Repairing of electric wiring, switches, holders, Power Supply system, digging and laying of underground cables, street lights, LP finials etc in R-substation inside factory area bldgs., at O. F. Bhandara.

Amount

S&F of modular switch one way 10 Amp, 1 module,make - Cona/ Legrad/ C&S/ Havells/ Anchor or euivalent

S&F of modular switch one way 16 Amp, 1 module,make - Cona/ Legrad/ C&S/ Havells/ Anchor or euivalent

S&F of modular socket, multi purpose 3 pin 6/16 amp combined controlled by one switch 16 Amp make - Cona/ Legrad/ C&S/ Havells/ Anchor or euivalent

S&F of modular Bell push 6 Amp, 1 module,make - Cona/ Legrad/ C&S/ Havells/ Anchor or euivalent

S&F of modular socket, 2/3 or combine 2&3 pin , 6 Amp, make - Cona/ Legrad/ C&S/ Havells/ Anchor or euivalent ( as per directed by EIC)

S&F of Bell push, flush type, 5 Amp, Anchor/ Cona/ Havells / Legrand make or equivalent make

S &F of Switch piano flush button single pole one way , 5 Amp, Anchor/Cona/Havells/ Legrand make or equivalent make

S & F of socket outlet 2 in 1, 5 pin, flush type, 5 Amp, Anchor/Cona/Havells/ Legrand make or equivalent make

S & F of socket outlet 2 in 1, 3 pin, flush type, 15 Amp, Anchor/Cona/Havells/ Legrand make or equivalent make

S&F of switch socket combination 3 pin, flush type, 5 Amp, Anchor/Cona/Havells/ Legrand make or equivalent make

S & F of switch socket combination 2 in 1, 3 pin, 5 and 15 Amp,flush type universal, Anchor/Cona/Havells/ Legrand make or equivalent make

S&F of fixing back with due repair PVC/ Poly carbonate type angle/ pendent type lamp holder. Anchor/ Cona/ Havells / Legrand make or equivalent make

S&F ceiling rose,2/3 point /PVC/ Polycarbonate, isolated body Anchor/Cona/Havells/ Legrand make or equivalent make

S &F of Bell / buzzer/ Ding dong etc., AC 230 Volts

Fixing or hanging of repaired ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan

Fixing of Exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan

S & F of Air termination , single point aluminium rod 12mm Dia, 300 mm Long

S&F Aluminium strip 25 *3.15 mm with saddles and fixing screws etc. for roof conductors and down condutors above ground for lighting conductors.

S&F of Earth continuity conductor, 25*4 mm G.I strip on wall /recess/ chases/ buried in ground /drawn in conduit or pipe etc as directed by EIC.

S&F of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 32 *6mm galvanised iron strip

Taking down carefully copper / alluminium point wiring (Light, Fan,Socket or power) complete, (fitting suchas switches, ceiling roses, pendants, regulators, sockets etc to be measured separatly )removing materials to store for keeping in safe custody for re use at site and making good disturbed surfaces of walls, floors etc.

Taking down carefully by unscrewing from boards/ out let boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brakets, ceiling fittings , Bulk head fittings , tube light fittings and fan regulators etc. for re use at site or carrying to the store(to be measured only when found serciable in all respects complete for re use)

M&L Point wiring for one light point or one fan point controlled by one switch with 2.5 sq. mm copper conductor, 660 V, FR PVC insulated cable, Polycab / Finolex /HPL/ V-Guard make or equivalent make in PVC conduit with 1.5 sq. mm size FR PVC insulated earth conductors & accessories

M&L Point wiring for one light point or one fan point controlled by one switch with 1.5 sq. mm copper conductor, 660 V, FR PVC insulated cable, Polycab / Finolex /HPL/ V-Guard make or equivalent make in PVC conduit with 1.5 sq. mm size FR PVC insulated earth conductors & accessories

M&L for one 3 pin socket outlet, 5 Amps on the same switch board with other swithes, with cable 1.5 sq.mm size, Polycab / Finolex /HPL/ V-Guard make or equivalent make

M&L for one 3 pin socket outlet, 5 Amps independent, with cable 1.5 sq.mm size, Polycab / Finolex /HPL/ V-Guard make or equivalent make in PVC conduit with 1.0 sq.mm copper FR PVC insulated earth conductor & accessories

M&L Point for one 3 pin socket outlet , 15 Amps,independent, with cables 4.0 sq. mm size FR PVC insulated copper conductors, Polycab / Finolex /HPL/ V-Guard make or equivalent make in PVC conduit with 1.5 sq. mm size FR PVC insulated earth conductors & accessories

M&L Point for wiring for circuit / submain wiring alongwith earthwire with the 2 * 1.5 sq. mm +1*1.5 sq. mm earth wire of FR PVC insulated copper conductor, Polycab / Finolex /HPL/ V-Guard make or equivalent make, single core cable in surface / recessed as required in PVC conduit.

M&L Point for wiring for circuit / submain wiring alongwith earthwire with the 2 * 2.5 sq. mm +1*1.5 sq. mm earth wire of FR PVC insulated copper conductor, Polycab / Finolex /HPL/ V-Guard make or equivalent make, single core cable in surface / recessed and in PVC conduit.

M&L Point for wiring for circuit / submain wiring alongwith earthwire with the 2 * 4.0 sq. mm +1*1.5 sq. mm earth wire of FR PVC insulated copper conductor, Polycab / Finolex /HPL/ V-Guard make or equivalent make, single core cable in surface / recessed and in PVC conduit.

Cutting chases for concealed conduit wiring in wall and making good surface

M & L for earthing complete with gaivanised steel earth plate electrode 60*60cm *6.3mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised strip 32*6 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel including upto 7.5 mtr length/ test point as per IS:3043/ 1987and SSR-2020 plate no.3 & indicated including testing on completion and directed by EIC

Add to item 03006 for each additional 1.5 mtr or part thereof in depth beyond the first 1.5 m

Excavation in hard dense soil 1.5 mtr wide & 2.5 mtr deep for earth pits

Supply & fixing of GI Pipe medium grade 25 mm Dia with GI nuts & bolts ,2 nos of clamp ,funnel etc as watering pipe in earth pits and as directed by EIC.

Material and labour for PCC of 1:2:4 of type B-2 using 40 mm graded aggregate for making foundation of LP finial/ steel tubular swaged pole.

Stop, commas, short line dashes , hypens, brakets, etc

Painting of steel & iron surface (electrical appratus like street light DBs, HT/LT Panels,Feeder Pillars, Transformer etc.) by preparing old painted surface and one coat of synthetic enamel light grey/ smoke grey/ siemens grey colour ( whenever required painting shall be done through applying suitable painting & brush / spray painting or as directed by EIC.

writing letters or figures (block , roman/ italic or indian) not exceeding 10 cm height.

Rough excavation in trenches not execeeding 1.5 wide and not exceeding 1.5m in depth in hard dense soil and getting out for laying of cable.

Back filling of excavated soil spreading, leveling & well raming in layers.

M&L for fine sand filling in cable trench.

M&L for reinforced precast concrete cable covers ,class LV, Type 1, flat, size 250X150X40 mm.

Supply and fixing of GI pipe medium grade 80mm dia under road/culvert etc.

Supply & Fixing of supports/ clamps of MS angle 50 x 50 x 6 mm size and back/top plates (size: 50 x 50 x 6 mm) fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of oil paints.

M & L for 9 mtr long steel tubulers swaged poles complete with cast iron based plate, final taper plug, bolts,nuts & screws as per specified type 410 SP -31 including Aluminium painting, digging and refilling with concrete for grouting and as directed by EIC.

M&L cast iron pressed steel terminal boxes 60 mm deep size 100mm *100mm rectangular for mounting, switches, sockets, fan regulator etc with 3mm thick pastic laminared sheet cover not exceeding the size 100 *100mm

M&L cast iron pressed steel terminal boxes 60 mm deep size 100mm *175mm rectangular for mounting, switches, sockets, fan regulator etc with 3mm thick pastic laminared sheet cover not exceeding the size 100 *175mm

M&L cast iron pressed steel terminal boxes 60 mm deep size 150mm *200mm rectangular for mounting, switches, sockets, fan regulator etc with 3mm thick pastic laminared sheet cover not exceeding the size 150 *200mm

M&L cast iron pressed steel terminal boxes 60 mm deep size 250mm *300mm rectangular for mounting, switches, sockets, fan regulator etc with 3mm thick pastic laminated sheet cover not exceeding the size 250 *300mm

M&L cast iron pressed steel terminal boxes 60 mm deep size 150mm *150mm rectangular for mounting, switches, sockets, fan regulator etc with 3mm thick pastic laminared sheet cover not exceeding the size 150 *150mm

Supply & fixing only teak wood / summica board in closed recessed size 15*10cm*4mm

Supply & fixing only teak wood / summica board in closed recessed size 20*15cm*4mm

Supply & fixing only teak wood / summica board in closed recessed size 10*10cm*4mm

Supply & fixing only teak wood / summica board in closed recessed size 20*25cm*4mm

M&L for Hi- Lamp sheet in closed recessed, size 10 *10cm *4mm

M&L for Hi- Lamp sheet in closed recessed, size 15 *10cm *5mm

M&L for Hi- Lamp sheet in closed recessed, size 20 *15cm *4mm

M& L for round block 10 cm dia and 5 cm depth 0r eqivalent

fixing back in due repairs to switch unit / switch fuse unit (DP/TPN fused and neutral link), any voltage, any amper

fixing back with due repairs replacement of bulb / CFL/T-5/ LED lamp, LED Tube light only (Material will be provided by factory)

Repairing & fixing back of Flameproof & weatherproof rotary type switch/ switch socket combination 16 A, 250 V, Double pole of any make or as per directed by EIC( Material will be provided by Ofba)

Fixing only for Flameproof junction box, up to 100 /120 mm dia 2/4 way ( material will be provided by Ofba)

fixing for single/double compressor gland FLP/NON FLP size 19/25 mm dia

Repairing / replacement of LED / CFL Lamp of FLP /WP Well glass/ bulk head fittings or as per directed by EIC (material will be provided by O.F. Bhandara)

Repairing / replacement of FLP /WP Well tube light fittings by replacing LED Tube provided by O.F. Bhandara at various location as directed by EIC.

Removing & fixing back with due repairs HPSV /HPMV/MH/FTL/LED street light fitting/ Search light of any rating including replacement of LED Panel, driver etc of any wattage rating ((material will be provided by O.F. Bhandara)

Taking down tube light fitting FLP (1*40 W) for repairing

Repairing of FTL fitting FLP(1*40 W) by replacing tube, electronic choke, rotor holder etc.

fixing back FTL tube light fitting FLP (1*40 W) for repairing

Fixing only Well glass /Flood Light fitting 1* 35 watt , FLP-WP, as per directed by EIC

M & L for fixing sheet metal enclosure DB for MCBs SPN 2 way, single phase and neutral . Make- HP/Havells/ L&T or its equivalent

M & L for fixing sheet metal enclosure DB for MCBs 4 way, 415 Volt, 200A bus bar , tripple pole and neutral, Double door . Make- HP/Havells/ L&T or its equivalent

Supply & fixing outdoor type distribution box made out of CRCA sheet metal 2 mm thick on pole 415 V consisting of 1 nos. of 63 A connector and one no. of 6A MCB SPN with bottom cable plate drilled, danger sticker 415 V and fixed with rubber gourments.The DB cover will have lockable arrangements. The DB should be of size 300X300X150 mm, 2 Nos. of GI clamp of 25X5 mm dully painted to be provided to fixed the DB on pole.

supply & fixing of straight through heat shrinkable cable jointing kit for 10 sq.mm to 25 sq. mm XLPE LT cable 4 core, make- REPL,Raychem RPG/3-M or equivalent

supply & fixing of straight through heat shrinkable cable jointing kit for 95 sq.mm to 400 sq. mm XLPE LT cable 3.5 core, make- REPL,Raychem RPG/3-M or equivalent

supply & fixing of straight through heat shrinkable cable jointing kit for 35 sq.mm to 70 sq. mm XLPE LT cable 4 core, make- REPL,Raychem RPG/3-M or equivalent

Shifting & Laying in cable trench /fixing by means G.I saddle of LT cable sizes from 1.5 sq. mm to 25 sq. mm ( cable will be provided by O.F. Bhandara)

Shifting & Laying in cable trench /fixing by means G.I saddle of LT cable sizes from 35 sq. mm to 400 sq. mm ( cable will be provided by O.F. Bhandara)

Maintenance and testing of LT Air circuit breakers in Sub station ( Range 630 A to 2000A)

S& F of open type PVC Modular plate with PVC surface frame 18 module make - Cona/ Legrad/ C&S/ Havells/ Anchor or euivalent (as per directed by EIC)

S& F of open type PVC Modular plate with PVC surface frame 12 module make - Cona/ Legrad/ C&S/ Havells/ Anchor or euivalent (as per directed by EIC)

S& F of open type PVC Modular plate with PVC surface frame 8 module,make - Cona/ Legrad/ C&S/ Havells/ Anchor or euivalent (as per directed by EIC)

S& F of G.I Pipe medium grade 25 mm dia with GI nuts & bolts, 2 nos clamp and 1.5 mtr,bent to shape as per required for bracket of street light / perimeter light (as per directed by EIC)

S & F of FRP/ DMC conical insulator M6*30 HT, rated volt 440V, test volt 2KV for 1 min, size base diameter 30mm, height not less than 60 mm from base, top face diameter not less than 20 mm, effective threaded length not less than 8 to 10 mm with brass / stainless steel nut, bolt & washer.(fixing of insulator as directed by EIC)

S & F of FRP/ DMC conical insulator M12*60 HT, rated volt 440V, test volt 2KV for 1 min, size base diameter 60mm, height not less than 60 mm from base, top face diameter not less than 40 mm, effective threaded length not less than 16 to 19 mm with brass / stainless steel nut, bolt & washer.(fixing of insulator as directed by EIC)

S & F of Light bulk head industrial type totally enclosed suitable for 9 -14 watt LED Lamp, B-22 Cap with clear glass & 19 mm incoming gland provision for cable entry make: bjaj/ Surya or equivalent

S & F of Bombay nail 100 mm length as directed by EIC/SIC

Swati Enterprises

M B ELECTRICALS

RAJESH ELECTRICAL CONSTRUCTION