PROVISION OF ADDITIONAL / ALTERATION OF DATA CENTRE BUILDING NO P-82 AT HQ SASE MANALI

Amount

Cutting holes in stone walls exceeding half bricks and not exc one brick for inserting hold fasts etc built in cement mortar complete all as specified and as directed by Engineer-in-Charge.

Supply and fix pressed steel frame for doors one or more rebates including necessary fixing lugs, hinges, lock strike plate of size 105x60 mm complete all as specified and as directed by Engineer-in-Charge.

Material and labour PCC 1:2:4 type B0 as in filling around hold fast, filling in press steel chokats complete all as specified and as directed by Engineer-in-Charge.

Material and labour 35 mm thick glazed and skeleton shutter of 2nd class hard wood open rebated and prepare to receive glass, gauged etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix aluminium tower bolts of excruded sextion 200 mm long complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 300 mm long aluminium alloy, anodized sliding door bolts with hasp & staple complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Butt hinges 100 mm size mild steel medium weight complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Butt hinges 50 mm size mild steel medium weight complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 300 mm long mild steel ordinary rat tail rod pattern spring incl roller & roller plate complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 150 mm long aluminium handle cast type anodized complete all as specified and as directed by Engineer-in-Charge.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.4mm & fixed with SS wire staples complete all as specified and as directed by Engineer-in-Charge.

Supply and fix small fitting such as brackets of any type, hinges block etc not exc 200 cucm of first class hard wood complete all as specified and as directed by Engineer-in-Charge.

Material and labour plain fillets square, rectangular or triangular in section clean sawn of IInd class hard wood of section exc 6 & not exc 13 sqcm and fixed with nails etc complete all as specified and as directed by Engineer-in-Charge.

Prepration of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint or a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.

All as per Srl item No. 14 here-in-before but not exc 10 cm width or girth complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 0.63 mm thick galvanized mild steel sheeting as in straight flashing fixed to wall incl all necessary screws wooden plugs at any height complete all as specified and as directed by Engineer-in-Charge.

Rough excavation not exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and as directed by Engineer-in-Charge.

Material and labour hard core of broken bricks of gauge not exc 63 mm, deposited spread & levelled in layers not exc 15 cm thick complete all as specified and as directed by Engineer-in-Charge.

Material and labour PCC 1:2:4 type B2 100 mm thick as in floor complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 20 mm thick Iind class hard wood boarding fixed with nails planned one side with butt joint as in facia etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix plain solid straight chokats or frames of IInd class hard wood rounded or chamfered complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 18 mm thick pre laminated partical boards pre laminated one side with decorative choice lamintion and other side balancing white lamination fixed with screw to timber frame work complete all as specified and as directed by Engineer-in-Charge.

Supply and fix continous hinges mild steel bright finish 30 mm size complete all as specified and as directed by Engineer-in-Charge.

Supply and fix aluminium handles cast type anodized 100 mm size complete all as specified and as directed by Engineer-in-Charge.

Material and labour 50 mm dia , polished hard wood knobs fixed with screws complete all as specified and as directed by Engineer-in-Charge.

Dismantling wall & ceiling boards incl cover fillets complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 12 mm thick perforated particle board for insulation and accostic purpose 60x60 cm in size fixed with nails to timber frame work as in ceiling complete all as specified and as directed by Engineer-in-Charge.

Material and labour prepration of old decorated plastered surfaces of walls and applying two coats of distamper oil emulsion complete all as specified and as directed by Engineer-in-Charge.

All as per Srl Item No 28 here-in-before but on ceiling complete all as specified and as directed by Engineer-in-Charge.

Material and labour prepration of old decorated plastered surfaces of walls and applying two coats of exterior grade emulsion (Apex Ultima or equivalent) complete all as specified and as directed by Engineer-in-Charge.

Excavating in post holes not exc 0.5 Cum each and getting out in loose/ soft soil including RFR in layers not exc 25 cm complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material exceeding 50 mtr and not exceeding 100 mtr as in soil complete all as specified and as directed by Engineer-in-Charge.

Material and labour PCC 1:2:4 type B2 as in foundation & mass concrete complete all as specified and as directed by Engineer-in-Charge.

Supply and fix rolled mild steel compound girder and stanchions, staging for water tanks and like with channel, angle, plate etc confirming to FE-410W grade E-250 complete all as specified and as directed by Engineer-in-Charge.

Material and labour prepration of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint or a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connection 20 mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and fix tube medium grade with all fitting fixed to wall, ceiling or laid in floor 25 mm bore complete all as specified and as directed by Engineer-in-Charge.

All as per Srl Item No 37 here-in-before but 20 mm bore of pipe complete all as specified and as directed by Engineer-in-Charge.

Dismantling water tank 500 ltr capacity and removing to store complete all as specified and as directed by Engineer-in-Charge.

Supply and fix rotational moulded polythlene water storage tank (vertical type) hosted & fixed 1000 ltr capacity complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Gun metal globe or gate valve with iron wheel head screwed both end for iron pipe 25 mm complete all as specified and as directed by Engineer-in-Charge.

All as per Srl Item No 41 here-in-before but 20 mm ditto complete all as specified and as directed by Engineer-in-Charge.

Supply and fix ball valve high pressure with polythlene float & flynut for iron pipe 20 mm bore complete all as specified and as directed by Engineer-in-Charge.

Dismantling & refixing plain or corrugated steel sheeting any gauge , thickness as in roofing complete all as specified and as directed by Engineer-in-Charge.

Material and labour prepration of old decorated surfaces of steel and applying two coats of synthatic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Material and labour for ventilation fan of size, 300mm sweep metallic range. 4 Nos of Blades Double ball bearings, heavy duty motor with protective steel bird guard Robust construction complete all as specified and directed by Enginners-In-Charge . Make Havells Model No Ventilair DB Grey FHVVEMTDBB12 or of equivalent as specified

Material and labour for point wiring with 1.5 sq.mm size(nominal area), two single core 1100V grade PVC insulated and unsheathed 1.5 Sq mm standard copper conductor in and incl PVC casing caping of adequated size with all fillings and accessories incl PVC board with tap cover for housing/mounting bracket switches/socket etc. incl PVC insulated unsheathed single core multi stranded copper conductor cable of size 1.5 sq.mm green in colour as earth continuity conductor connected to common earth for one light point controlled by one way switch completed all as specified and directed by Engineer-in-Charge.

Supply and fix switch piano flush button type 5 Amps single pole one way, complete all as specified and directed by Engineer-in-Charge.MAKE: - ANCHOR/ PLAZA/ SSK

Supply and fix ceiling rose, surface bakelite 65x50 mm three terminal. ISI Mark. complete all as specified and directed by Engineer-in-Charge.MAKE: - ANCHOR/ PLAZA/ ESS KAY/KINJAL

NATHU RAM AND SONS

Kalap Engineers and Builders