Loading…
Loading…
Tender ID
Tender Value
₹56.8 L
EMD Value
₹56,637
Closing Date
8 Jun 2026, 10:00 pmClosed
Karnataka Neeravari Nigam Limited
GURURAJ C
Improvements to Distry 14A of RBHLC from km 0.002 to 1.50 by constructing RCC Trough, CD Works, Pipe Outlets and Drops passing Ballari CMC.
KNNL/2025-26/IW/WORK_INDENT3091/CALL-2
KNNL/2025-26/IW/WORK_INDENT3091/CALL-2
Reserved
Irrigation and Other Works
Two Tender Document System(Two Cover)
KNNL Division Canal Div No 6 Bellary
11 documents required · 11 mandatory
The intending bidder should have satisfactorily completed as a prime contractor for at least any construction work to an extent of 25% of the cost of work of value not less than Rs.16.71 Lakhs during the last five years. (2020-21 to 2024-25). The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer of the concerned division. The cost of the work executed in the previous years shall be updated to 2025-26 at 10% per annum
The intending bidder should have executed in any one year the following minimum quantities of work (usually 50% of the peak annual rate of construction) during the last five years (2020-21 to 2024-25). The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer.Concrete M15 and Above-231.26 cum, Steel-6.48Tonne,Embankment ( CNS / gravel)-834.78 cum
A copy of the KPWD Class-III&aboveContractor Registration Certificate with validity.(Activein period)
Category II (A) Category Contractors should upload a scan copy of Caste Certificate Issued by Competent Authority and should submit the hard copy of original Caste Certificate for verification
Category II(A) Category Contractors should upload a copy of Domicile/residential Certificate issued by Competent Authority and should submit the hard copy of original Domicile/residential Certificate for verification
Liquid asset and/or availability of credit facilities of not less than for Rs.20.05 Lakhs, (unconditional credit lines/ letters of credits / certificates from nationalized banks) for meeting the fund requirement etc. The contractor should upload necessary documents issued by the nationalized banks in prescribed format
Bid Capacity -Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under - Assessed available tender capacity- AxNx5.0-B
Latest copy of the Income tax returns (ITR-V) filed dulymentioning PAN numberfor the Financial year 2024-25 (Assessment Year 2025-26).
To qualify for award of this contract each tenderer in his name should have in the last five years period achived in atleast One financial year a minimum financial turnover of Rs.66.83 Lakhs, during the last five years (2020-21 to 2024-25), audited profit and loss account certified by a practicing Chartered Accountant ,Duly mentioning UDIN on Turnover certificate (from CA). The Annual turnover of Pervious Year shall be updated to 2025-26 at 10% per annum
Copy of Valid Employees Provident Fund Registration Certificate.
Copy of Valid GST Registration Certificate
₹1,430
₹56,637
21 May 2026
21 May 2026
9 Jun 2026
29 May 2026
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness by mechanical means using dozer light jungle Complete as per the direction of Engineer incharge to the work.
Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other ancillary operations complete. In Dry condition Complete as per the direction of Engineer incharge to the work.
Dismantling of existing structures like culverts,bridges,retaining walls and other structures comprising of masonry,cement concrete ,wood work ,steel work including T & p Scaffolding whereever necessary,sorting the dismantled material disposal of unservicable materials and stacking of servicable materials with all lifts and lead complete as per specifications and directions of the Engineer in charge of work.Morth Specification No 202 Rubble masonry by Mechanical means Complete as per the direction of Engineer incharge to the work.
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 40 mm nominal size graded crushed coarse aggregates,Complete as per the direction of Engineer incharge to the work.
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates) complete as per specifications and as per directions of Engineer-in-charge.
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates) complete as per specifications and as per directions of Engineer-in-charge.
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, complete as per specifications and as per directions of Engineer-in-charge.
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (COMMON SR 2023-24, Vol-1, Sl.No.2.5.2, P.No 16),, complete as per specifications and as per directions of Engineer-in-charge.
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification 2.11.f (Canal & Allied Works),Complete as per the direction of Engineer incharge to the work.
Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift service gate consisting of skin plate, vertical and horizontal girders, wheels, stiffeners, lifting brackets, guide rollers, ballast blocks, teflon claded rubber seals with all accessories for river sluice /canal sluice vent including cost of all materials,machinery,labour, cutting, aligning, welding, finishing, cleaning, applying one coat of zinc rich epoxy primer and three coats cold applied coal tar epoxy paint, seal fixing and all other ancillary operations complete as per specifications and approved drawings.Complete as per the direction of Engineer incharge to the work.
Filling avilable excavated earth(excluding rock )in trenches,plinth,sides of foundations and other similar works etc.in layers not exceeeding 20cm in depth ,consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5mm complete as per directions of Engineer incharge of work
Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction ) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness,sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations complete as per the direction of Engineer incharge to the work.
Providing and laying Reinforced Cement Concrete pipe light duty NP2 for culverts, roadway utilities & crossings as per IS 458:2003 in Single row including pointing ends and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications.Complete as per the direction of Engineer incharge to the work. (a.300 mm dia)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
3091 specifications.pdf
Others - specifications • 0.64 MB
BOQ 3091 CALL 2.xlsx
Others - BOQ • 0.01 MB
3091 Bid Document -CAT2 CALL 2.docx
Tender Document • 10.25 MB
3091 Drawings.pdf
Others - Drawings • 1.98 MB
tender Notification 3091 CALL 2.docx
Others - Tender notification • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .