Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹20.9 CrAccepted-AOC | ₹20.9 Cr | L 1 | Accepted-AOC Lowest One work order issued on 07.03.2024 |
| 2 | L 2₹22.0 CrRejected-AOC | ₹22.0 Cr | L 2 | Rejected-AOC Second Lowest Unsuccessful tenderer EMD amount to be refund |
| 3 | L 3₹22.1 CrRejected-AOC NO 4 6 1 KALABAIRAVANKADU SETTIYAR KUTHAGAI AYAKKARANPULAM II POST VEDARANYAM TALUK NAGAPATTINAM DISTRICT 614 707 | NAGAPATTINAM | TAMIL NADU | 614707 | ₹22.1 Cr | L 3 | Rejected-AOC Third Lowest Unsuccessful tenderer EMD amount to be refund |
| 4 | L 4₹22.5 CrRejected-AOC 9 A PONGALIVALASU KODUMUDI POST ERODE 638 151 | KARUR | TAMIL NADU | 638151 | ₹22.5 Cr | L 4 | Rejected-AOC Fourth Lowest Unsuccessful tenderer EMD amount to be refund |
| 5 | L 5₹22.9 CrRejected-AOC 5 217 D1 TEACHERS COLONY MOHANUR ROAD NAMAKKAL 637001 | NAMAKKAL | TAMIL NADU | 637001 | ₹22.9 Cr | L 5 | Rejected-AOC Fifth Lowest Unsuccessful tenderer EMD amount to be refund |
Tender Value
₹26.9 Cr
EMD Value
₹13.6 L
Closing Date
22 Jan 2024, 6:00 pmClosed
Superintending Engineer South Circle TNPHC Ltd
Tamil Nadu Police Housing Corporation Limited South Circle No I Inspector Quarters TSP VI Battalion Campus New Natham Road Madurai 625014
Construction of Administrative Block, Compound walls (1.8m, 5.5m, 6.5m height) with development works for the setting up of High Security Prison at SURIYUR VILLAGE, THIRUVERUMBUR TALUK in Trichy District (Group-I)
2024_TNPHC_406566_1
SE/SC No.48/2023-2024-2
Open Tender
Civil Works
335 days
SURIYUR VILLAGE THIRUVERUMBUR TALUK IN TRICHY
Refer tender documents
9 documents required · 9 mandatory
₹0
₹13.6 L
8 Mar 2024
6 Jan 2024
24 Jan 2024
6 Jan 2024
22 Jan 2024
6 Jan 2024
Amount
1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.
1.3) Earth work excavation in Soft disintegrated rock (including refilling) a. 0 to 2 mt.
b. 2 to 3 mt.
1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.
1.6) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.
7.2) Supplying and fixing of Bituminous filler pad, 20 mm tk. for expansion joint
13.1) Filling with excavated earth
21.2) Teak wood Wrought & Put up a. T.W. over 2.00 m & below 3.00 m
b. T.W. below 2.00 m length.
23.3) Supplying and fixing of Magnetic door catches
25) Supplying and fixing of MS hold fast
30) Finishing the top of flooring with cement concrete 1:3, 20mm thick Ellispattern flooring (No sand)
31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume
37.1) White washing 3 coats (slaked)
39) Supplying and fixing of MS Grills in position
40) Painting 2 coats - New "wood work"
41) Painting 2 coats - New "iron work"
46) Supplying and fixing of 20 mm dia Alu. Hanger Rod
47) Supplying and fixing of Alu. Towel rail 75 cm long
48) Supplying and fixing of 5 pin Coat stand
49) Supplying and fixing of Chromium plated 8 gauge picture hook
50.3) Supplying and planting avenue trees
50.4) Providing Triangular shape Tree guard
52) Supplying, laying, fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 including the cost of suitable PVC/GI/GM specials a. 32 mm dia
b. 25 mm dia
c. 20 mm dia
53.3) Supplying and fixing of C.I. steps (5 Kg)
55.2) Supplying and fixing of Flat Back Urinal with Accessories
Electrical arrangements 69) Supplying and fixing of 15 Amps 3 pin Power plug socket
72) Supplying and fixing of Box type Fibre Fan hook
73.2) Supplying and fixing of 3 phase Distribution board with 4 way per phase 32A per way with neutral link
74) Charges for assembling and fixing of ceiling "Fan"
76) Supplying and fixing of 8 SWG G.I. wire
77.3) Supplying and fixing of TV/Telephone line Socket
77.4) Supplying and fixing of 20mm dia PVC pipe for TV/Telephone line
78) Providing Earthing Station using pipe electrode as per IS3043 (Type I)
86) Providing Pre-constructional Anti termite treatment
112) Supplying and fixing of Exhaust Fan 300 mm dia
Annexure 2.1.1) Supplying and filling the Foundation and basement with gravel
2.1.3) Supplying and filling in foundation and basement with Crushed stone sand
3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand
3.2.1) P.C.C. 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand with Admixture
4.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture a. In Foundation and basement
6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture
8.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture a. In Ground Floor
b. In First Floor
c. In Second Floor
9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture a. In Ground Floor
b. In First Floor
c. In Second Floor
10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture a. In Foundation and basement
b. In Ground Floor
c. In First Floor
11.6.1) Brick work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") 70 mm tk using crushed stone sand with Admixture (B.P.) a. In Ground Floor
b. In First Floor
12.1.1) Brick partition work in C.M. 1:4 using kiln burnt Country bricks of size 22 x11x 5 cm (8¾ "x 4¼ "x 2") 50mm tk using crushed stone sand with Admixture a. In Ground Floor
b. In First Floor
c. In Second Floor
14.2.2) Precast Cupboard slab 20mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture a. In Ground floor
b. In First floor
14.2.3) Precast Cupboard slab 40mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture a. In Foundation & Basement
18.1) Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,
b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works
c. For Square and rectangular columns and small quantities
d. For Vertical wall
f. For Circular Surface
21.5.2) Supplying and fixing of soild UPVC door shutter with frame
21.5.3) Supplying and fixing in position of UPVC window of casement type (open) for all sizes
21.5.4) Supplying and fixing in position of UPVC louvered ventilator type for all sizes
22.3.3) Cup board/ward robes double leaf shutters using 9mm thick phenol bonded BWR grade plywood, TW frames, styles & rails including two coat enamel paint over one coat primer with brass screws
23.1.2) T.W.single leaf door shutter using 9mm thick phenol bonded BWR grade plywood with brass screws. Suitable for door of size a. 900 x 2400mm
26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand
28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture
29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand
29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand
32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand
33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture
34.1) Plastering in C.M. 1:4, 12 mm tk. using crushed stone sand with Admixture
35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture
36.1) Plastering for Border in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture a. 150 mm wide Border
b. 75 mm wide Border
38.4.2) Providing one coat of wall putty for new plastered surface
43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods
44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M20 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand with Admixture a) Providing pit
b) Augering 30cm dia
44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe
50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450x300x150 mm using crushed stone sand
50.6.1) Precast slab 50 mm tk.in C.C.1:3:6 mixed with fibre using crushed stone sand
51.1) Supplying and fixing of HDPE water tank 700 lit capacity with ISI mark
52.4) Supplying laying fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 threaded PVC water supply ASTM pipe (fully consealed in walls) with necessary PVC/GI/GM specials c. 20mm dia
53.4) Supplying and fixing of CI Manhole cover of size 60 x 60cm (50kg weight)
53.5) Supplying and fixing of Wash hand basin (White without Pedastal type) of size 550 mm x 400 mm (22"x16")
54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body)
54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body)
56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand
56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand
57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap
58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.
b. 75 mm dia
58.4) Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - 'B' with relevant specials.
59.5.2) Supplying and fixing 150mmx100mm size stone ware Gully trap
60.1) Supplying and fixing of PVC Nahani trap (4way/2way)
61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe
b) 160mm dia UPVC Non Pressure pipe
62.1.1) Supplying and fixing of PVC Bend fabricated 6 KSC as per IS 10124/1982 Part II a) 110mm dia PVC Bend
b) 160mm dia PVC Bend
64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose
b. Light point without ceiling rose with bakelite battern holder
c. Calling bell point with Buzzer/Calling bell
65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan Point
66.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point
67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Switch Board Itself
68.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places
75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep
77.6) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed.
77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed
87.1) Supplying and fixing of Three Phase ELCB/RCCB
87.2) Supplying and fixing of 20 Amps DP plug and socket in sheet enclosure with 32A DP MCB in Flush with wall with earth connection (For AC Plug)
90.2) Providing additional strutting to centering of plain surface
98.4.5) T.W.single leaf Panelled door shutter with Aluminium fittings with brass screws Suitable for door of size a. 1000 x 2400mm
98.4.6) T.W.double leaves Panelled door shutter using Aluminium fittings with brass screws Suitable for door of size b. 1500 x 2400mm
99.4) T.W. double leaves Panelled door shutter with brass fittings Suitable for door of size a. 1800 x 2400mm
100) Supplying and fixing of 9 watts LED Bulb
101.1) Supplying and fixing of 30 watts LED with street light fittings
102) Supplying and fixing of 4'18 watts crystal LED tube light fittings
103) Supplying and fixing of Bulk Head fitting suitable for 12 watts LED bulb
104) Supplying and fixing of 12 watts LED bulb
105.1) Run off main 4 wires of 4 Sq mm. (3 phase EB service connection)
114) Supplying and delivery of following PVC Aluminium armoured LTUG cable a) 2 core 25 Sqmm PVC Aluminium armoured LTUG cable
115) Labour charges for laying of 2 core 25 Sqmm PVC Aluminium armoured LTUG cable below ground level
116) Labour charges for laying of 2 core 25 Sqmm PVC Aluminium armoured LTUG cable above ground level
117) Supplying and fixing of Brass cable Gland suitable for 2 core 25 Sqmm PVC Aluminium armoured LTUG cable
119) Supplying and delivery of vertical wet type three phase 5.0 HP submersible pumpset
119.1) Supplying and delivery of 10 HP Openwell submersible pumpset
120) Labour charges for erection of submersible pumpset in borewell / openwell upto 5 HP
120.1) Labour charges for erection of submersible pumpset in borewell / openwell Above 5 HP to 10 HP
121.1) Supply and delivery of three phase 2 HP panel board star-Delta starter
122) Supplying and fixing of following dia of the UPVC, GI & GM specials TEE a) 100mm dia UPVC Tee
b) 80mm dia UPVC Tee
c) 65mm dia UPVC Tee
d) 50mm dia UPVC Tee
e) 40mm dia UPVC Tee
f) 32mm dia UPVC Tee
g) 25mm dia UPVC Tee
h) 20mm dia UPVC Tee
UNION a) 20mm dia UPVC Union
b) 25mm dia UPVC Union
c) 32mm dia UPVC Union
d) 40mm dia UPVC Union
e) 50mm dia UPVC Union
f) 65mm dia UPVC Union
g) 80mm dia UPVC Union
h) 100mm dia UPVC Union
BEND a) 100mm dia UPVC Bend
b) 80mm dia UPVC Bend
c) 65mm dia UPVC Bend
d) 50mm dia UPVC Bend
e) 40mm dia UPVC Bend
f) 32mm dia UPVC Bend
g) 25mm dia UPVC Bend
h) 20mm dia UPVC Bend
COUPLER a) 100mm dia UPVC Coupler
b) 80mm dia UPVC Coupler
c) 65mm dia UPVC Coupler
d) 50mm dia UPVC Coupler
e) 40mm dia UPVC Coupler
f) 32mm dia UPVC Coupler
g) 25mm dia UPVC Coupler
h) 20mm dia UPVC Coupler
GI ELBOW a) 100mm dia GI Elbow
b) 80mm dia GI Elbow
c) 65mm dia GI Elbow
d) 50mm dia GI Elbow
e) 40mm dia GI Elbow
f) 32mm dia GI Elbow
g) 25mm dia GI Elbow
h) 20mm dia GI Elbow
Gun Metal Gate Valve (Heavy Duty) a) 100mm dia GM Gate valve
b) 80mm dia GM Gate valve
c) 65mm dia GM Gate valve
d) 50mm dia GM Gate valve
e) 40mm dia GM Gate valve
f) 32mm dia GM Gate valve
g) 25mm dia GM Gate valve
h) 20mm dia GM Gate valve
GM Non Return valve a) 80mm dia GM Non Return valve
b) 65mm dia GM Non Return valve
c) 50mm dia GM Non Return valve
d) 40mm dia GM Non Return valve
123) Supplying and Delivery of PVC insulated and sheathed 3 core 4 sq.mm flat type copper cable for submersible pumpset
125.1) Supplying and laying of following dia UPVC pipe below ground level a) 20mm dia UPVC pipe
b) 25mm dia UPVC pipe
c) 32mm dia UPVC pipe
d) 40mm dia UPVC pipe
e) 50mm dia UPVC pipe
f) 65mm dia UPVC pipe
g) 80mm dia UPVC pipe
h) 100mm dia UPVC pipe
125.2) Supplying and laying of following dia UPVC pipe Above Ground level a) 20mm dia UPVC pipe
b) 25mm dia UPVC pipe
c) 32mm dia UPVC pipe
d) 40mm dia UPVC pipe
e) 50mm dia UPVC pipe
f) 65mm dia UPVC pipe
g) 80mm dia UPVC pipe
h) 100mm dia UPVC pipe
125.3) Supplying and laying of following dia Rigid pipe below ground level a) 25mm dia Rigid pipe
126.1) Supplying and fixing of following dia M.S. Clamp set a) 150 mm dia MS clamp set
127) Supplying and delivery of required dia Nylon rope for tieing of submersible motor pump
128) Supplying and delivery of 40mm dia Cast Iron Adopter
132.1) Charges for developing the Borewell with Air compressor of 600 CFM capacity (Minimum 8 Hrs)
132.2) Drilling of 150mm dia vertical bores in hard rock area to any required depth as directed by the departmental officers including labour charges for inserting of casing pipes and assembling in the drilled hole, including joint if necessary grouting the casing pipe etc., a) Upto 150m depth ending below Ground Level
b) From 150m upto 180m depth ending below Ground Level
c) From 181m upto 210m depth ending from Ground Level
d) From 211m upto 240m depth ending from Ground Level
e) From 241m upto 270m depth ending from Ground Level
f) From 271m upto 300m depth ending from Ground Level
g) From 301m upto 330m depth ending from Ground Level
133) Supplying and delivery of following dia PVC casing pipe as per IS 12818/2010 a) 200mm dia PVC Casing Pipe
134) Supplying and fixing of 200mm dia PVC Bore end cap
134.2) Supplying, laying and fixing of following dia UPVC column pipe a) 40mm dia UPVC column pipe
255.1) Providing and fixing in position of 10mm tk Gyp board false ceiling
255.2) Providing Cornice Work for Gyp Board False Ceiling
255.3) Supplying and fixing in position of 6 rows of 10 gauge GI barbed wire 20 gauge
344.2) Supplying and fixing of Bevelled Edge Mirror of size 500x400x5.5mm
361.1) Supplying and laying of Concrete designer tiles flooring in C.M. 1:3 (one of cement and three of crushed stone sand) 20mm thick
367) Providing wooden melamine polish for main door new wood work
373) Supplying, testing, installation and commissioning of Air conditioner with copper coil 1.5 TR Split Type AC Unit - 3 Star Rated
374.1) Supplying and laying of 5/8" and 3/8" Copper pipe (Extra beyond 3 metres supplied with AC unit)
374.2) Supply and fixing of MS stand for fixing outdoor unit
375) Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay (V-guard/equivalent)
378.2) Supplying and laying of coloured marbonite Vitrified tiles Ivory colour of size 600mmx600mmx8mm in CM 1:3, 20mm tk using crushed stone sand
448.2) Supplying and fixing of PVC Tee with end cap of 32mm dia
563.1) Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end)
566.3) Supplying and fixing of Block out Roller Screen including labour charges for stitching charges
566.4) Supplying and erection of Precast RCC pillar of size 150x150x2400mm space with necessary reinforcement labour charges for casing, curing, conveyance and erection
566.5) Supplying and fixing of MS channel 75x40mm to a length of 1500mm (without support angle) fitted with 5 Nos. of 11 KV Post type insulators in each channel
566.6) Supplying and fixing of MS Channel 75x40mm to a length of 1500mm with support angle of 37.5x37.5x6mm MS angle fitted with 5 Nos. of 11 KV post type insulators in each channel
566.7) Supplying and run of 8 SWG copper Tin coated wire for live fencing over compound wall
566.8) Supplying and fixing of connecting kit cubical panel size 300x300x150mm using 1.8mm tk CZR sheet and powder coated with angle frame stand
572) Supplying fabrication and fixing in position of mild steel angles for truss including cost of all materials and labour charges
796) Two coats of Exterior emulsion paint including primer for outer wall
796.1) Two coat of Plastic emulsion paint including primer for inner wall
marimuthu gounder and co
SRI EZHUMALAIYAN CONSTRUCTION
Sri Balaji Constructions
ABIRAMI ENGINEERING CONSTRUCTION AND CO
S S Natarajan & Co
SRI RAMANA BUILDING CONSTRUCTIONS PRIVATE LIMITED
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid