Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | As L1₹14.4 LAccepted-AOC | As L1 | Accepted-AOC L1 | |
| 2 | As L2Rejected-Finance | As L2 | Rejected-Finance As L2 |
Tender Value
₹15.1 L
EMD Value
₹30,216
Closing Date
1 Sept 2017, 9:00 amClosed
Executive Engineer PWD BDN ELEC DIVN
Room no 1081st fl purta bhawan salt lake kolkata
Electrical Installations and allied works at Directorate of Public Instruction part of 8th and 9th floor North Block Bikash Bhavan Salt Lake Kol 91 EI work
2017_WBPWD_124735_1
WBPWD/EE/BED/31/e-IT of 2017_18/2nd call
Open Tender
ELECTRICAL WORKS M/R
Item Rate
20 days
Bikash Bhawan
Please refer Tender documents.
4 documents required · 4 mandatory
₹30,216
Yes
30 Sept 2021
18 Aug 2017
4 Sept 2017
19 Aug 2017
1 Sept 2017
19 Aug 2017
Amount
Dismantling the existing fittings & fixture, wiring, income & outgoing cable, SPN/ PBDB, metering arrangement etc. & mending good damages to the original finish as per direction of EIC.
S&F 8 way VTPN PBDB in SS enclosure (IP-43 protection) double door (Legrand / similar type) comprising of neutral link, earthing attachment on wall and mending good the damages to original finish incl. interconnection, cable entry box as per GS. Incoming-415V, 36KA, 4 FP 80A, MCCB (Legrand / similar type) ----1no Outgoing- 415V, 10KA, 63A TP MCB (Legrand / similar type) ----5 nos. 32A SPMCB --- 3 nos, Blank plate-- 6 nos.
S/F suitable size power coated cubical type compartmental panel board comprising with 1 no 10-60A 3 ph. direct energy meter (HPL/Bectec/ LT), 200A capacity bus bar with 4 nos cu bar arrangement with hole on porceline chair, 1 no 3 ph. 160A open execution type TPN SDFU (LT) with 3nos HRC fuse & hinge door necy. connection as per direction of EIC.
S/Laying 1.1 KV Gr. XLPE/Ar Al. cable on wall as required incl. S/F MS saddle with earthing attachment by 2 nos 10 Swg GI (Hot dip ) wire making holes mending good the damages as per GS as below:- 3.5 core 95 sq mm
4 core 25 sq mm
Supply & fixing 415V 4 way 16-32 A per way TPNMCB DB with SS enclosure double door with IP 42/43 protection with 63A 4 pole isolator as incommer and 12 nos 6-32A SPMCBs (C Curve 10KA) as outging on wall as per GS. (Legrand / similar type)
Supplying & fixing 250 V , 6-10A per way, 2+14 way SPN MCBDB with SS enclosure double-door with 40A DP isolator as incomer and 14 nos 6-10A SPMCBS ('C' curve, 10 kA) as outgoing on wall as per GS (Legrand/ similar type) incl. connection.
do--do-- 2+10 way SPN MCBDB with SS enclosure double-door with 40A DP isolator as incomer and 10 nos 6-10A SPMCBS ('C' curve, 10 kA) as outgoing on wall as per GS (Legrand/ similar type) incl. connection.
S/ drawing PVC insulated & unsheathed single core standed FR copper wire ( ISI ) in 20 mm dia PVC rigid conduit (Precision) complete with all accessories on wall as per GS as below : 2 X6 sqmm and 1 X 4 sqmm.
2 X4 sqmm and 1 X 2.5 sqmm.
2x 2.5 sq mm + 1X 1.5 sq mm.
S/F compression type cable gland as per GS for the following cable/ wire:- 3.5 core X 95 sq mm cable.
4 core X 25 sq mm cable.
Finishing end by solderless socket by crimping method as per GS for the following cable/ wire:- 3.5 core X 95 sq mm Al cable.
4 core X 25 sq mm Al cable.
2 X 6 + 1x4 sq mm cu wire
2 X 4 + 1x2.5 sq mm cu wire
2 X 2.5 + 1x 1.5sq mm cu wire.
Distn. Wiring by 2 X 1.5 sqmm & 1 X 1.5 Sqmm ECC single core "FR" PVC cu. wire in 20 mm bore PVC rigid conduit on wall to light/fan/call bell etc. point with modular piano key type switch (North West/ Cabtree/ Legrand/Schneider) fixed on modular board ( Av. Run 9 mtrs) as per GS.
do--do-- to 6A plug point incl. S/F Modular flush type 250V 1 No 6A Plug socket & 1 No 6A (North West/cabtree/ legrand/ Schneider) switches incl. earthing attachment (on board) as per GS.
do--do-- to separate 6A plug point incl. S/F Modular flush type 250V 1 No 6A Plug socket & 1 No 6A (North West/cabtree/ legrand/Schneider) switches incl. earthing attachment (Av. Run 7.5 mtrs) as per GS.
S/F modular flush type 250V 1 no 16A & 3 nos 6 A plug socket, 1 no 16A & 3 Nos 6 A Piano key type switch (North West/Cabtree/ Legrand/Schneider) incl. S/F Modular box with top cover on wall ( For computer board) necy. connection as per direction of EIC.
S/F 250V modular flush type 1 no. 16 A Plug Socket with 1 no. 16A switch (North West/Cabtree/Legrand /Schneider) on wall with modular switch board & top cover & necy. connection as per GS.
S/F twin TL5 fluorescent light fittings (Philips, TMS122 M 2xTL5-28W EBE/ similar type) complete with all accessories suspended below the ceiling by L clamp/ down rod arrangement with S/F 2 nos 28 W TL5 Lamp incl. necy. connection as per direction of EIC.
S/F single TL5 fluorescent light fittings (Philips, TMS122 M 1xTL5-28W EBE/ similar type) complete with all accessories suspended below the ceiling by L clamp/ down rod arrangement with S/F 1 no 28 W TL5 Lamp incl. necy. connection as per direction of EIC.
S/F 48" sweep AC ceiling fan complete with all accessories incl. connection (Make- Orient/ CG) as per GS & model approved by EIC.
S/F MS fan clamp of two piece type for RC ceiling as per GS
S/F modular type (step) 2 module electronics fan regulator incl. connection (North West/ Cabtree/ Legrand) as per GS.
S/F 4 module starter for AC with 16-25A/ 11-18A starter, DP MCB with GI box & connection (Make- North West/ similar) as per direction of EIC.
S/F modular flush type 250V 1 No 16 A plug socket (Cabtree/ Legrand/North West) with plug top incl. S/F modular box with top cover on wall & necy. connection as per direction of EIC.
S/F superior type call bell with moduler type bell push & ceiling rose incl. connection as per GS.
Charges for cutting the concrite floor upto 2" and mending good the damages to original finish as per direction of EIC.
S&F 3" aluminium U channel on floor for wire protection as per direction of EIC.
S/F 28W full glow recessed mounted type LED panel/ slim light fittings (Philips/ Wipro/ similar) complete with all accessories by iron chain/ GI wire arrangement from ceiling incl. necy connection as per direction of EIC.
Charges for cutting the false ceiling by co's tool and mending good the damages as original.
S/F circular type 12W Ultra Slim recessed mounted LED fittings (Philips/ similar) incl. driver on false ceiling after cutting the false ceiling as per direction of EIC.
S/F 400 mm sweep wall bracket fan complete with all accessories (Orient/ CG/Havells) on wall incl. connection as per EIC.
S/F 2 Module box with 2 module socket incl. connection as per GS.
S/F blank plate as per direction of EIC.
SITC of 250V Timer DB (equivalent of 8 Way SPN DB in size) with steel sheet enclosure double door (IP-43, power coated) comprising with 1 no. 25A DP RCBO (30 mA), 1 no. programmable digital Time Switch with minimum switching time of 15 minutes and 1 no. 18A/25A contractor complete with internal wiring by suitable size of copper wire including 1 No. Auto Manual bypass toggle/changeover switch and Provision for earthing attachment including LED indication light. (For 1.5/2.0 TR AC m/c) (Make:-Siemens/ABB/Hagger/similar.)
S/ F 6" decorative type exhaust fan on wall & making necy. Connection as per GS (Make- Havells/ CG/Orient).
L.W.C. must be quoted manually @1% on the total quoted value else the LWC shall be treated as included in quoted value.
BANDANA ENGINEERS CO-OPERATIVE SOCIETY LTD
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .