| 4.03 | 32 mm dia | 4 | Nos. | 1,200 ₹4,800 | 1,600 ₹6,400 | 12,000 ₹48,000 |
| 5.00 | Providing, installation, testing and commissioning of submersible/monoblock booster pump set (water filled/air cooled as applicable) of standard make such as Kirloskar/KSB/BS or any other make approved by HP JSV, conforming to relevant IS codes (IS: 8034-1976 for submersible pump set / IS: 9079 latest for monoblock pump) with up-to-date amendments. The pump set shall be capable of handling 24.20 metre head with (+) 10% / (–) 15% variation in head and shall be operable on 240 volts single phase AC supply. The discharge shall be 2.40 litres per second in all leads and lifts, with 2 sets working and 2 sets standby, complete in all respects to the entire satisfaction of the Engineer-in-charge. Total head=24.20 Mtrs. Discharge= 2.40 LPS | 4 | Sets | 30,000 ₹1.2 L | 1,50,000 ₹6 L | 50,000 ₹2 L |
Tender Value
₹23.0 L
EMD Value
₹46,100
Closing Date
30 Mar 2026, 5:00 pmClosed
Executive Engineer
Jal Shakti Division Sundernagar
Construction and installation of system deficiency works in distribution system
2026_HPIPH_131969_1
EE JSD SNR TA etender 2025-17776-17800 dt. 19.03.2026
Open Tender
Civil Works - Water Works
180 days
Sundernagar
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
₹46,100
27 Apr 2026
19 Mar 2026
31 Mar 2026
19 Mar 2026
30 Mar 2026
19 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respect. | - | Cum | - | - | |
Laying, jointing and testing of GMS tube (screwed and socked) in trenches of following diameter light grade including providing and fixing tube fittings such as bends, tees, air valves, unions and collars etc. complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for separately). 50 mm dia | - | Rmt | - | - | |
| 2.01 | 40 mm dia | - | Rmt | - | - |
| 2.02 | 32 mm dia | - | Rmt | - | - |
Providing and fixing cast steel double flanged sluice valve as per IS:10611-1983 latest with upto date ammendments of Kirloskar/Leader/KSB/Pelican make of following diameter, ASA-150 including MS Flanges Table - 17, confirming to IS: 6392-1971 or latest with upto date ammendments including cutting of pipes wherever required, welding in three layers (leak proof) confirming to specifications as perescribed in relevant IS code i.e. IS: 816-1969 or latest as applicable with upto date ammendments with nuts, bolts, washers & specials etc. confirming to relevant IS code or latest with upto date ammendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorrosive paints complete in all respect including all leads and lifts and as per entire satisfaction of the Engineer-in-charge. 65 mm dia class ASA-150 | - | Nos. | - | - | |
Providing and fixing of Gun Metal Gate Valve (with hand wheel) (Class-I) confirming to IS: 778-1984 in (reaffirmed-2007) incorporating amendment 1,2 and 3 of following dia with in all leads and lifts as per the direction of the Engineer-in-charge. 65 mm dia | - | Nos. | - | - | |
| 4.01 | 50 mm dia | - | Nos. | - | - |
| 4.02 | 40 mm dia | - | Nos. | - | - |
| 4.03 | 32 mm dia | - | Nos. | - | - |
Providing, installation, testing and commissioning of submersible/monoblock booster pump set (water filled/air cooled as applicable) of standard make such as Kirloskar/KSB/BS or any other make approved by HP JSV, conforming to relevant IS codes (IS: 8034-1976 for submersible pump set / IS: 9079 latest for monoblock pump) with up-to-date amendments. The pump set shall be capable of handling 24.20 metre head with (+) 10% / (–) 15% variation in head and shall be operable on 240 volts single phase AC supply. The discharge shall be 2.40 litres per second in all leads and lifts, with 2 sets working and 2 sets standby, complete in all respects to the entire satisfaction of the Engineer-in-charge. Total head=24.20 Mtrs. Discharge= 2.40 LPS | - | Sets | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.39 MB
Form6.pdf
Tender Documents • 0.03 MB
Form8.pdf
Tender Documents • 0.48 MB
Termsandconditions.pdf
Tender Documents • 0.01 MB
BOQ_195144.xls
BOQ • 0.55 MB
Download all tender documents and submit your bid