DEPOSITAlappuzha District PanchayathAryad Division Extension of pipe line laying for various places in Mannanchery Grama PanchayathPipeline Work

Amount

Working charge

2.33.2:Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth

15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

100.59.1:Cutting the bituminous / concrete roads with cutting machine for a minimum depth of 200mm along the sides of proposed alignment of the pipe to be laid without causing any damage to other utilities, including the charges for hire and conveyance of tools and plant, cost of consumables and charges for lighting, watching, ribbon fencing, caution boards, traffic diversion, and as per the direction of departmental officers etc. complete, before carrying out the demolition of bituminous / concrete road by mechanical means and carrying out the excavation.

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.9.7:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 75 mm nominal outside diameter pipes.

100.9.8:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 90 mm nominal outside diameter pipes.

100.12.9:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 100mm diameter nominal bore.

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

OD90458/2024-2025:For cutting, dismantling threading alignment and jointing all materials and labout etc complete

16.91.2:Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

OD80372/2024-2025:Interconnection work in 140mm x75mm uPVC (Class 2 to 6) pipeline including detecting and blockage, earth work excavation in all kinds of soil for exposing block portion of the pipe including tar cutting / concrete cutting, cutting the pipe diametrically perpendicular to the axis of pipeline without causing any damages to the balance portion, dismantling and lifting the pipe from trenches, smoothening the cut ends, conveying the new pipe, cutting and lowering new pipe into the trenches, placing in position, aligning the pipe to line and level and jointing the new pipe with the existing pipe with solvent cement or repairable joint and testing the pipeline by operating the valves concerned, and rectifying the defects if noticed and refilling the trenches in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, without causing any damages to the existing utilities, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, ribbon fencing, watching, traffic control etc., complete as per the direction of Departmental officers, including the cost of pipe & specials uPVC Pipes and specials shall be of good quality and conforming to relevant standards:

OD85749/2024-2025:od84973/2022_2023 :Interconnecting the existing 200/180/160/140/110/90/75 mm PVC line with the newly laid 110/90/75 mm PVC pipe by cutting the existing 200/180/160/140/110/90/75 PVC pipe diametrically, the cut being diametrically perpendicular to the axis of pipe and smoothening of cut ends, inserting suitable specials such as Tee/Saddle clamp /any other type supplied by the contractor and placing in position, jointing with solvent cement and testing to the required test pressure, including necessary earth work excavation, cost of specials supplied by the contractor, labour charges , and hire for tools etc; complete.Interconnecting with newly laid 75/90/110 mm PVC Pipe, tee, reducer, joints, elbow etc complete

OD86328/2024-2025:od407669/2021_2022 : Interconnecting the existing 160 mm PVC line with the newly laid 75 mm pvc pipe by cutting the existing160mm PVC pipe diametrically, the cut being diametrically perpendicular to the axis of pipe and smoothening of cut ends, inserting 160x75 mm PVC reducer, Tee(6 Kg/cm2) CIR joints, pvc pipe, elbow bend, and placing in position, jointing with solvent cement, testing to the required test pressure, cost of specials supplied by the contractor, labour charges , and hire for tools, valve operation etc; complete as per the direction of Engineer in charge.

OD86671/2024-2025:od407667/2021_2022 : Interconnecting the newly laid 75 mm pvc pipe line to the existing 110mm,cutting the existing110 PVC line diametrically, the cut being diametrically perpendicular to the axis of the pipe and smoothening the cut ends and inserting 1100 mm PVC Tee , 110mm CIR , 11075mm pvc reducer, 110mm elbow, supplied by the contractor and placing in position. jointing with solvent cement and testing to the required test pressure including cost of specials supplied, labour charges and hire for tools etc. complete.

OD87208/2024-2025:Interconnecting the existing 110 mm pvc line with the existing laid 110mm PVC pipe , and new laying 90mm , 110mm elbow,110mm pvc pipe, 90mm pvc endcap , etc compltesupplied by the contractor and placing in position and testing to the required test pressure, includingcost of specials supplied by the contractor, labour charges , and hire for tools etc; complete

OD87538/2024-2025:Supply and installation of 110mm PVC Bend

OD87541/2024-2025:Supply and installation of 110mm pvc endcap

OD87544/2024-2025:Supply and installation of 110mm PVC Elbow

OD88212/2024-2025:Supplying and installation of 75mm PVC elbow

OD88214/2024-2025:Supply and installation of 75mm TEE

OD88217/2024-2025:Supply and installation of 75mm pvc endcap

OD88283/2024-2025:Supply and installation of 75mm bend

OD88619/2024-2025:Supply and installation of 90mm endcap

OD90032/2024-2025:Supply and installation of 100mm dia GI pipe

100.98.441:Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Small Orifice Type S1, Size 40mm.

100.98.222:Supply of PVC Pipe, 8kg/cm2, 75mm Dia.

100.98.223:Supply of PVC Pipe, 8kg/cm2, 90mm Dia.

Road Restoration

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

CS.JOHN (BID ID -2093895)

VISHNUKUMAR M (BID ID -2092966)

V prakasan (BID ID -2083543)

DINESH N.R (BID ID -2093926)

PLOT WEAVER (BID ID -2087148)

nil (BID ID -2094257)

V.C. Sreekumar (BID ID -2093897)

Bidder Name

P.R.SELVAN

V.C. Sreekumar

V prakasan

CS.JOHN

DINESH N.R

PLOT WEAVER

VISHNUKUMAR M