Provision of three bus shelters in Dehradun Cantt for the Year 2025-26

Providing Stainless Steel (ASTM 304) bus shelters 6.00 x 2.20m (The size may increase or dicrease as per the site)with seating arrangements using stainless steel flats, sheets, pipes, mild steel, polycarbonate sheet, acrylic sheet and all accessories including all cost for the following Technical specifications:- · Vertical post -150mm OD 3.15mm thick - 3mtr Length x 2post = 6m · main horizontal Member -150mm OD 3.15mm thick - 6.00 m length x 1 post = 6m · profile for roof member-Leaser -8mm thick sheet (Laser cut) - Area of one 8 x 4 Sheet is 3.125s · Cut Front and Back - cut to profile - 18 x 4 sheet will give 8 Nos for 7 profile will be 2.75 SQM · Strip for Making T section -6m thick sheet (laser cut) cut to slots - 06 x 2 x 8 SQM · Strip for Holding Roof Sheet - 2mm thick sheet laser cut- 06 x 2 x 8 SQM · profile for Roof end flash-laser cut - 3mm thick sheet (laser cut) cut to profile – WT/SQM for 3mm sheet is 24 KGS · Front Flashing - 400mm width 1.0mm thick folded section - WT/SQM for 1mm sheet is 8 KGS · Front Sheet strip for frame - 400mm x 60mm 6mm thick flat- WT/SQM for 6mm sheet is 48 KGS · Front and Back Roof Support - 50 x 50 x 6mm thick angle laser cut - WT/SQM for 6mm sheet is 48 KGS · Front and Back Roof Support · Bracket - Fabricated out of 6mm sheet - Machined component · Back rest pipe - 100mm OD 1.6mm thick · seating Bracket (laser cut) - 114mm OD 3mm thick 32 · seat rest - 6mm thick profile laser cut - 200mm x 600mm 6mm thick 7 Nos · seat Rest-Support pipes - 50 dia 3mm thick - 4.6 Rm x 3 Nos · Vertical & Horizontal post Dummies - 150mm OD 10mm thick flange - 4.6Rm x 2 Nos · Fixer for joining seating pipe to vertical - 75mm od x SS Rod · Route Board - 1.63 thick SS sheet · frame for Advt Board - 125mm x 75mm x 2mm thick · Outer frame for fixing Acrylic Sheet - 50 x 50 x 3mm thick angle · Fixtures+ Nuts and Bolts - lump sum · Roof sheet - multiwated polycarbonate sheet - 6mm · Acrylic Sheet for Signage - 5mm thick acrylic sheet. Stainless prefabricated steel benches, Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with white cement complete at all level as specified and directed. (A) Ceramic. i)Normal range (Sizes 300 mm x 300mm and above) Dismantling of existing old structures, excavation/demolition of area with disposal of spoil, removal of kiosks and display boards and painting of the bus shelters as per the direction and requirement. (*THE RATES SHOULD BE INCLUSIVE OF GST AND ALL OTHER TAXES)