19 /EE/PMD/PHED OF 2024-2025/SL1

Amount

Part-A Earthwork in excavation of foundation trenches or drain in all sorts of soil (including mixed soil but exculding laterite or sand stone) including removing spreading or stacking the spoils, within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and removing the bottom, bailing out water as required complete. a) Depth of excavation not exceeding 1500 mm (For 5 Nos. of OHR sites)

Filling in foundation or plinth by sand(fine) in layers not exceeding 150mm as directed and consolidating the same by thorough saturation with water ramming complete including the cost of supply of sand. (Payment will be made on measurement of finished quantity) (For 5 Nos. of OHR sites)

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. (For 5 Nos. of OHR sites)

Ordinary cement concrete M-15(mix 4:2:1) with graded stone chips (20 mm down) excluding shuttering & reinforcement, if any, in ground floor as per IS-456-2000. a) Hura variety. (lead upto 40 KM) (For 5 Nos. of OHR sites)

Ordinary cement concrete (Mix 3:1/2:1) M-20 with graded stone chips (20 mm down) excluding shuttering & reinforcement a) Hura Variety (Lead Upto 40 KM) (For 5 Nos. of OHR sites)

Hire & labour charges for shuttering with centering & necessary staging upto 4 mtr using using approved stout props & thick hard wood planks of approved thickness with required bracings for concrete slabs, beams, column, liulop curved or straight including fitting fixing & striking out after completion of works. a) 25 mm to 30 mm shuttering without staging in foundation (For 5 Nos. of OHR sites)

b) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. (For 5 Nos. of OHR sites)

Reinforcement for reinforce concrete in all sorts of structures including distribution bars, stirrups, binders etc including supply of rods, initial straightening & removal of loose rust (if necessary), cutting to requisite length, hooking & bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing & direction. i) Other Manufacturer not specified (For 5 Nos. of OHR sites)

125 mm. thick Flyash brick work as per IS 12894:2002 in cement mortar (1:4) in ground floor. (For 5 Nos. of OHR sites)

250 mm thick Brick work with Fly Ash Bricks(250mmx125mmx75mm) as per IS 12894:2002 in cement mortar (1:4) a) In foundation and plinth (For 5 Nos. of OHR sites)

(b) In superstructure, ground floor

Earthwork in filling in foundation trenches or plinth with good earth in layer not exceeding 150 mm including watering and ramming etc layer by layer complete. (payment to be made on basis of measurement of finished work) a) with earth obtained for excavation of foundation. (For 5 Nos. of OHR sites)

(c) (i) With carried earth arranged by the contractor within a radius of 1 km. including cost of carried earth (For 5 Nos. of OHR sites)

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement In ground floor. (as necessary) and marble 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). (ii) 25 mm. thick (For 5 Nos. of OHR sites)

a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. (For 5 Nos. of OHR sites)

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket , handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. For structural members of specified sections weighing less than 22.5 Kg./m (For 5 Nos. of OHR sites)

Supplying fitting approved type ventilator in position after cutting holes in walls setting in cement mortar mending damages to wall and plaster and two coats of paint of approved brand of any shade. Payment of mending good damages of wall & plaster and painting to be made separately. (b) R.C.C ventilator of 20 mm. thick (i) Upto 0.10 sq.m. area

Plaster (to wall, floor, ceiling etc) with sand and cement mortar including rounding of champhering corners as directed and racking out joints or roughening of cement surface, including throating, nosing and drip course (where necessary(ground floor) ii) With 1:4 cement mortar (c) 10 mm thick plaster (For 5 Nos. of OHR sites)

(i) With 1:6 cement mortara) 20 mm thick plaster (For 5 Nos. of OHR sites)

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. (For 5 Nos. of OHR sites)

Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling] Red Variety (i) 25 mm. thick (For 5 Nos. of OHR sites)

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.(In Ground Floor) (a) One Coat (For 5 Nos. of OHR sites)

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats (For 5 Nos. of OHR sites)

Protective and Decorative Acrylic exterior emulsion paint of approved quality as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In ground Floor, (Two coat),a) Normal Acrylic Emulsion (For 5 Nos. of OHR sites)

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (For 5 Nos. of OHR sites)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface :With other than hi-gloss of approved quality- i) Two coats (with any shade except white) (For 5 Nos. of OHR sites)

Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5mm (± 0.2 mm) made out of single piece extruded PVC profile, with mitred cut joint sand joint with 2 nos. of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 mm x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The doorframe to be fixed to the wall using 8 x100mm long anchor fasteners complete, all as per manufacturer‟s specification and direction of Engineer -in- charge (For 5 Nos. of OHR sites)

Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In ground floor.

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. (For 5 Nos. of OHR sites) A) UPVC Pipes: (ii) 110 mm. Dia.

c) Bend 87.5 degree (ii) 110 mm. Dia.

d) Shoe (ii) 110 mm. Dia.

Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. For 10 users A) With Pakur variety. (SW/JSPL/SHYAM/SRMB/BMASL/ELEC TROSTEEL/SSL (For 5 Nos. of OHR sites)

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. For- (JSW/JSPL/SHYAM/SRMB/BMASL/E LECTROSTEEL/SSL (For 5 Nos. of OHR sites)

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. With Pakur variety. With Pakur variety.(JSW/JSPL/SHYAM/SRMB/B MASL/l/ELECTROSSTEEL/SSL) (For 5 Nos. of OHR sites)

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (ii) 530 mm X 410 mm (For 5 Nos. of OHR sites)

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. (For 5 Nos. of OHR sites)

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (i) 450 mm X 300 mm size (For 5 Nos. of OHR sites)

Supplying, fitting and fixing shower of approved brand and make. (a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). (For 5 Nos. of OHR sites)

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer 1000 litre capacity (For 5 Nos. of OHR sites)

Labour for punching hole in plastic water storage tank upto 50 mm dia. (For 5 Nos. of OHR sites)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (b) 25 mm Dia (For 5 Nos. of OHR sites)

Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe (For 5 Nos. of OHR sites)

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (i) 450 mm X 300 mm (For 5 Nos. of OHR sites)

Supplying, fitting and fixing soap holder. (a) PTMT (Prayag or equivalent) (For 5 Nos. of OHR sites)

Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). (For 5 Nos. of OHR sites)

(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar. (For 5 Nos. of OHR sites)

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (For 5 Nos. of OHR sites) (a) For Exposed Work PVC Pipes (Dia) 20 mm

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (B) Fittings xxi) 110 X 110 P Trap (For 5 Nos. of OHR sites)

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm (For 5 Nos. of OHR sites)

Supplying, fitting and fixing urinal flush pipe fittings of approved brand. (a) C.P. urinal flush pipe fittings range of one (For 5 Nos. of OHR sites)

Part-B Supplying and fixing of 6 way double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (For 5 Nos. of OHR sites)

Supplying and fixing of 6 A SP MCB ,240/415 V Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection . Make : Havells /PHE Approved . ( a ) 10 Amp. SP MCB (For 5 Nos. of OHR sites)

( b ) 20Amp. DP MCB (For 5 Nos. of OHR sites)

Distribution wiring in 11 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl necy. fittings as required . ( a ) 2 x 36/0.3 (2.5 sqmni)+ 1 x22/0.3 (1.5 sqmm) ECC (For 5 Nos. of OHR sites)

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit FR (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC, to light/Fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum IB on wall complete with 2 no suitable size Ph & N" copper bar incl bakelite/Perspex (wall matching color) top cover 3 mm thick and incl 175mmx100mmx65mm inspection box. making earthing attachment, painting the MS box and mending good the damages to original finish . a) Average run 6 mtr. (For 5 Nos. of OHR sites)

b) On board plug point . (For 5 Nos. of OHR sites)

Supply and fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastenerof Tube light luminaireSlim 22 Watt LED batten with polycarbonate housing and diffuser is an ideal replacement solution for existing battens/fluorescent lamps with elegantly designed end caps. (For 5 Nos. of OHR sites)

Supplying & Fixing bulk head light fitting with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8W LED lamp complete set. (For 5 Nos. of OHR sites)

Supply and delivery of 300 mm sweep size metal body exhaust fan of 1400 RPM , 90 KW , Single phase ,Rigid frame with rubber mountings for silent operation .Corrosion resistant body, minimal noise operation & maintenance free design . Make : PHE approved make . (For 5 Nos. of OHR sites)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:( a ) 300 mm sweep size . (For 5 Nos. of OHR sites)

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) (For 5 Nos. of OHR sites)

Supply of Ceiling fan 3blade,230v,50hz, 1200mm swip, 50 watt vibration free operation. Make - PHE approved make . (For 5 Nos. of OHR sites)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. (For 5 Nos. of OHR sites)

Supply and delivery of metallic Rack ( Size : 2m( L ) X 0.9 m ( W ) x 0.4 m ( T ) and rack step 0.45 m making with perforated angle and sheet and primer painting finish .

Add GST @ 18%

Add CESS @ 1%

MS D.PALIT AND CO. (BID ID -6479945)

KOUSHIK CHATTERJEE (BID ID -6480086)