DEVELOPMENT OF REGIONAL CENTER OF I-HUB AT VADODARA

Sr. Rate (With Labour

Description Unit Qty Amount

Dismentalling doors, windowas, ventilators etc.(wood or steel) shutters

including chowkhats, architraves, Holdfasts and other attachments etc. complete

and stacking the materials with all lead and lift. 1) Not exceeding 3 smt. in area

Demolition of Brick work and stone masonry including stacking of serviceable

2 materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cum 10.00 ₹ 564.16 ₹

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

3 materilas and disposal of unserviceable materials with all lead and lift. Smt 765.00 ₹ 48.91 ₹

Dismantling santtary fittings like wash basin . W.C. pan Indian and European type,

4 flushing tank etc.including stacking the materials with all lead and lift. Each 23.00 ₹ 415.79 ₹

Removing and scraping of old deteriorated plaster of any thickness fromm wall

/ R.C.C member including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

Removing dry or oil bound distemper by a washing and scraping and sand

6 papering the wall surface smooth including necessary repairs to scratches Smt 2811.00 ₹ 11.58 ₹

Providing wood work in frames of Doors, windows cleare story windows and

7 othersimilar works wrought, framede and fixed in position. (A) Indian Teak Wood 10 Cu.Dm 50.00 ₹ 610.23 ₹

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory

windows including Indian teak wood frames 10 cm x 7 cm. size including anodized

8 alluminium fixtures and fastenings including primer coat of approved quality and Sqm 11.00 ₹ 5,338.30 ₹

two coats of oil painting etc, complete.

(ii) Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory

windows includingIndian teak wood frames 10 cm x 7 cm. size including anodized

alluminium fixtures and fastenings including primer coat of approved

quality and two coats of oil painting etc, complete.

(iii) Partly panelled and partly glazed.

Aluminium Sliding Window with Provision for Mosquito Mesh Track

Providing and fixing sliding window with extruded aluminium colour anodized

sections conforming to relevant IS standards, comprising main outer frame section

of size 63.50 × 38.10 × 1.95 mm (minimum weight 1.094 Kg/Rmt), two-track

horizontal member of size 61.85 × 31.75 × 1.20 mm (minimum weight

Kg/Rmt), and vertical member of size 61.85 × 31.75 × 1.30 mm (minimum weight

0.659 Kg/Rmt). Sliding shutter to consist of horizontal and vertical members of size

40 × 18 × 1.29 mm (minimum weight 0.456 Kg/Rmt). Glazing to be 5 mm thick

transparent bronze tinted float glass fixed with approved glazing bead and

transparent silicone sealant.

Outer frame shall be provided with additional separate track provision for future

fixing of sliding mosquito mesh shutter. (Mosquito mesh shutter and mesh not

included in this item.)

Providing and fixing standared extruded of alluminium section of size 63mm x

38.10mm x 1.2mm ( Wt. 0.643 Kg/mt) with colour anodized alluminium frame

for ventilation with 5 mm thick frosted glass as details

Roller blind fabric should be made up of 30-35percentage Fiberglass, 65-

70percentage Vinyl on Fiberglass, it should have specific low emissivity treatment

and Lead free with Greenguard Gold certification. Fabric approved by Melanoma

International Foundation (MIF), it should cut UV rays with 97percentage

approximately and antimicrobial properties as per ASTM E 2180, ASTM G21,

AATCC30 Part 3, ASTM D 3273, GREENGUARD Gold and Bacteria Standard

ASTM 6329; includes Microban antimicrobial additives. It should have

3percentage openness, fabric thickness should be 0.50-0.55 mm, fabric

weight should be 478 grams per square meter, The fabirc should be Flame

retardant as per California U.S. Title 19 (small scale), NFPA 701 TM#1 (small scale),

12 NFPA 101 (Class A Rating), IBC Section 803.1.1 (Class A Rating), BS 5867 Part 2 Type Smt 282.00 ₹ 2,900.00 ₹

B Performance, NFPA 701 TM#2 (large scale), CAN/ULC-S 109 (large and

small scale), CAN/CGSB2-4.162-M80 with 10 years of warranty against any

distortion in fabric due to any reason. Roller blind tube should be made of

Aluminium with a diameter of 38mm, bottom rod should be powder coated and

should come with the end cap to support the fabric, aluminium brackets and

a ball chain or any other sturdy fixing arrangement as per manufacturer

specification all complete as per direction of Engineer in charge.

Providing and laying cement concrete flooring 1:2:4 (1- cement : 2-coarse sand : 4-

13 graded stone aggregate 20mm nominal size) laid in one layer and finished with a Smt 5.00 ₹ 340.78 ₹

floating coat of neat cement. (B) 50mm thick.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

14 :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with Smt 753.00 ₹ 1,001.14 ₹

pigment to match the shade of slab including rubbing and polishing etc. complete.

Providing and laying polished Kota stone slab 25mm thick in risers of steps,

skirting, Dedo and pillars, laid on 10mm thick cement mortar 1:3, jointed with grey

cement slurry mixed with pigment to match the shade of slab, including rubbing

and polishing etc. complete.

Providing 15mm thick cement plaster in single coat on Rough (Similar) side of

16 single or half brick walls for interior plastering upto floor two level ... Cement Smt 300.00 ₹ 192.41 ₹

Applying general insecticide pest control treatment to floors, cupboards

etc including labour materials etc. complete. Using Imidacloprid 30.5 SCas Per IS

6313 part -II( (0.075percentage concentration by mass) is recommended 10.5ml

chemical diluted with 5 liters of water application 0.5 litre chemical / Sqm of

surface is recommended as per I.S.

Applying two coats of putty and two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and sand

papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

19 throughly brushing the surface free from mortar droppings and other foreign Smt 2691.00 ₹ 80.87 ₹

matter and sand

papered smooth.

Brick work using common burnt clay building bricks having crushing strength not

20 less than 35 kg./Sq.Cm. in superstructure in Cement Mortar 1:6 (1- Cement : 6 -fine CUM 10.00 ₹ 4,662.82 ₹

sand)(A) Modular

20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand)

and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Finishing wall with water proofing cement paint of on wall surfaces (Two coats) to

give an approved brand and manufacture and of required shape even shade after

thoroughly brushing the surface to remove all dirt and remains of loose powered

TYPE 01 - SIGNAGES WITH SS PLATE : Providing and fixing of the following signages

using make of cosign or equivalent approved make by architect.All the detailed

work out as per the detailed drawing and instruction of Employer's representative/

Employer.,specifications and drawings as indicated there in to all heights and

elevation including necessary scaffoldings / supports /permanant fixing with

cement mortor if fixed to ground etc complete in all respects.The Signage cost

should be inclusive of panels,hanging system,bridges,primary & secondary fixings,

vinyl,painting,powder coating self glowing mateial as directed etc.All shop

drawings and coordination with other services is in scopeof contractor. Size (125 x

400mm) - FACE /WALL MOUNTED NAME PLATES/SIGNAGES/INFORMATION

SIGNAGES (without back lit)

Providing and supplying Executive High back revolving chair made out of MS

powder coated steel tube frame base, high density molded PU with fabric

upholstery in seat and ergonomically contoured PP designed backrest of high

density PU with contrasting or matching fabric upholstery with fixed type PU

padded arm rest with heavy duty castors under structure of chair and

Polyurethane armrests confirming to IS standard and fabric as per sample

approved of Make: ERGO, BMC, ASHIRVAD, NILKAMAL, BLUEBELL, HOF OR

equivalent brand by the Architect / Engineer in Charge. including supply, delivery

and placing at all levels complete.

Mid Back -Work station :Providing and supplying medium back revolving chair

suitable for workstation use, having upholstered seat with high density PU foam

and breathable mesh back with lumbar support, synchro / knee tilt mechanism

with tilt tension control and locking arrangement, pneumatic height adjustment,

adjustable armrests, heavy duty nylon base with twin wheel castors, all complete

conforming to relevant IS standards and approved make such as ERGO, BMC,

ASHIRVAD, NILKAMAL, BLUEBELL, HOF or equivalent as approved by Architect /

Engineer-in-Charge, including supply, delivery and placing at all levels complete.

Private office table : Providing and supplying Modular Main Work Table with Metal

Mobile Drawer Unit (MDU) and Side Storage complete, consisting of main table of

size 1800 mm (L) × 900 mm (W) × 760 mm (H) having 25 mm thick pre-laminated

particle board top with 2 mm thick PVC edge banding on all exposed edges. The

main table shall be supported on 50 × 50 mm CRCA steel tubular open type legs

with epoxy powder coated finish and provided with M.S. perforated sheet

modesty panel/apron with powder coated finish.

The unit shall include one metal mobile drawer unit (MDU) comprising three

drawers with central locking system, powder coated finish, mounted on four heavy

duty castors (two with locking arrangement) including all necessary hardware

The side storage unit of size 825 mm (L) × 450 mm (W) × 700 mm (H) shall be

made of 18 mm thick pre-laminated particle board with 2 mm thick PVC edge

banding on all exposed edges, provided with hinged shutter of 18 mm thick board

fixed on auto hinges, multi-lock system, handles and necessary fittings complete.

The rate shall be inclusive of all materials, hardware, fittings, loading, unloading,

transportation, assembling, placing at all floor levels, all leads and lifts, and

complete in all respects as per approved sample and direction of Engineer-in-

Make: FEATHERLITE / GODREJ / HAWORTH / HOF / Equivalent approved.

Providing and supplying Executive Conference Table of size 4800 × 1500 × 750 mm

(16–17 seater) as per approved drawings.

Table top made of 25 mm thick HDHMR / BWR grade plywood finished with

mm high pressure laminate on both sides and 2 mm PVC edge banding on all

Supported on heavy duty fabricated 50 × 50 mm CRCA steel frame (minimum

mm thick) with intermediate bracing.

Steel frame finished with epoxy powder coating of minimum 60–80 microns

27 thickness. Each 1.00 ₹ 2,75,000.00 ₹

Including M.S. perforated modesty panel with powder coated finish.

Providing concealed cable tray system for wire management.

Including minimum four wire manager grommets and provision for power/data

Complete with levelling adjusters, fittings and necessary hardware.

Rate inclusive of fabrication, transportation, installation at all floor levels and

finishing complete.

Make: FEATHERLITE / GODREJ / HAWORTH / HOF / Equivalent approved.

Providing and fixing PVC vinyl wooden flooring (plank type) of minimum 2 mm /

mm thickness with wear layer not less than 0.3 mm suitable for office and

conference room use, having anti-skid, anti-static and fire-retardant properties

conforming to relevant standards. Flooring to be installed over prepared and

levelled surface using approved adhesive system complete with edge trimming and

finishing. Rate shall include material, adhesive, labour, cutting, wastage and

installation complete in all respects.

Partitionwork:Providingandfixinginpartitionfloortoceilingheightedpartitionworkwit

hallnecessaryfittingsasperapprovedselectionbyArchitects.12mmthick

plywood/MDf with 4mm venner/Lamiante/color finish as per

selection.Ratetobeinclusiveoflipping,cutting,wastages,necessaryfixtures,nails,adhe

29 sives,necessaryscaffolding,fixingatallheightsandforallfloorsasperdrawingandapprov Smt 232.00 ₹ 10,000.00 ₹

edsampleetcfinishwithveneersemiglossPUfinsh.(Mode of Measurements:Only

thepartition height shall be measured and paid for the items in which partition

work is not inclusive in item description)

Aluminium Sliding Mosquito Mesh Shutter (Fibre Mesh)

Providing and fixing aluminium sliding mosquito mesh shutter to suit existing

aluminium window frame, fabricated from light duty aluminium sections

(minimum 1.0–1.2 mm thick) with fibre insect mesh securely fixed within shutter

30 frame. Shutter to run on nylon rollers in separate mosquito track, complete with Smt 22.00 ₹ 1,450.00 ₹

handle and necessary fittings. Rate shall include cutting, fabrication, fixing,

adjustments, labour and installation complete in all respects. Measurement shall

be in Sq.m of actual mesh area.

Providing, supplying and placing in position two-seater sofa of approved make and

design, size approx. 1300–1500 mm (L) × 750–850 mm (D) × 800–900 mm (H),

constructed with internal frame of seasoned hardwood (moisture content not

exceeding 12%) and commercial grade plywood (minimum 12 mm thick), including

seat and back cushions made of high-density polyurethane foam (minimum

kg/m³ for seat and 24 kg/m³ for back), supported on elastic webbing/belt system.

The sofa shall be upholstered in approved quality fabric/leatherette (minimum

GSM or equivalent), including armrests, backrest, seat base, wooden/powder-

coated metal legs (minimum 50 mm height), proper stitching, finishing, and all

necessary fittings complete as directed by Engineer-in-charge.

Providing, supplying and installing modular office workstation/cubicle system

comprising four interconnected workstation seats in 2×2 arrangement, each

having approximately 1200 mm × 600 mm worktop and approximately 1200 mm

high partition/divider panels; comprising 25 mm thick commercial plywood

worktop finished with 1.00 mm thick approved decorative laminate on top and

bottom faces, with neatly finished matching laminate/approved edge treatment;

approximately 50 mm thick sandwich-type side/divider panels comprising 4 mm

thick commercial plywood facings on both sides with approved internal supporting

core/frame maintaining the required overall thickness, finished with 1.00 mm thick

approved decorative laminate on exposed faces; CRCA fabricated supporting

framework using suitable sections/thicknesses, including main load-bearing

32 members of minimum 1.5 mm thick CRCA sheet/section, duly welded/fabricated, 28.00 ₹ 9,210.00 ₹

ground and finished with epoxy/polyester powder coating of minimum 50–60

micron dry film thickness; including heavy-duty adjustable levelling feet/bolts,

cable management/raceway with covers and accessories, cable grommets,

brackets, connectors, screws, nuts, bolts, washers, fasteners and all necessary

hardware ; including electrical socket & LAN socket Concealed fitting(fixtures

excluded), cutting, drilling, fabrication, welding, grinding, surface preparation,

assembly, installation, alignment and finishing complete as per approved sample,

shop drawing and direction of Engineer-in-Charge. Chair excluded.

Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using

water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI

suspender channel of size 25 mm x 3 mm with intermediate channel og size

mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm

x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm x

mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor

fastener, scoch bolt connecting cleat,joining compound top coat on ceiling

incl.making necy.opening for light fitting,diffuser etc. comp. as per detail drawing

Providing, supplying, fabricating and fixing outdoor illuminated 3D acrylic letter

signage board of overall size 5'-0" × 4'-0", displaying “i-Hub / Regional Center /

VADODARA”, comprising 3 mm thick exterior-grade ACP backing panel with duly

fabricated and powder-coated MS supporting frame and decorative perimeter

border, 3D acrylic letters of approved colour, finish and minimum 30 mm

depth/projection, with the “i” in approved red colour and remaining lettering in

approved colour, provided with high-efficiency 12 V DC LED modules for uniform

halo/back illumination, suitable weather-protected LED driver/SMPS of adequate

34 capacity with minimum 20% spare capacity, concealed internal wiring, connectors Each 2.00 ₹ 27,870.00 ₹

and electrical accessories, mounting brackets, fasteners, sealant, edge finishing,

necessary supports and complete weatherproofing, including external LED

spotlights over the signage wherever shown in approved drawing, fabrication,

transportation, lifting, installation, testing and commissioning complete in all

respects as per approved drawing, manufacturer's specifications and directions of

Engineer-in-Charge.

Providing and fixing wash down water closet (European type, W.C. Pan) with

integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1

35 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for Each 4.00 ₹ 1,336.30 ₹

separately)(A) vitreous China Pattern :(i) in white colour

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild

brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size

brass ball valve with polythene float, C.P brass handle unions and couplings for

connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled

flush bend including cutting holes in walls and making good the same connecting

the flush bend with cistern and closet (overflow pipe to be measured and paid for

separately)(A) Vitreous China (I) In white colour

Providing and fixing concealed dual flush PVC flushing cistern of 6/3 litre capacity

suitable for European W.C., to be installed inside wall including cistern tank, inlet

37 valve, outlet pipe, dual push actuator stainless steel (S.S.) plate, supporting Each 8.00 ₹ 4,000.00 ₹

frame/brackets, connections and all necessary fittings including cutting and making

good the wall complete.

38 Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan Each 8.00 ₹ 39.78 ₹

Providing and fixing plastic seat and cover for wash down water closer with C.P.

39 brass hinges and rubber buffers. (B) Black plastic seal and cover. Each 8.00 ₹ 291.33 ₹

40 Health Fauset Heavy duty with hook with fitting No. 8.00 ₹ 582.03 ₹

Providing and fixing washbasin with single hole for

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the same

but excluding fittings.(A) Vitreous China:(ii) Flat

Back washbasin 550 mm x v 400mm size. (i) In

Providing and fixing pillar tap, capstan head, screw

42 down high pressure with screws, shanks and back Each 8.00 ₹ 308.73 ₹

nuts. (i) 15mm dia.

Providing and fixing C.P. brass waste for wash basin or sink. (A) 32mmdia.

Providing and fixing chromium plated, bottle trap

44 with necessary couplings of approved quality for Each 8.00 ₹ 295.80 ₹

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass

45 mounted on 6mm thick A.C. sheet or plywood sheet and fixing to Each 8.00 ₹ 854.58 ₹

wooden pluge with C.P. brass screws and washers

Providing and fixing Urinal or approved quality including conecting the Urinal with

46 waste pipe , tap etc. complete.(A) White earthenware flat back or corner type size Each 5.00 ₹ 1,062.18 ₹

Providing and fixing chromium plated brass half trun flush cock of approved quality

47 including fixing in pipe line etc. complete.(i) 20mm dia. Each 7.00 ₹ 254.78 ₹

48 C.P. Angle stop cock 15 mm Heavy duty with cap No. 16.00 ₹ 407.42 ₹

49 C.P. Bib cock 15 mm Heavy duty with cap No. 16.00 ₹ 400.58 ₹

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5)

PIPE having National Sanitation Foundation (NSF) seal for potable water of

50 following dia. nominal bore tube fittings and clamps including making good the Rmt 100.00 ₹ 170.36 ₹

wall, ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5)

PIPE having National Sanitation Foundation (NSF) seal for potable water of

51 following dia. nominal bore tube fittings and clamps including making good the Rmt 50.00 ₹ 208.80 ₹

wall, ceiling and floor etc. complete. [B] 20 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5)

PIPE having National Sanitation Foundation (NSF) seal for potable water of

52 following dia. nominal bore tube fittings and clamps including making good the Rmt 40.00 ₹ 253.82 ₹

wall, ceiling and floor etc. complete. [C] 25 mm.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including testing of pipe and

joints and fixin the same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each

54 other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the Rmt 50.00 ₹ 856.03 ₹

size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center

to center or shall be concealed in walls as directed including necessary fittings such

as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Providing and laying (to level or slopes) and jointing with stiff mixture of Cement

56 Mortar in proportion 1:1 Salt glazed stoneware pipes including testing of pipes and Rmt 20.00 ₹ 312.76 ₹

joints complete.(B) 150mm dia.

Providing and laying Cement concrete 1:5:10 (1- Cement : 5-Fine sand :10-Graded

stone aggregate 40mm nominal size) bedding for stoneware pipes of following

internal diameters with necessary formwork and curing complete.(B) 150mm dia.

(166mm Ave. bed thickness)

Extra over item For above for providing salt Glazed stoneware fittings.(i) Bends of

58 required degree (any redious) of following nominal diameters.(B) 150mm dia. Each 4.00 ₹ 63.79 ₹

Extra over item 24.1 for providing salt Glazed stoneware fittings.(iii) Single Junction

59 of required angle of following internal diametrs. (B) 150mm. Each 4.00 ₹ 120.42 ₹

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and

water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type

Constructing brick masonry chamber for underground C.I. Inspection chamber and

with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover

with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

61 (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone Each 3.00 ₹ 3,660.76 ₹

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(ii) Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two inlets.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand :

4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-

cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick

with Cement Mortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat of

neat cement and making channels in cement concrete 1:2:4 mix (1- Cement :2-

Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete

including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep

including C.I. cover with frame size 560mm diameter total weight of cover and

frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A)

With 230mm thick walls of brick msonry using brick having crushing strength not

less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A

type depth 0.90 Metre for 150mm diameter sewer.

63 C.I. Cover with frame 300mm x 300mm Each 10.00 ₹ 400.58 ₹

64 C.I. Nahni trap Each 10.00 ₹ 136.10 ₹

65 Cast iron grating 100mm dia. Each 10.00 ₹ 31.67 ₹

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm /

300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry

Providing and fixing 30mm thick factory made moulded door shutter wood free

consisting of frame made out of M.S. tubes of 19 gauge thickness and size of

25mm x 25mm for stiles, top and bottom rails, M.S. frame shall have a coat of steel

primers. The inner panel shall consist of 25mm thick High Density EPS conforming

to IS 4671-1984 bonded with 2mm thick termite proof, water proof and fire

resistant moulded PVC sheet with 2,4,6 raised panel design in different plain and

/or prelim colours after routing the moulded design on one side and 2mm

plain and/or prelim PVC sheet on other side of the EPS. The edges of panel to be

sealed with lipping of 10mm wide PVC sheet batton (made by sticking 2 PVC rigid

foam sheets of 5mm thickness using PVC solvent cement) and stiles 25mm (5mm x

5) thick and 30mm width PVC sheet fitted along M.S. tube for lock provision and

for lock height 5mm thick PVC sheet of size 150mm x 100mm fixed with upper and

lower face of inner side of EPS panel etc. complete as per direction of Engineer in

charge manufacture’s specification and drawing

Providing and fixing factory made polyvinyl chioride (PVC) door frame of the size

50 x 47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC

foam sheet, mitre out of two corners and joined with 2nos. of 150mm long

brackets of 15 x 15mm M.s. Square tubes. The two vertical door profiles are to be

reinforced with 19 x 19 mm m.s. square tube of 19 gauge, EPDM rubber gasket

68 weather seal to be provided through out the frame. The door frame shal be fixed sqm 10.00 ₹ 318.03 ₹

to the wall using 65/100 mm long M.S. screws through the frame by using PVC

fasteners. A miniumum of 4 nos. os screws to be provided for each vertical

members and minium 2 nos. for horizontal members etc. complete as per

manufactures specification and direction of Engineer in charge.

69 S.S. Door / Window hinges 4x3/4"x3/4" Each 200.00 ₹ 22.25 ₹

70 S.S. Stopper 20 Cm long of ASIS 304 Each 20.00 ₹ 127.53 ₹

Providing and fixing stainless steel occupied/vacant indicator lock for toilet door

suitable for PVC door shutter including sliding bolt mechanism, red/green indicator

plate, necessary screws and fittings, complete fixing and installation as directed by

Engineer-in-charge.

72 Providing and fixing C.P. brass towel ring including fixing complete Each 8.00 ₹ 363.60 ₹

Providing and fixing SS robe hook on toilet door including fixing complete

Polishing with french polish on new wood and wood based

surface to give an even surface including cleaning, the

surface of all dirt, dust and sand papering smooth and

including a coat of wood filler.

Providing and fixing sheet glass, selected quality (Type-C) bedded in putty and

fixed with wooden beading including the cost of wooden beadings of first class

teakwood and necessary cutting of glass. (1) 5 mm thick.

Point wiring for Light / Bell with 2-1.5 sq.mm and earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length , in below type of pipe erected with 6A Modular

type switch / bell push and accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete,Cat. III

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 kV grade FRLS PVC insulated

multi strand copper wires, in below type of pipe to be erected complete with

earth continuity and necessary connection with primary light with accessories

77 erected on Metal / PVC / wooden box covered with 3 mm thick Pt. 60.00 ₹ 158.57 ₹

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary

Lamp holder / ceiling rose / H.D.Connector as directed. (a) with medium class Rigid

PVC pipe and accessories erected flushed on wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm and earthwire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in / flushed on wall/ceiling

complete with 6A Modular type switch and hum free EME four or more step type

electronic fan regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single mounting base

frame covered with textured/metallic front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as

directed.(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete,,Cat. III

Point wiring for Individual Plug with and earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete with Modular type switch and

5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe erected with following type

of accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire

from nearby switchboard/mcb db board,(a) with medium class Rigid PVC pipe

and accessories erected flushed on wall/ceiling complete,Cat. III

Point wiring for Individual Plug with and earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete with Modular type switch and

5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front

80 plate modules erected on / in wall / ceiling as per pipe erected with following type Pt. 25.00 ₹ 853.45 ₹

of accessories.[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.,(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete,Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch and

pin socket erected on PVC / Metallic/Wooden box, single mounting base frame

81 covered with textured / metallic/white front plate modules erected on / in wall / Pt. 24.00 ₹ 309.06 ₹

ceiling with following type accessories,Cat. III

Providing and erecting Switch board for Computer or electric apparatus consisting

of following modular type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame covered

82 with textured/metallic /white front plate,modules erected with necessary Ea. 45.00 ₹ 1,133.22 ₹

connections as directed 1 no. 6A/16A universal plug-switch combined. 3 nos. 6A

Switch 3 nos. 6A 5 pin Plug ,For Modular Type Accessories, Cat. III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured

83 / metallic/white front plate , modules erected with necessary connections as per Ea. 45.00 ₹ 160.59 ₹

site situation directed by Engineer In charge.(8) Computer RJ-45 socket ,Cat.III

Providing & Erecting eight module pop up floor box/flushed with table surface

Conform to IEC 60670-1, IEC 60670-23 & IEC 60884-1 with required items as

demanded by engineer in charge with complete finishing .cat-III

Supply& installation of modular type accessories for UPVC snap-on adaptable

trunking/Popup Box with required items erected with necessary connection. As

desired by Engineer In charge

i) 6 A SP 1 Way Switch cat-III

Supply& installation of modular type accessories for UPVC snap-on adaptable

trunking/Popup Box with required items erected with necessary connection. As

86 desired by Engineer In charge Ea. 10.00 ₹ 350.47 ₹

iv) 6A universal socket shuttered cat-III

Supply& installation of modular type accessories for UPVC snap-on adaptable

trunking/Popup Box with required items erected with necessary connection. As

87 desired by Engineer In charge Ea. 5.00 ₹ 566.61 ₹

vi) Cat-6 LAN Socket cat-III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

88 fittings and Junction boxes fixed with adhesive solution and Clamps with following Mtr. 300.00 ₹ 24.24 ₹

dia of pipes, in approved manner as directed ,(a)20 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

89 fittings and Junction boxes fixed with adhesive solution and Clamps with following Mtr. 1000.00 ₹ 33.33 ₹

dia of pipes, in approved manner as directed ,(b)25 mm

Providing and erecting PVC Corrugated Flexible Conduit with required nos. of

90 coupling, PVC bushes, Check-nuts etc. complete of following sizes.(1) 20 mm Mtr. 75.00 ₹ 17.17 ₹

Providing and erecting PVC Corrugated Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc. complete of following sizes.(2) 25 mm

Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable

trunking of 1.6 mm thick having with stand point load up to 1.33 Ton & free from

seepage of concrete of screed water with all accessories,Junction Box,Joints as

required and demanded by engineer-incharge and laying/erecting as per OEM

guidelines and as per instruction of engineer incharge having following size of

dimensions and No of compartments (W x D x T) Cat-III [4] 225mm x 25mm x

mm with Three Compartment

Supply & installation of surface mounted U PVC snap-on adaptable trunking

raceways, fabricated out of U-PVC to Off-White or approved shade as per IS 733 of

thickness 2.0mm for the base and sides with all accessories like removable covers,

joints ,height spacer,angles complete with necessary bends, suitable sized junction

93 boxes and tees etc, Complete. Mtr. 50.00 ₹ 1,062.52 ₹

(a)Size: 50x80mm PVC Raceways for Power & Data with 2 compartments above

specifications.

Providing and erecting Mains with 1.1KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed

in / flushed on wall /ceiling, with 1.5sq.mm copper conductor FRLS PVC insulated

94 stranded wire of green colour for earth continuity of following size Mtr. 600.00 ₹ 78.78 ₹

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size ,(A) With

medium class Rigid PVC pipe and accessories,(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall

/ ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size(A) with medium class

Rigid PVC pipe and accessories,(a) 2 wire 4 sq. mm

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms

to IS 8623-1 and 3, IEC 61439-1 and 3 without MCB to house appropriate nos. of

97 MCBs.(The DBs should be used of same company of MCB to be used) Ea. 2.00 ₹ 2,913.85 ₹

suitable for(B) three phase incoming and single phase horizontal type outgoing

Per phase isolation type (PPI),(b) sheet steel double door (ii)6 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms

to IS 8623-1 and 3, IEC 61439-1 and 3 without MCB to house appropriate nos. of

98 MCBs.(The DBs should be used of same company of MCB to be used) Ea. 2.00 ₹ 3,412.79 ₹

suitable for(B) three phase incoming and single phase horizontal type outgoing

Per phase isolation type (PPI),(b) sheet steel double door,(iii)8 way

Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above protection

as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet

for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel including cutting, bending,

drilling, welding, riveting with internal partitions & cable alley as per requirements

& instruction of engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking arrangement and rubber

gasket,heavy duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted with epoxy powder

coating. (The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied with following

approved manufacturers with following size. (C) The standard companies switch

gear shall be used and only manufacturers as per IEC 61439 for beneficial use. (ii)

with 550 mm. Depth

(2 Nos. panels to be supplied, 1 Sq.Mtr each)

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper

Busbars with four equal Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with

colour insulating tape for phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary connections. (B) Suitable for

200 Amp. capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper

Busbars with four equal Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with

colour insulating tape for phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary connections. (A) Suitable for

100 Amp. Capacity

providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall

/ ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A) with medium class Rigid PVC

pipe and accessories (i) 4 wire 10 sq. mm (use earth wire of 4 sq.mm )

providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall

/ ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A) with medium class Rigid PVC

pipe and accessories (h) 4 wire 6 sq. mm

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal current

rating up to 25 A to 100A. with Fixed thermal and magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper

and complete erected in existing 16 G.M.S. housing. ICS=100percentage of ICU

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating

200A.with variable Thermal & magnetic release suitable to work on A.C.supply

Hz. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S.housing ICS=100% of ICU only Cat III

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having

106 10KA breaking capacity & confirms to IS :8828 in existing box having following Ea. 10.00 ₹ 702.96 ₹

capacity (b)40 Amp. Cat.III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any electronic component.

for following Max. rating erected as directed (ii) 40Amps. DP Cat. III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any electronic component.

for following Max. rating erected as directed

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark , Cat.III

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade

G.I. pipe with necessary coupling buch buried in specially prepared earth pit & G.I.

earth wire of 8 SWG erected & connected as directed (For panel)

111 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. Kg. 5.00 ₹ 794.87 ₹

Providing & erecting Approved make Power Saving 45 - 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep

112 complete having 3blades with aluminium blades with , canopy & 30 cm. down rod Ea. 15.00 ₹ 1,948.29 ₹

erected with earthing.(Make shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down

113 rod erected duly painted for fan complete with proper insulation without Mtr. 15.00 ₹ 108.07 ₹

leakage and earthing.

Supplying and erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab

with Making the site as original.

Supplying & erecting approved make low noise decorative exhaust fan having

115 square frame ABS body with inbuilt lowers & square frame. 250mm with 1350 Ea. 10.00 ₹ 1,703.87 ₹

Supplying and erecting approved make oscillating type medium duty bracket fan

with Aluminium Blades A.C. 230V. 50 Hz wall mounted with height adjustment and

116 rotary tilting device complete with guard, mounting accessories kit, pull cord for Ea. 10.00 ₹ 2,352.29 ₹

speed and oscillation flexible Core plug top complete erected with lead wires as

directed. (a) 400mm

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2Watt to

0.5Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure diecast

powder coated and high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160Vto270V, Power Factor

more than 0.95,THD 85 lumens/watt , LED driver efficiency > 85 % ( fitting required

LM-79 & LM-80Certificates) (NOTE: Below description have shown ranges of

117 Wattage capacity of LED fittings.The Engineer incharge may select any wattage Ea. 100.00 ₹ 758.51 ₹

capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Down light with provision for spring loaded mounting clips complete.IP20

(iv) 22-24 watts, Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. and corrosion resistance with diffuser housed

in aluminium casted body with company mark/name 160V to 270V,Power

Factor more than 0.9, THD < 15 percentage, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt , LED driver efficiency > 85 percentage ( fitting

required LM-79 and LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)(B) LED Panel Light with

provision for Plane front frame with translucent cover fixed to housing

complete.IP20,(vi) 36 watts, 24" x 24", Surge- 2KV,Cat-lll

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt

. LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4kV integral and ,Light must have 440VAC

line supply with over-voltage protection. (vii) 200 - 250 watts Cat-lll

Providing and erecting Inverter based approved make split air-conditioning unit

consisting of condensing unit with variable speed fan motor, inverter type

hermetically sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its accessories by

120 means of extra supplied proper insulated copper tubing,drain PVC pipes suitable Ea. 4.00 ₹ 49,125.39 ₹

for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting. (2)For ISEER Range

(KWH/KWH)(4.0 to 4.49) (A) for 0.8 to 1.0 ton capacity- Premium Cat.

Providing and erecting Inverter based approved make split air-conditioning unit

consisting of condensing unit with variable speed fan motor, inverter type

hermetically sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its accessories by

121 means of extra supplied proper insulated copper tubing,drain PVC pipes suitable Ea. 12.00 ₹ 79,620.32 ₹

for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting. (2)For ISEER Range

(KWH/KWH)(4.0 to 4.49) (C) for 1.7 to 2 ton capacity-Premium Cat.

Supplying and erecting insulated pair of soft copper tubing open or concealed

122 including power and control cable,necessary PVC drain pipes for Split/Cassette AC Rmt. 100.00 ₹ 1,158.47 ₹

machine up to 4 TR capacity

Supplying and installing MS angle , powder coated / Painted standard type of

wall/floor stand mount for outdoor unit of split AC of following capacity, erected

123 with necessary hardware materials as directed. (A) 25mm*25mm*3mm thick M.S Ea. 15.00 ₹ 1,318.05 ₹

angle suitable for up to 2 TR. Capacity of ac machine

Dismantling the existing light, fan, bell, independent plug point, wiring with mains

124 of all types along with accessories etc. complete and handed over to dept. Pt. 70.00 ₹ 1.01 ₹

Refilling the holes for dismantled point with cable with cement mortar & finishing

in an approved manner.

126 Dismantling the existing cables of all types & sizes Mtr. 100.00 ₹ 6.06 ₹

Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan complete

127 with accessories, G.I. down rod, frame etc. and making the site clear. Ea. 100.00 ₹ 9.09 ₹

128 Dismantling the existing any type of indoor light fittings Ea. 100.00 ₹ 5.05 ₹

Supplying and erecting approved make LAN cable of following size in existing

pipe as per direction,[C] CAT -

SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features L2+ Static Routing Optional “standard

130 mode” or “surveillance mode” management user interface 193 W PoE budget Ea. 2.00 ₹ 31,996.80 ₹

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag less [Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Jack Cat 6 Keystone UTP [Approved by Competent Authority i.e. not Below

the rank of Executive Engineer ]

SITC of Face Plate - Single (Keystone Jack,square) [Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded [Approved by

134 Competent Authority i.e. not Below the rank of Executive Engineer ] Ea. 2.00 ₹ 4,400.57 ₹

Supplying & erecting Mixing Console having channels, Audio mixer with. Echo

facility for live performance, Auditorium & stadiums, having following features &

facilities. [[Approved by Competent Authority i.e. not Below the rank of Executive

(a)input Channels :- Each channel has separate 6.25mm size balanced phone jack

for mike & line for balanced & unbalanced signals. (b) Individual gain control for

sating optimum level for minimum noise. (c) BASS, MID & TREBLE ‘ controls

Separately for each input channel. (d) ECHO control for each channel (e) PAN

control for echo channel for left or right output (f) AUX Control : To control , level

of the channe+B57 in final mix to AUX sound output (g) Channel ON/OFF switch

(h) ECHO Section :- ECHO, reverb & Chorus effect can be added to all input channel

by different setting of Delay, Reverb & Level control. (i) Tape section (j) Aux. send

& return For sending Pre-feeder output of channel for monitoring or adding a

135 special effect unit. (k) Mono / Stereo output controls (L) Master faders to control Ea. 1.00 ₹ 14,894.47 ₹

over left & right output (m) Head phone output for monitoring purpose. Technical

specification (a) Power Requirement -AC220-24OV 50 Hz DC 24 Volts (b) MIC

Output Impedance/gain -2 K Ohms/ 62 dB (c)Line Output Balance/42 dB —- 20 K

ohms (d) Impedance / Gain :- 10Kohms unbalance / 42 dB (e)frequency Response -

30 Hz- 20 KHz L / R Line Output ( + 0, -1 dB ) (f)Equalization Bass/ - + / - 12 dB at

100Hz Mid / Treble 2 KHz / 10 KHz (g) Outputs, Line Output Line Output Low : -

dB / -2 dBM Line Output High : 0 dBM / +17 dBM (775 mv / 5.5 V ) (h) S/N ratio

Line Output Level : > 70 dB (0 dB, 0.775V) The Console shall be mounted on

standard Rack, The channel of following numbers.

(B) 9 Channel Audio Mixer with ECHO

Supplying microphones stands with sturdy mechanism, treble free movement &

positioning of microphones, free from rust with superior quality of chrome plating

with following size. [Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

(c)Fixed height 91 cms. & extendable up to 62 cms. with round base of dia. 23 cms.

Supplying , installing & testing approved make Microphone for Speech, Music, &

Close to lip singing with inbuilt protection against breath & wind noise with

capability to capture sound from long distance & wide area with frequency

137 response 50 - 16000 Hz, having sensitivity 1.8mv / Pa & impedance 430 ohms(Lo - Ea. 4.00 ₹ 2,654.28 ₹

Z) supplied with quick detachable holder, 6 Mtr long. Twin core cable & 3 pin XLR

connector. [[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

Supplying & testing wireless microphone system for 92.5 MHz FM operation With

effective range 200 feet with microphone having facility for frequency adjustment

138 & receiver with LED indicator Telescopic antenna with battery cells.[[Approved by Ea. 2.00 ₹ 1,884.66 ₹

Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Power amplifier, 480W

High‑efficiency professional Class‑D power amplifier, minimum 480 W continuous

at 100 V line for distributed PA / auditorium loudspeakers, operating on 230 V,

Hz AC. Unit shall provide balanced line‑level input with input gain control, 100 V

(and 70 V / low‑Z where available) outputs, clip/signal/power status indication,

and protections for overload, short circuit, DC at output, over‑temperature and

mains surge. Amplifier shall be 19‑inch rack‑mountable with adequate cooling and

shall comply with relevant safety and EMC standards, approved by Competent

Authority not below the rank of Executive Engineer.

SITC of Cabinet loudspeaker, 30W, black High-fidelity music and speech

reproduction Selectable 8 ohm, 70 V and 100 V inputs Compact yet robust ABS

enclosure Supplied with adjustable mounting bracket Complies with international

installation and safety regulations [Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

Supplying and erecting approved make surge/spike suppressor having 3 out lets of

1.8 AMP each complete erected.

Supplying and erecting approved make Single phase power conditioners suitable

for input voltage 180V / 280V, output voltage 220V (+ / - 10%) AC 50 ‘Hz with

electronic relays & component of housed in sheet metal cabinet ‘with epoxy

powder coated, with high - low cutoff, time delay, voltmeter, selector switch, 5/15

A universal socket with range off

Fabricated steel equipment rack / cabinet for auditorium sound system,

floor‑standing, minimum internal usable height 24U, suitable for mounting

mixer‑amplifier, power amplifier, music source, UPS and accessories, made from

minimum 16G CRCA sheet with ventilated front door, rear access door, side

ventilation louvers, cable entry at rear/bottom, provision for earthing,

powder‑coated finish, complete with necessary angle supports, hardware, and

base frame, approved by Competent Authority not below the rank of Executive

Projector (short throw) - Epson EB-L210SF & BenQ AH700ST

Multimedia projector (short throw, LCD/DLP technology) with native resolution

1920×1080 (Full HD), minimum brightness 4000 lumens and contrast ratio

minimum 5,00,000:1, laser light source with minimum life of 20,000 hours in

normal mode, short throw ratio approximately 0.45–0.9 with zoom facility,

manual/automatic keystone correction, inbuilt speaker of minimum 10 W,

multiple input/output ports including minimum 2×HDMI, RGB input, audio in/out,

video input, USB Type-A and Type-B, Wi-Fi connectivity, wireless screen sharing

144 and LAN port, suitable for 210–240 V, 50 Hz supply with maximum power Ea. 1.00 ₹ 1,31,350.00 ₹

consumption not exceeding 300 W, noise level not exceeding 38 dB in normal

mode, BIS registered under CRS of MeitY, with minimum 3-year on-site warranty

for projector and minimum 3 years or 12,000 hours warranty for light source, and

the rate shall be inclusive of supplying, fixing/installation, testing, commissioning,

making the system operational and providing necessary on-site training to the end-

user staff in operation and basic troubleshooting of the projector, complete as

Supply, providing, installation, testing & commissioning of automatic motorized

projector screen, 150 inches diagonal, 16:9 aspect ratio, suitable for front

projection, with high-quality matte white projection fabric/screen surface suitable

for Full HD/UHD/4K and 3D projection, with black masking/border and black

backing for improved image contrast and prevention of light penetration. Screen

shall be provided with suitable metal/aluminium casing/enclosure and electrically

operated motorized roller mechanism, complete with limit switches for smooth

and reliable up/down operation, operated through wired wall switch and/or

wireless remote control. The screen shall be suitable for wall or ceiling mounting

as per site conditions, operate on 230 V AC supply, and be complete with all

necessary mounting brackets, hardware, electrical connections, accessories and

fixing arrangements. The work shall include installation, testing, commissioning

and performance verification of the complete system, including demonstration

and user operation instructions, all as per manufacturer's specifications, drawings

and directions of the Engineer-in-Charge. The complete system shall be covered by

a minimum 1 year warranty against manufacturing defects and workmanship from

the date of commissioning.

SITC of universal Projector mounting kit, with necessary grouting, fasteners etc.

with adjustable height and suitable for all types of projectors. [Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ]

Supply, Installation Testing & Commissioning 15 Mtr. HDMI Interface Cable as per

147 the detailed Specifications supports transmission of 4K Signals as per the detailed Ea. 1.00 ₹ 1,777.60 ₹

Supplying & erecting recess wall mounting speaker with 5W rated input power

K. Ohms / 3W impedance, 100 - 10000 Hz frequency response with 6 inch dia.

cone type 8 ohms speakers duly fitted in ABS plastic cabinet of colour match with

wall or ceiling of following size. [[Approved by Competent Authority i.e. not Below

the rank of Executive Engineer ] (a)Round Shaped, 230mm dia. Speaker