Building Work

Construction of Transgender Toilet at Gandevi Court Ta. Gandevi Di Navsari

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Excavation for foundation upto 1.5 m depth including 22.30 Cumt 120.01

sorting out and stacking of useful materials and

disposing off the excavated stuff upto All lift and

lead.(A) Loose or soft soil

2 Excavation for foundation for depth from 1.5 m to 6.50 Cumt 166.35

3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto All lift and lead .(B) Dense or Hard soil

3 Filling in foundation and plinth with sand in layers of 2.20 Cumt 471.69

20 cm. Thickness including watering ramming and

consolidating etc. comp.

4 Filling available excavated Earth (Excluding Rock) in 18.30 Cumt 133.65

trench plinth side of foundation . in layer not

excluding 20 cm in depth consolidation each

deposited layer by ramming and watering etc.

5 Filling foundation and plinth with murrum or 2.30 Cumt 296.29

selected soil in layer of 20 cm in thickness including

ramming watering and consolidating etc. complete

6 Applying general insecticide pest control treatment 11.50 Sqmt 51.52

to floors, cupboards etc including labour material etc.

complete. Using Imidacloprid 30.5 SC. As Per

Part -II (0.075% concentration by mass) is

recommended 10.5ml chemical diluted with 5 liters

of water application 0.5 liters chemical/ sqm of

surface is recommended as per I.S.

7 Providing and laying cement concrete 1:3:6 (1- 1.60 Cumt 3080.90

Cement : 3- coarse sand : 6- machine cut stone

aggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and

8 Providing and laying controlled cement concrete 1.30 Cumt 4336.23

M150 for curing complete including cost of

formwork but excluding the cost of reinforcement for

reinforced concrete work in PCC

Item Description of Item Quantity Unit Rate In Amount

9 Providing and laying controlled cement concrete 3.70 Cumt 4566.72

M250 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work for Foundations, Footings

10 Providing and laying controlled cement concrete 1.20 Cumt 7254.12

M250 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work for Column up to GL

11 Providing and laying controlled cement concrete 2.90 Cumt 6154.33

M250 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work for Ground/Plinth Beam

12 Providing and laying controlled cement concrete 1.50 Cumt 5582.17

M200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Plinth Slab

13 Providing and laying controlled cement concrete 2.00 Cumt 7204.77

M200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Column Up to First Floor

14 Providing and laying controlled cement concrete 0.80 Cumt 6114.67

M200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Beams for Up to First

15 Providing and laying controlled cement concrete 0.20 Cumt 6270.87

M200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Chhajja Up to First Floor

16 Providing and laying controlled cement concrete 0.10 Cumt 7403.05

M200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Lintal Up to First Floor

17 Providing and laying controlled cement concrete 0.50 Cumt 6870.61

M200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Slab Up to First Floor

Item Description of Item Quantity Unit Rate In Amount

18 Providing and laying controlled cement concrete 0.40 Cumt 7235.15

M200 and curing complete including the cost of form

work but excluding the cost of reinforcement for

reinforced concrete work in Stair Up to First Floor

19 Providing IS Mark TMT FE-500D bar reinforcement 1539.50 Kg 77.29

for RCC work including bending & placing in position

complete up to All floor Level

20 Brick work using common burnt clay building bricks 0.50 Cumt 4121.55

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand) (B) Conventional below plinth

21 Brick work using common burnt clay building bricks 4.50 Cumt 4403.40

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand) (B) Conventional Up to First

22 Providing 15mm thick cement plaster in single coat 22.30 Sqmt 176.09

on Rough (Similar)side of single or half brick walls

for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand) For Up to First Floor

23 Providing 10mm thick cement plaster in single coat 5.00 Sqmt 130.12

on brick/concrete walls for interior plastering upto

floor two level and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand). Up to First

24 20mm thick sand faced cement plaster on walls upto 30.10 Sqmt 339.15

height 10 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete.

25 Applying two coats of Acrylic lapy (putty) & two 27.30 Sqmt 40.59

coats of primer of approved brand and manufacture

on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

26 Wall painting (two coats) with plastic emulsion paint 22.30 Sqmt 81.05

of approved brand and manufacture on undecorated

wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

Item Description of Item Quantity Unit Rate In Amount

27 Painting (two coats) with plastic emulsion paint of 5.00 Sqmt 86.60

approved brand and manufacture on undecorated

ceiling surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

28 Finishing wall with weather proof exterior emulsion 30.10 Sqmt 117.40

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete

29 Providing and laying broken chine mosaic flooring 4.00 Sqmt 1284.30

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid with 100mm brick bat concrete

over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface

using white cement including rounding off junctions

and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as

directed. and Providing and laying cement concrete

flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded

stone aggregate 20mm nominal size) laid in one

layer and finished with a floating coat of neat cement.

(A) 40mm thick.

30 Providing and fixing 35 mm thick solid core type-I 2.10 Sqmt 5751.75

Single Flush door shuttered having factory made &

stamped I.S 12823 grade-I three layered resin

flushed door having decorative lamination on both

sides & 12 mm thick teak wood beading fixed

around the door including melamine polished at

edges , fixing by Zinc coated hinges for durable grip

including 15cm long stainless steel handle, Aldrop

stopper and necessary Locking system, S.S. fixtures

& fastenings etc. directed by engineer in charge. The

door from “NOVAPAN” OR Equivalent company

holding licence for minimum 5 years.

31 Providing and laying Ceramic tiles 6mm thick in 8.10 Sqmt 994.32

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement.

Item Description of Item Quantity Unit Rate In Amount

32 Providing and fixing mirror polished 18 mm thick 12.60 Sqmt 2277.45

Marble stone with full round edge and polished of

approved quality in clading on sill and around the

doors/ windows/ ventilation with 12 mm thick

cement mortor CM (1:4) and fixing with cement

slurry & adhesive including moulding of exposed

edges as directed by engineering in charge etc.

33 Providing and fixing M.S Safty Grills having 12mm 0.30 Sqmt 2137.97

Solid MS Squre bar Horizontally at every equal

0.10m C/C distance and 2 no of bar Vertically at

every equal 0.375m C/C distance Fixing on around

(5x40) mm Solid MS Patti including cutting, welding

and fabrication etc; including one coat of primer of

approved quality and two coats of oil painting as per

detail drawing etc. complete as per directed Engineer

34 Providing, laying and jointing in true line and level 10.00 Rmt 857.65

110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm diametre

x 149 mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as

directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost

of all materials.

35 Providing and fixing in PVC SWR cowel went 110mm 2.00 No 28.48

dia to pipes.(B) 110mm dia.

36 Providing laying and jointing in true line and level 25.00 Rmt 1126.35

200mm dia. Form core Pipe for drainage including

fittings as approved by Engineer In Charge. Pipe shall

be fixed on existing structure, Wall or ground with

the help of clamp or shall be canceled as directed

including necessary fittings, etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

37 Providing and fixing S.W. gully trap with C.I. grating 1.00 No 1246.92

brick masonry chamber and water tight C.I. cover

with frame of 300mm x 300mm size (inside) with

standard weight (i) Square mouth traps (B) 150mm x

100mm size P or R type

Item Description of Item Quantity Unit Rate In Amount

38 Constructing brick masonry chamber for 1.00 No 3223.11

underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 precast RCC cover 455mm x 610mm

intenal dimensions with frame (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement

on walls and bed concrete etc. complete (i) Inside

dimensions 455mmx 610mm and 450mm deep for

single pipe line.

39 Constructing brick masonry chamber for 1.00 No 3933.85

underground C.I. Inspection C.I. Inspection chamber

and bends with briocks having croshing strength not

less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover

500mmx 700mm intenal dimensions with frame

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed

concrete etc. complete (i) Inside dimensions

500mmx 700mm and 450mm deep for single pipe

40 Providing and fixing in position 150 mm high, 14.00 No 686.80

English letters made from 1.0 mm thick stainless

steel sheet as directed by Engineer in charge with all

necessary tools & plants etc. complete.

41 Providing and fixing 90 cm high Stainless steel railing 11.00 Rmt 3719.83

made from anticorrocive 304 grade S S pipe of

mm dia (16Gauge) as hand rail with S S 304 grade

Baluster of 38 mm dia (16Gauge) as a vertical

support fixed in RCC slab at 1.2m c/c including

three horizontal S S pipes of 25 mm dia (16Gauge) at

eqal distance fixed by 18.75 mm dia (16Gauge) S S

pipe with baluster including accessories as per

detailed drawing as directed etc. complete.

42 Providing and fixing coloured self adhesive PU- 6.00 Sqmt 1354.41

Tactile tile, ground surface indicators of

Polyurethane) of size 300mm x 300mm for

guiding/warning to the visually visitors in the

centre/side of the pedestrian/approach pathway as

per specification and guidelines complete in all

respect to the entire satisfaction of in charge.

Item Description of Item Quantity Unit Rate In Amount

43 Providing laying and jointing in true line and level 15.00 Rmt 91.84

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

44 Providing laying and jointing in true line and level 15.00 Rmt 72.65

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

45 Providing and fixing pillar tap, capstan head, screw 2.00 Nos 308.73

down high pressure with screws, shanks and back

nuts. (i) 15mm dia.

46 Providing and fixing screw down bib taps of 3.00 Nos 186.83

following size.(B) Brass chromium plated screws

down Bib Tap. (i) 15mm dia.

47 Providing and fixing pillar Cock, capstan head, screw 2.00 Nos 663.57

down high pressure with screws, shanks and back

nuts. (i) 15mm dia.

48 Providing and fixing screw down bib Cock of 2.00 Nos 439.35

following size.(A) Brass screw down bib cock

polished bright. (i) 20mm dia.

49 Providing and laying coloured glazed tiles of the size 14.70 Sqmt 1477.25

mm in skirting, risers of steps and dedo on 10 mm.

thick cement plaster 1:3 (1 cement : 3 coarse sand) &

jointed with white cement slurry.

50 Providing and fixing washbasin with single hole for 1.00 Nos 1619.87

pillar tap with C.I. or M.S. brackets painted white

including Rubber plug, sutting holes and making

good the same but excluding fittings and also

including rate of C.P. brass waste for washbasin or

sink (A) 32mm dia. and M.I. fisher union for

washbasin or sink. (A) 32mm dia.; (A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

Item Description of Item Quantity Unit Rate In Amount

51 Providing and fixing wash down water closet 1.00 Nos 2983.54

(European type W C pan) with integral P and S trap

including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement five sand) including providing

and fixing plastic seat cover for wash down WC with

CP brass hinges and rubber buffers back plastic seat

and including providing and fixing PVC flushing tank

with a pair of C I or MS bracket with complete fitting

such as lead valve siphon 15 mm dia brass ball valve

with polythene float CP brass handle unions and

couplings for connection with inlet out let and over

flow pipes 40 mm dia porcelain enameled flush bend

including cutting holes in walls and making good the

same connection the flush bend with cistern and

closet vitreous china. {Hindustan, Cera, Parryware or

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in

figures and words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

1 Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

4 items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the

Deputy Executive Engineer Executive Engineer

Navsari ( R & B ) Sub Division Navsari ( R & B ) Division

Navsari Navsari