REPAIRS OF BOUNDARY WALL, FENCING, PATHS AND OTHER MISC BR WORKS AT LL BARODA

Amount

Dismantling posts/struts (wood, steel or RCC) any section including taking out embedded portion from concrete/brick masonry etc and making good disturbed ground complete.

Demolition of brick/ stone masonry work built in cement mortor complete.

Demolition of cement concrete as in ground floor & paving n.exc 15cm thick (below or above ground level) complete.

Dismantaling of wire mesh fencing of any type etc. Complete.

Surface excavation n. exc.30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete.

Excavation in treaches n exc 1.50m wide and n. exc 1.50m in depth for foundation etc n. exc 10 Sqm on plan and getting out in soft/loose soil complete.

Returning filling in including spreading levelling and well ramming in soft/loose soil complete

Removing excavated materials n exc 50 mtrs and deposited where directed at a level n exc 50 mtr where directed n exc 1.50 m above the starting point complete.

Excavating in post holes in soft and loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete.

M&L Hard core of with borken brick boulders n exc 63 mm, deposited, spread and levelled in layer n exc 15 cm thick, watered and rammed to a true surface complete.

M&L PCC 1:3:6, type C2 using 40mm gd stone aggs as in fdn filling and mass concrete complete

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in lintels up to 1.5 m clear span, cills, coping, benching, bed plates/ blocks for hold fasts etc including necessary use & waste of form work complete

S&F in repairs Pre cast facory made kerb stone of plain cement concrete (PCC) 1:2:4 Type B1 matching with existing kerb stone shape and size & set in CM 1:4 etc complete

M&L in repairs Precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates as in drain cover slabs and set in cm 1:6 complete.

M&L PCC 1:2:4 type B2 (Using 40 mm graded aggregate) as in fdn filling and mass concrete complete

M&L plain cement concrete (PCC) type B1, 1:2:4 using 20mm graded stone agg as in Surface channels & drains etc complete.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred / stopped ends etc complete.

M&L brick work with sub class B bricks built in CM 1:6 straight or curved exceeding 6m mean radius complete.

S&F mild steel work as in posts and strut in fencing including cutting cutting tops to shape as directed drilling holes notching for wire etc complete.

S&F MS TMT bars 10 mm dia and over for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete.

Supply only ms in flat, round or square bars in available length confirming to Fe-410-W(Gde-E-250) complete,

S&F mild steel screw bolts (machine made) with hexogonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexogonal or square nut 5 to 10 mm dia and n. exc. 5 cm long complete

Supply only chian link mild steel galvanised fencing with 4mm dia, weight not exe 3kg per Sqm made upto mattresses with mesh of size 50 x 50mm as approved etc. Complete.

Fixing only steel chain link fencing incl line wire any mesh, size and type to ant type of any standards, rails, steel bars straining bolts etc incl provn of binding wire complete

M&L Plain Cement concrete (PCC) 1:4:8 type D2 using 40mm graded agg 75 mm thick as in sub base of floor etc complete

M&L 80 mm thick coloured with grey cement and pigment, Machine pressed rubber moulded (comprising of red & yelow colour) interlocking pavers block any shape and size confirming to IS 15658-2006 M-40 Grade in approved design/colour set & laid over 25 mm thick coarse sand etc. complete

M&L 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete.

M&L preparation of steel surfaces of any description not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete.

M&L Reinforced cement concrete pipes, class NP2 of size 300 mm laid and jointed with collars complete.

Aditya Construction