CA NO GE(N)/AMB-33(P)/2020-21 REPAIR/ REPLACEMENT AND RE-WIRING OF INTERNAL ELECTRIFICATIONS WITH OTHER ALLIED CONNECTED WORKS IN AREA -I IN SECTOR A MD ACCN AND OTHER AREAS OF AGE E/M (NORTH) AMBALA CANTT

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings, calling bell etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etccomplete all as specified and as directed by the Engineer-in-Charge.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit medium grade ISI marked not less than 20 mm dia with accessories, concealed/surface type on wall/ceiling and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of including sunken pressed steel terminal boxes (modular type, size/modules as required at site) with and including modular covere plate over sunken box for housing the modular switches , socket outlets & fan regulators etc with brass screws and making good the disturbed surfaces as per existing for:- One light point/bell/fan point controlled by one switch Note:-1. Modular metal flush/sunken Box alongwith modular switch/socket cover plate & sheet are inclusive in the item rate quoted. 2. Only switch, socket and fan regulators to be measured and paid separately.

-Do- but One 3 pin socket point 5 Amps on independent board, complete all as specified and as directed by the Engineer-in-Charge.

-Do- One 3 pin socket point 5 Amps on same board, complete all as specified and as directed by the Engineer-in-Charge.

All as per srl item No 1.02 here-in-before but for one socket point 15 Amp with 4 sq mm PVC unsheathed FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 4 sq mm green colour FRLS-H, 1100 volt grade ISI marked copper wire as earth continuity conductor connected to common earth dolly complete all as specified and as directed by the Engineer-in-Charge.

S&F switch modular switch 6 Amp 1 way 1 module 230 volts complete all as specified and as directed by the Engineer-in-Charge.

S&F switch modular 16 Amp 1 way 1 module 230 volts complete all as specified & as directed by the Engineer-in-Charge.

S&F socket modular 2/3 pin 5 Amp 2 module 230 volts complete all as specified & as directed.

S&F socket modular 2/3 pin 6/16 Amp 2 module 230volts complete all as specified and as directed by the Engineer-in-Charge.

S&F of electronic Fan regulator modular 100 watt 1 module complete all as specified and as directed by the Engineer-in-Charge.

S&F modular bell push 6 Amp 1 way 1 module 230 volts complete all as specified and as directed by the Engineer-in-Charge.

S & F Calling bell ding dong type SP AC supply, 230 volts.complete all as specified and as directed by the Engineer-in-Charge.

S & F of TV modular sockets 5 Amp 2 module 230 volts complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix ceiling rose surface type 2/3 terminal 5 amps complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix lamp holder, insulated body, with back plate for angular batten fittings complete all as specified and as directed by the Engineer-in-Charge.

S&F LED lamp 9 watt threaded/pin end, warm/cool lamp type as per site requirement suitable for fixing on existing batten/angular holders complete all as specified and as directed by the Engineer-in-Charge.

S&F LED lamp 12 watt threaded/pin end, warm/cool lamp type as per site requirement suitable for fixing on existing batten/angular holders complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing LED batten fitting 18-20 watt, 4 feet, aluminium body including driver, tube rod y cool/warm white industrial model complete connecting with copper conductor flexible cable from ceiling rose to connector of the light including disconnecting and taking down existing light fitting and removal complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing LED batten fitting 10-12 watt, 2 feet, aluminium body, including driver, tube rod, industrial model complete connecting with copper conductor flexible cable from ceiling rose to connector of the light including disconnecting and taking down existing light fitting and removal complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing LED surface mounted bulk head luminaries 8-10 W with min 800 lumen ,industrial model, IP 65, Aluminum housing, surge protection including drivers etc complete with all accessories connecting with copper conductor flexible cable from ceiling rose to connector of the light including disconnecting and taking down existing light fitting and removal complete all as specified and as directed by the Engineer-in-Charge.

S&F LED Bldg Security Light Fittings of capacity 40 -45 watt made up of die cast aluminium housing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including service bracket of GI pipe 32 mm bore medium grade of length 0.9 mtr with MS clamps, bolts, nuts, and washers and suitable reducer for connecting fitting to GI pipe as required at site and making electrical connection, including disconnecting and taking down existing old U/S fitting complete all as specified and as directed by the Engineer-in-Charge.

S & F LED Bollard 8-10 W, IP-65 luminaire made of pressure die-cast aluminium housing, 240 volt, 50HZ, AC supply , complete with all accessories internally pre wired including connecting with flexible copper conductor from Electric Supply Source to connector of the light including PCC 1:3::6 of size 400x400x400 mm, including disconnecting and taking down existing old U/S fitting and removing complete all as specified and as directed by the Engineer-in-Charge.

S & F LED post top luminaire 30W IP-65 made of pressure die-cast aluminium housing & clear glass 240 volt, 50HZ, AC supply complete with all accessories internally pre wired including connecting with fitting and including fitting & provision of 3 core PVC flexible copper conductor from Electric Supply Source to connector of the light, including disconnecting and taking down existing light fitting and removing old U/S fitting complete all as specified and as directed by the Engineer-in-Charge.

S&F single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp complete with and including one single pole MCB.20 Amp including removing old Unserviceable enclosure complete all as specified and directed

Supply and fix sheet metal MCB DBs 12 way with 200 Amps rated bus bar single pole and neutral IP-43 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surface after removing old Unserviceable MCB DBcomplete all as specified and as directed by the Engineer-in-Charge.

Supply and fix sheet metal enclosure Vertical triple pole & neutral(VTPN) with MCCB 63 Amp for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection including making smooth the disturbed surface complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix MCB SP 6-32 Amps, 240 volt,10 KA 'C' curve including removing old Unserviceable MCB complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix MCB SPN 32/40 Amps, 240 volt,10 KA 'C' curve including removing old Unserviceable MCB complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix RCBO 32 Amps 2 Pole, 2 module 100 ma (HI immunity) sensitivity 230 volts 50 Hz ISI marked, including removing old Unserviceable RCCBO complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix in repair over voltage release 230 V, single phase in one module suitable for 1 Ph+N complete all as specified and as directed by the Engineer-in-Charge.

S&laying sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volt grade ISI marked with multi stranded copper conductor with one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor connected to common earth dolly including capping & casing or concealed on wall/ceiling in PVC conduit medium grade not less than 25 mm dia ISI marked of adequate size for housing the wires complete all as specified including taking out of old U/s sub main wiring of any size . Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty 2 core, 6 sq mm cable with PVC insulated aluminium conductor multistranded served with an inner sheathing of PVC tape and overall PVC sheathed in service connection, including disconnecting and taking down old U/S existing cable complete all as specified and as directed by the Engineer-in-Charge.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty 2 core, 10 sq mm cable with PVC insulated aluminium conductor multistranded served with an inner sheathing of PVC tape and overall PVC sheathed in service connection, including disconnecting and taking down old U/S existing cable complete all as specified and as directed by the Engineer-in-Charge..

Supply and laying XLPE insulated, armoured heavy duty electric cable 25 sqmm 3.5 core with aluminium conductor, 1100 volts grade, including disconnecting and taking down old U/S existing cable complete all as specified and as directed by the Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth in soft/loose soil and getting out complete all as specified and as directed by the Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed by the Engineer-in-Charge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

M&L for sand cushoning under the cable for protecting the cable being damaged from external load complete all as specified and as directed by the Engineer-in-Charge.

Brick covering with width equal to length of bricks as mechanical protection to cable with well burnt sub class `B` bricks laid dry and flat complete all as specified and as directed by the Engineer-in-Charge.

S&F light grade GI Tubing of size 40 mm dia for cable protection and fixed with clamp to pole and wall with nut bolts,including disconnecting and taking down existing pipe and removing complete all as specified and as directed by the Engineer-in-Charge.

M&L for earthing complete (in repairs) with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth plate not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts, check nuts and washers of brass all as shown in electrical plate No 5 connected to earthing test point and testing on completion all as specified and directed. Note :- Cost of excavation and earth work, PCC pit, CI cover, funnel, watering pipe, wire mesh, charcoal dust, common salt and earth lead up to 7.5 mtr long shall be deemed included in the unit rate for earthing complete all as specified and as directed by the Engineer-in-Charge.

Refixing only existing serviceable LED light fittings of any description after cleaning complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of Acrylic emulsion distemper over 2-3mm thick wall care putty complete all as specified and as directed by the Engineer-in-Charge.

R N Enterprises

Saurav Enterprises