Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.6 LAccepted-AOC | ₹5.6 L | L1 | Accepted-AOC L1 |
| 2 | Rejected-Technical | - | - | Rejected-Technical L2 |
Tender Value
₹5.6 L
EMD Value
₹13,919
Closing Date
27 Jan 2024, 3:00 pmClosed
AE
lidew mpza
SPMotelsto police station road maintenance
2024_LSGD_645973_1
ETPNO.218/AE/LIDEW/2023-24
Open Tender
Civil Works - Roads
Item Rate
180 days
MALAMPUZHAGP
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,230
₹13,919
Yes
25 Jun 2024
20 Jan 2024
31 Jan 2024
20 Jan 2024
27 Jan 2024
20 Jan 2024
Amount
retarring
OD248535/2023-2024:Filling up pot holes ( cut and formed to regular shapes and loose and defective materials removed ) after supplying prime coat of hot bitumen using 36 mm broken stone and compacting with power roller to get compacted surface.
3.14:Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.
75.5.2.2pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65)
name board
OD248532/2023-2024: Supplying and providing ready made GI name board with all conveyance, labour and hire charges etc. complete - using GI hollow tube of size 80 x 40 x 1.4 mm post, 40 x 20 x 1.4 mm outer frame , 0.60 mm thick iron sheet of size 90 x 60 cm with two coat of enamel painting over a coat of primer, lettering with suitable colour and size and fixing the post in ground with CC 1:2:4 etc. complete.
K Chenthamarakshan
Bidder Name
K Chenthamarakshan
AJI T PHILIP
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_989669.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .