Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.7 LAccepted-AOC | L1 | Accepted-AOC accepted | |
| 2 | L2₹2.8 L+₹8,570 (3.18%)Rejected-AOC | L2 | Rejected-AOC accepted |
Tender Value
Refer Docs
EMD Value
₹7,490
Closing Date
27 Sept 2022, 3:00 pmClosed
Executive Engineer
Executive Engineer Electronics Division Thrissur
SITC of LAN system in the office of the District Consumer Disputes redressal Forum Thrissur
2022_PWD_508822_1
38/EEELCSTSR/2022-23
Open Tender
Miscellaneous Works
Item Rate
30 days
Thrissur District
Please refer Tender documents.
6 documents required · 6 mandatory
₹660
₹7,490
10 Nov 2022
19 Sept 2022
29 Sept 2022
19 Sept 2022
27 Sept 2022
19 Sept 2022
19 Sept 2022 - 27 Sept 2022
Amount
PART A
28 port manageable Layer 3 Gigabit Rackmountable network Switch having 24 x 10/100/1000 Gigabit Ethernet ports,2 x Gigabit Ethernet combo + 2 SFP for higher bandwidth connection with all necessary accessories, 5 year onsite replacement warranty. (Model: Cisco SG350-28/ equivalent )
CAT 6, 24 port patch panel, (Make:Molex/ equivalent )
CAT 6, 1Mtr patch cord.(Make:Molex/ equivalent )
CAT 6, 3Mtr patch cord. (Make:Molex/ equivalent )
19’’ 9U wall mountable rack with covered wire manager, AC distribution box, one no of tray, cooling fan and accessories . (Make: Valrack/Netrack )
CAT 6 information outlet in recess/on surface as per site requirement with spring shutter front access. (Make: Molex/opterna )
CAT 6 UTP cable through conduit / cable management system. (Make: Molex/opterna)
Supply and fixing of 25 mm PVC conduit/ cape-n-case of approved model, with specials conforming to ISI standard in recess using suitable size fixtures, spacing not exceeding 60cm including making good the damages, colour washing etc.
Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the all necessary accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.
EPABX :Supply, Installation, testing and Commissioning of digital EPABX system having 4 trunk lines, 20 extensions, with suitable fixing arrangement and making necessary connections. Warranty 5 year onsite (Make: Syntel NEOS DX or equivalent)
Supply and Installation of installation of Telephone with CLI facility (Make: Panasonic KXT 625X / equivalent)
Supply and Installation of Analogue phones (DTMF) with glass epoxy coated printed board. (Make: Panasonic KXT 500MX/ equivalent)
Supply and Installation of 600VA full load UPS with 1 year on site warranty. (Make :V-Guard or Equivalent)
Supply, installation and testing of 20 pair Telephone Junction Box with KRONE connecting modules in a suitable M.S enclosure with Powder Coated paint of approved colour and lock & key arrangement on wall with suitable fixing arrangement and making necessary connections.
Supply and installation of P&T lightning protector unit with suitable fixing arrangement and making necessary connections
Supply, Installation, Testing & commissioning of RJ11 Rosset box of approved make in good quality, in wall / column / wooden panel with shutter arrangement front plate to match the interior arrangement & making necessary connections, fixing arrangement.
Supply and fixing of 20mm PVC conduits/ cape-n-case of approved model, with specials conforming to ISI standard on surface using suitable size fixtures, spacing not exceeding 60cm including making good the damages, colour washing etc
Supply and laying of 2 Pair PVC Telephone Cable of conductor size 0.51mm ATC Copper in the existing cable trays / PVC conduits / Oval Conduits / casing-n-caping etc. as required.
Earth lead supply and drawing 10 SWG bare copper conductors on the wall with necessary clamps with a spacing not exceeding 1 meter with necessary connections as required and tin plating on all ends and joints.
Supply and providing pipe earthing as per IS 3043 with 3.60m long 40mm dia B class GI pipe, GI funnel with weld mesh, filling required quantity of charcoal & salt including construction of inspection chamber with a bed concrete of 1:4:8PCC using 40mm broken stone (10cm thick), brick work in cement mortar1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar1;4,12mm thick, (the finished inside dimension shall be 300x300x300mm)including test joint, cast iron gully trap .).
Power Amplifier, 120W RMS with 5 Mic & 2 Aux inputs, Frequency response: 50-15000Hz, Speaker outputs: 4,8,16 ohms, 70 & 100V, with suitable fixing arrangement, making necessary connections as required. (Make: AHUJA SSB 120 or Equivalent)
Wall mount Speaker of 20W works on 100V line with power taps of 20W / 10W / 5W / 2.5W/8 Ω with suitable fixing arrangement, necessary for making connections with all required accessories. (Make: Studiomaster ARC 20 or Equivalent)
Anti Mobile and RF interference Cardiodic 21” gooseneck Back Electret condenser microphone with Microphone Base with On/Off Switch & LED having Built-in XLR socket, Frequency response of 20Hz to 20KHz with all necessory accessories. (Make: Studiomaster Flex4/ equivalent)
Phantom power supply for microphone. (Make: APS 302/Equivalent)
10m XLR cable with necessary connectors
Dynamic Handheld Microphone having frequency response: 50-15000Hz, Sensitivity: -50dB-/+3dB, Impedence:350 ohms, with MIC holder, 6.5M XLR Cable and all other accessories. (Studiomaster XM 500XLR/ equivalent)
Custom made 19'' 12U or above Amplifier Rack with power distribution box and all other required accessories.
Supply and Installation of PA microphone floor stand. (Ahuja DGN)
20mm PVC conduits/ cape-n-case of approved model, with ISI standard on surface using suitable size fixtures, spacing not exceeding 60cm including making good the damages, colour washing etc
Supply and laying of 1.5 Sq.mm twin wire speaker cables in the existing conduit. Make:Finolex
Providing Power connection for Amplifier Rack
BLUEBLAZE SYSTEMS AND SERVICES PVT LTD
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_728728.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .