Special Repairs to Police Staff Qtrs. B-Cat. Block No-15 Ground Floor (Qtr. No 61 to 64) And Fixing Of Alluminium Section Window (Three Track) In Block No-15 First and Second Floor (Qtr. No 65to 72) in SRP GR-VIII at Gondal, Dist:- Rajkot (Including Electric Work) (SBD) (4th Attempt)

No Quantity Rate Rs. in words Rs.

(A) CIVIL WORK:

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats Rupees One Hundred Ninety

1 architraves, holdfasts and other attachment etc. complete and stacking them within all lead 80.00 Each 199.24 Nine and Paisa Twenty Four

and lift.(ii) Not Exceeding 3 Sq.M. in area. Only

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas Rupees Fifty and Paisa

2 and disposal of unserviceable materials with all lead and lift. 192.00 Sqmt 50.94

Ninety Four Only

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps Rupees Seventy Nine and

3 including stacking the materials with all lead and lift ( for any dia, of pipe) 42.00 Rmt 79.53

Paisa Fifty Three Only

Dismantling Sanittary fitting like wash basin, W.C. pan indian and europion type,

flushing tank etc. including staking the material with all lead and lift.

Rupees Four Hundred Twenty

Nine and Paisa Sixty Six Only

Dismantling existing plaster racking out joints and cleaning the surface for plaster at all Rupees Twenty and Paisa

5 heights including disposal of rubbish to the dumping ground within of any lead. 400.50 Sqmt 20.63

Sixty Three Only

Demolition including stacking of serviceable materilas and disposal of unserviceable Rupees One Thousand One

6 materials with all lead and lift. (i) R.C.C. work 2.50 Cum. 1122.66 Hundred Twenty Two and

Paisa Sixty Six Only

Providing and laying cement concrete 1:5:10 ( 1 cement ; 5 coarse sand; 10 M/C stone Rupees Two Thousand Five

7 aggregates 40mm nominal size) and curing complete excluding cost of form work in 12.00 Cum 2551.57 Hundred Fifty One and Paisa

Foundation and Plinth. Fifty Seven Only

Providing 10mm. thick cement plaster in single coat on ceiling for interior plastering and

finished even and smooth in C:M 1:3 (1 cement; 3 sand) including finishing with a floating Rupees Two Hundred Twenty

coat of neat cement slurry AT GROUND FLOOR. and Paisa Four Only

Providing 10mm. thick cement plaster in single coat on ceiling for interior plastering and Rupees Two Hundred Fourty

9 finished even and smooth in C:M 1:3 (1 cement; 3 sand) including finishing with a floating 33.00 Sqmt 247.76 Seven and Paisa Seventy Six

coat of neat cement slurry AT FIRST FLOOR. Only

Providing 10mm. thick cement plaster in single coat on ceiling for interior plastering and Rupees Two Hundred Seventy

10 finished even and smooth in C:M 1:3 (1 cement; 3 sand) including finishing with a floating 39.00 Sqmt 275.48 Five and Paisa Fourty Eight

coat of neat cement slurry AT SECOND FLOOR. Only

Providing 15 mm. thick cement plaster in single coat on wall for interior plastering and Rupees Two Hundred

11 finished even and smooth in C:M 1:4 (1 cement; 4 sand) including finishing with a floating 153.00 Sqmt 219.70 Nineteen and Paisa Seventy

coat of neat cement slurry AT GROUND FLOOR. Only

Providing 15 mm. thick cement plaster in single coat on wall for interior plastering and

finished even and smooth in C:M 1:4 (1 cement; 4 sand) including finishing with a floating Rupees Two Hundred Fourty

coat of neat cement slurry AT FIRST FLOOR. Nine and Paisa Fifty Only

Providing 15 mm. thick cement plaster in single coat on wall for interior plastering and

finished even and smooth in C:M 1:4 (1 cement; 4 sand) including finishing with a floating Rupees Two Hundred Seventy

coat of neat cement slurry AT SECOND FLOOR. Nine and Paisa Thirty Only

Providing 20mm thick SAND FACED cement plaster on walls above ground level consisting Rupees Three Hundred Twenty

12mm thick backing coat of C:M 1:3 (1 cement; 3 sand) and 8mm thick finishing coat of C:M

14 106.00 Sqmt 327.45 Seven and Paisa Fourty Five

1:1 (1 cement; 1 sand) etc. complete for any height.(Gutka Plaster)

Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring over

mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface orfixing

on existing flooring by adhesive including dismentaling of existing flooring and material jointed Rupees One Thousand Seven

15 with color cement slurry including finised with flush pointing & cleaning the surface 119.50 Sqmt 1793.53 Hundred Ninety Three and

etc.Completed Brand of the tiles shall be as per approved make list of GSPHCL. Shade & Paisa Fifty Three Only

Size of tiles shall be as specified in tender item.

Providing & Laying 24" x 24" in Skirting riser of steps and dado Double Charge vitrified

to 10 mm thick tile over 10 mm thick Cement plaster of cement mortar 1:3 (1 cement: 3 Rupees One Thousand Four

coarse sand) jointed with color cement slurry including finised with flush pointing & cleaning

16 15.00 Sqmt 1445.19 Hundred Fourty Five and Paisa

the surface etc. complete Brand of the tiles shall be as per approved make list of GSPHCL.

Shade & Size of tiles shall be as specified in tender item. Nineteen Only

Providing and Fixing Granite of Telephonic Black Colour 15 to 18mm thick for jambs and

sills of doors & windows using neat cement slurry laid over 20 mm average base of cement

mortar 1:1 (1 cement:1 Coarse Sand) and jointed with grey cement slurry including racking Rupees Two Thousand Four

17 (Tancha Work) rubbing and polishing, scaffoldings, tools and tackles, scaffolding etc. 57.00 Sqmt 2427.83 Hundred Twenty Seven and

complete. (with base of neat cement) as per direction of Engineer in charge including Paisa Eighty Three Only

rounding the exposed edges as directed etc. Complete for ALL FLOORS.

Providing and fixing both side prepolished single piece machine cut 25mm thick KOTA

STONE shelve/ partition, 20mm to 25mm embedded in to wall at support including racking Rupees Five Hundred Eighty

and finishing smooth the surface including cutting the stone as and where required etc. Nine and Paisa Fifty Only

complete including moulding of exposed edges etc. complete.

Providing and laying 25mm thick polished KOTAH STONE SLAB FLOORING over 20mm

average thick base of cement mortar 1:6(1 cement; 6 coarse sand) over and jointed with grey Rupees One Thousand Nine

cement slurry including rubbing and polishing etc. complete for All floors. and Paisa Thirty Only

Providing and laying polished polished Kotah stone 25mm thick in risers of steps dedo and Rupees One Thousand One

20 skirting, and pillars laid on 10mm. thick C:M 1:3 (1 cement; 3 coarse sand) jointed with grey 1.50 Sqmt 1186.77 Hundred Eighty Six and Paisa

cement slurry including rubbing and polishing etc. complete Seventy Seven Only

Polishing Of old polished KOTAH STONE SLAB FLOORING to remove rough surfaces and

Rupees Sixty Four and Paisa

21 making smooth, jointed with grey cement slurry etc. complete for All floors. 114.00 Sqmt 64.56

Fifty Six Only

Providing & laying 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by Rupees One Thousand Four

22 adhesive material including dismentaling of existing flooring and jointed with color cement 12.50 Sqmt 1458.33 Hundred Fifty Eight and Paisa

slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit Thirty Three Only

Size-600 X 600mm

Providing & laying Printed / Coloured GLAZED TILES 8 mm thick in skirting, risers of steps Rupees One Thousand One

23 and DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & jointed with 48.50 Sqmt 1116.32 Hundred Sixteen and Paisa

white cement slurry. Size 300 x 600mm Thirty Two Only

Providing and fixing Alluminium section window having extruded Aluminum Colour anodized

section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of

0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal

Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of

Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size Rupees One Thousand Nine

24 40mm x 18mm x 1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of 41.50 Sqmt 1902.50 Hundred Two and Paisa Fifty

size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt) with 5 mm Only

thick transparent bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details including one

mosquitoe jali shutter With Both Side Locking Arrangment for ALL FLOORS.

Providing and fixing standard extruded of alluminium section of size 63.50 mm x 38.10mm x

Rupees One Thousand One

1.01mm (Jindal section :20033,@ Wt.0.593kg/Mt) with colour anodized alluminium frame for

25 6.00 Sqmt 1163.92 Hundred Sixty Three and Paisa

ventilation with 5 mm thick frosted glass as fetails etc complete for ventilation.

Ninety Two Only

Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm

for stiles and 15mm x 15 mm for top and bottom rails. M.S. frame shall have a coat of steel

primers of approved make and manufacture, M.S. frame shall be covered with 5 mm thick

heat moulded PVC ‘C’ channel of size 30 x 50 mm forming stiles, and 5mm thick 75mm wide

PVC sheets for top rail, lock rail and bottom rail on either side, and 10mm (5mm x 2) thick, Rupees One Thousand One

26 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, Panelling of 5 stiles 12.00 Sqmt 1135.02 Hundred Thirty Five and Paisa

and rails with 30mm wide x 5mm thick PVC sheet beading on eighter side, and joined Two Only

together with solvent cement adhesive,. An additional 5mm thick PVC strip of 20mm width

is to be stculk on the interior side of the ‘c’ channel using PVC solvent cement adhesive etc.

complete as per direction of Engineer in charge, manufacture’s specification and drawing.

Providing and fixing factory made polyvinyl chioride (PVC) door frame of the size

x 47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam

sheet, mitre out of two corners and joined with 2nos. of 150mm long brackets of 15 x

15mm M.s. Square tubes. The two vertical door profiles are to be reinforced with

x 19 mm m.s. square tube of 19 gauge, EPDM rubber gasket weather seal to be Rupees Three Hundred

27 provided through out the frame. The door frame shal be fixed to the wall using 12.00 Sqmt 314.88 Fourteen and Paisa Eighty

65/100 mm long M.S. screws through the frame by using PVC fasteners. A Eight Only

miniumum of 4 nos. os screws to be provided for each vertical members and minium

2 nos. for horizontal members etc. complete as per manufactures specification and

direction of Engineer in charge.

Removing and refixing after repairing door,window,cup board,ventilator shutter & repair Rupees Three Hundred Twenty

28 frame with providing necessary wood corner M.S. plate support,hinges etc.complete. 38.00 Sqmt 321.78 One and Paisa Seventy Eight

Providing CEMENT VATA ( 10 cm. x 10 cm. )size quarter round in cement mortar 1:1 Rupees Twenty Four and Paisa

29 including neat cement finishing, watering etc.complete 59.00 Rmt 24.04

Providing and Laying Water Proofing Chemical treatment in two coats of vertical and

Rupees Eighty Four and Paisa

30 horizontal surface of DR Fixit SBR Latex or its equivalent as directed by engineer in 246.00 Sqm 84.29

charge.This treatment shall be carried out over & above China Mosaic Twenty Nine Only

Celling painting (two coats) with plastic emulsion paint and manufacture on undecorated wall

surface to give an even shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth With Applying two coats of Fine

Rupees One Hundred Ninety

31 Putty & One coats of primer and manufacture on new wall surface to give an even shade 402.50 Sqmt 196.17

including thoroughly brushing the surface free from mortar dropping and other foreign matter Six and Paisa Seventeen Only

and sand papered smooth. paint, primer and putty shall be as per approved make list of

Wall painting (two coats) with plastic emulsion paint and manufacture on undecorated wall

surface to give an even shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth With Applying two coats of Fine

Rupees One Hundred Eighty

32 Putty One Coat of Primer and manufacture on new wall surface to give an even shade 698.50 Sqmt 185.40

including thoroughly brushing the surface free from mortar dropping and other foreign matter Five and Paisa Fourty Only

and sand papered smooth.paint, primer and putty shall be as per approved make list of

Finishing wall with Weather proof exterior emulsion paint on wall surface (Two Coat) over and

above applying one coat of primer to give an required shape even shade after throughly

Rupees One Hundred Fifty

Brushing This surface to remove all Dirt and remains of loose poweder material etc.

33 879.00 Sqmt 155.21 Five and Paisa Twenty One

complete. Primer shall be exterior weather coat and Paint shall be Appex Weather Proof

Emulsion Only Paint and primer shall be as per approved make list of GSPHCL. Only

Painting Two coats (excluding priming coat) on previously painted steel and other metal

Rupees One Hundred Two

34 surface with enamel paint, brushing, to give an even shade including cleaning the surface of 7.50 Sqmt 102.41

and Paisa Fourty One Only

all dirt, dust and other foreign matter.

Painting Two coats (excluding priming coat) on previously painted wood and wood

based surface with enamel paint, to give an even shade including cleaning the of all dirt,

Rupees One Hundred

dust and other foreign matter. Eighteen and Paisa Nine Only

Providing & fixing to Concealed center point to wall, ceiling & floor CPVC ( SDR 13.5 ) PIPE

having National Sanitation foundation ( NSF ) seal for potable water of following dia nominal

Rupees Two Hundred Six and

36 bore tube fitting and clamps including of making good the wall ceiling & floor etc. Complete 11.50 Rmt 206.73

Paisa Seventy Three Only

(excavation of earth in trenches and filling will be paid separately)[B] 20 mm

Providing & fixing to Concealed center point to wall, ceiling & floor CPVC ( SDR 13.5 ) PIPE

having National Sanitation foundation ( NSF ) seal for potable water of following dia nominal

Rupees Two Hundred Fifty

37 bore tube fitting and clamps including of making good the wall ceiling & floor etc. Complete 27.00 Rmt 251.31

One and Paisa Thirty One Only

(excavation of earth in trenches and filling will be paid separately)[C] 25 mm

Providing & fixing to Concealed center point to wall, ceiling & floor CPVC ( SDR 13.5 ) PIPE

having National Sanitation foundation ( NSF ) seal for potable water of following dia nominal Rupees Three Hundred Thirty

38 bore tube fitting and clamps including of making good the wall ceiling & floor etc. Complete 27.00 Rmt 334.89 Four and Paisa Eighty Nine

(excavation of earth in trenches and filling will be paid separately)[D] 32 mm Only

Providing & fixing to Concealed center point to wall, ceiling & floor CPVC ( SDR 13.5 ) PIPE

having National Sanitation foundation ( NSF ) seal for potable water of following dia nominal Rupees Four Hundred Fourty

39 bore tube fitting and clamps including of making good the wall ceiling & floor etc. Complete 67.50 Rmt 443.29 Three and Paisa Twenty Nine

(excavation of earth in trenches and filling will be paid separately)[E] 40 mm Only

Providing & fixing to Concealed center point to wall, ceiling & floor CPVC ( SDR 13.5 ) PIPE

having National Sanitation foundation ( NSF ) seal for potable water of following dia nominal

Rupees Six Hundred Fifty Four

40 bore tube fitting and clamps including of making good the wall ceiling & floor etc. Complete 8.50 Rmt 654.04

and Paisa Four Only

(excavation of earth in trenches and filling will be paid separately)[F] 50 mm

Providing and Fixing to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of

90mm Dia Complete with Special flings, Compressor type Fittings, Wall clips on wooden patty

Rupees Three Hundred Twenty

including making good the ceiling and floor on terrace rain water pipe shall be 90 mm Dia.

41 90.00 Rmt. 325.27 Five and Paisa Twenty Seven

SWR horizontal pipe and vertical pipe and 90mm bend at the end near by Ground level rate

are Inclusive of all Necessary Fittings G.I. Slotted Z Patti ( Minium 1.6 mm thick ) With Only

Minumum 6mm Dia Etc.. required.

Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste pipe with "O" ring of

ISI13592/92, Rate inclusive of all fittings like single or double "Y" with door, reducer, coupler Rupees Two Hundred Sixty

42 single T with door bend, pipe clip on G.I. Slotted Z Patti ( Minium 1.6 mm thick ) With 49.00 Rmt 264.97 Four and Paisa Ninety Seven

Minumum 6mm Dia etc.complete and making good the wall ceiling and floor. (A) 75mm dia Only

Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste pipe with "O" ring of

ISI13592/92, Rate inclusive of all fittings like single or double "Y" with door, reducer, coupler Rupees Four Hundred Ninety

43 single T with door bend, pipe clip on G.I. Slotted Z Patti ( Minium 1.6 mm thick ) With 29.00 Rmt 495.91 Five and Paisa Ninety One

Minumum 6mm Dia etc.complete and making good the wall ceiling and floor. (B) 110mm dia Only

Provinding and fixing in position PVC COWEL VENT to pipe 75 mm dia directed. Rupees Sixteen and Paisa

Fourty Seven Only

Provinding and fixing in position PVC COWEL VENT to pipe 110 mm dia directed. Rupees Twenty Eight and

Paisa Sixteen Only

Providing and fixing U.PVC/SWR nahni trap of the following nominal dia self cleaning Rupees Five Hundred Ninety

design with top tile and strainer including cost of cutting and making good the wall and floors

46 12.00 Each 595.98 Five and Paisa Ninety Eight

100mm inlet and 50mm outlet including 150mm x 150mm stainless steel jali.

Providing and Fixing. S.W.Gully trap without C.I.grating brick masonry chamber & water tight Rupees One Thousand One

47 C.I.cover frame of 300mm x 300mm size (inside) with standard weight (I) square mouth trap 8.00 No 1176.94 Hundred Seventy Six and

150mm x 100mm size of 'P' or 'S' type. Paisa Ninety Four Only

Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class SN8 Structured Wall

polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring)

with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall)

for non-pressure underground Sewerage & Drainage application as per EN:13476-3 including

all local and central taxes, transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to the departmental stores etc. complete. (100mm ID Dia) Including

Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated &

Smooth Internal surface) Polyethylene Piping and fittings with the help of coupler ( on line / off

Rupees Two Hundred Twenty

48 line ) attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed 10.00 Rmt 229.00

on the specified valley of the corrugation at the spigot end, lowering the same into the trench,

laying on the lower bedding (constructed at bottom of trenches) at prescribed gradient,depth

& alignment ,testing the water tightness of the joints, ensuring the continuity tests of specified

pipe segments etc. complete as per drawing,specifications & detailed engineering, including

carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of

Engineer-in-charge.

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia.

Rupees Six Hundred Fifty Six

and Paisa Eighty Six Only

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 50mm dia. Rupees Two Thousand Three

50 2.00 Each 2302.33 Hundred Two and Paisa

Thirty Three Only

Providing & Fixing 15mm One way BIB Tap with wall flange Rate are inclusive of all material

,Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as Rupees Nine Hundred Ninety

per the instruction of Engineer incharge. The model & Make of bib tap shall be as per the and Paisa Sixty One Only

approved Make List of GSPHCL

Providing and fiixng water closet squatting pan (ORISSA TYPE W.C. PAN) size 580 mm first Rupees One Thousand Three

52 quality including necessary 'P' or 'S' trap including jointing the trap with pan & soil pipe in 4.00 Each 1354.44 Hundred Fifty Four and Paisa

cement mortar 1: 1 (1 cement : 1 sand ) in vitreous china white colour. Fourty Four Only

Providing and fixing Wash Basin shall be as per the approved Make List of GSPHCL single

hole for piller tap with C.I or M.S. brackete painted white including cutting holes and making

good the same but including fitting (A) Vitreous chaina :(II ) Flat back wash basin 515mm x

410mm size in white colour including provinding and fixing C.P. brassa waste coupling 32mm

dia P.V.C water pipe M. I . fisher union 32mm dia C.P brass Pillar Cock 15mm dia shall be Rupees Two Thousand Nine

53 as per the approved Make List of GSPHCL Complete including PVC connection pipe from 4.00 Each 2986.58 Hundred Eighty Six and Paisa

STOP COCK Heavy Duty with Exposed part and other accessories 15mm dia shall be as per Fifty Eight Only

the approved Make List of GSPHCL to pillar tap and 32mm dia waste pipe up to N.T etc.

Complete. with 40mm dia c.p brass waste and M.I fisher and 15mm dia pillar cock.

Constructing brick masnory chamber for under ground C.I.Inspection chamber and bends

with Brick having crushing strength not less than 35 Kg/Sq.cm.in cement mortar 1:5,RCC top

slab with1:3:6 in cement mortar 1:5 ( cover with 8 mm dia. steel @ 15 c/c and R.C.C. top

slab with 1:2:4 mix ( 1 cement : 2 coarse sand,4- stone aggregates 20mm nominal size)

foundation cocrete 1:5:10 inside laster 15 mm th. c:m 1:3 finished smooth with a floating coat Rupees Three Thousand

54 of neat cement on walls & bed concrete etc. complete. Rate are also inclusive of outside 2.00 Each 3793.18 Seven Hundred Ninety Three

plaster 15mm thick in C.M 1:3 from top of chamber and all side upto 45cm deep below and Paisa Eighteen Only

ground level (I) inside dimensions 455mm x 610mm and 450mm deep for Single or multi

purpose pipe line. Rate Also Inclusive RCC Frame with cover MD 10 ton (Rubber mould

Finish) Inner Size 600 x 450mm with all necessary fittings

Extra over above item for every additional depth of 0.1mtr. or part thereof beyond 450mm Rupees Two Hundred Thirty

55 depth for Brick masonry chamber. 4.00 Each 239.99 Nine and Paisa Ninety Nine

Providing,fabricating and fixing of M.S. grill/Gate of approved pattern fabricated from M.S.flat

, square bars, round bars,C-channel, box pipe as per detail Drawings.Rate is inclusive of

welding with grinding smooth surface ,two coat of Oil paint and one coat of yellow Zink

Rupees Seventy Three and

56 chromate primer coat of approved brand only.Oil paint shall be Luxol Enamel paint of Berger 554.50 Kg 73.94

Paint India Ltd. or Asian paint Apcolite premium gloss Enamel of Asian paint or Dulux Paisa Ninety Four Only

premium gloss enamel of Dulux paint Only M.S. grill/Gate material Structural steel should be

ISI Mark only.

57 Credit value for old G.I. Pipe of any dia meter and removed from site and clean site. 41.50 Rmt -11.00 Rupees Eleven Only -456.50

Credit Value for Door Shutter, Cupboard shutter and removed from site and clean site. Rupees Two Hundred Fifty

Total Civil(A) =

(B) Electrical WORK:

59A Providing and erecting Point wiring with approved 1.1 KV Grade ISI mark 1.5 mm2 45.00 Point 382.00 Rupees Three Hundred Eighty

copper FRLS PVC insulated wire with 1.5 mm2 copper FRLS PVC insulated wire for Two Only

earth continuity in 25/32 white approved make press fit casing capping with double

locking arrangement with grooves, trunking of size not below 10/12 mm in height

IS:14927 ISI Part –II and with approved make white accessories like inside and

outside coupler, elbow, tee, junction boxes etc. Also not below 1.8 mm thick duly

sealed at joinst and 6 A. Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Acrylic box, single mounting base

frame covered with textured / metallic / white front plate modules erected / flushed

on wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector(make & model approved by EIC and matching colur with switches

accessories) as directed for open wiring. Light point. Cat.-II.

Length of point wiring must not increase than 10 mtr. For that necessary switch

boards and their locations must be finalised before execution by agency otherwise

payment will not be done for extra long point. (For future extention, if required,

agency has to erect one higher size metal box and modular plate as per instruction

of EIC. Cost of blank plate shall be paid as per tender item) [conductor resistance

should be as per IS:8130/1984]

For Bell Point, Cat.-II 4.00 Point 382.00 Rupees Three Hundred Eighty

59B Two Only

For Fan Point (with 6 A. Modular type switch and two module hum free EME Five 8.00 Point 568.00 Rupees Five Hundred Sixty

59C Eight Only

step type Electronic fan regulator both having ISI mark) Cat.-II

For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) 12.00 Point 410.00 Rupees Four Hundred Ten

For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI 25.00 Point 234.00 Rupees Two Hundred Thirty

59E Four Only

mark ) Cat.-II.

60 Providing and erecting Medium Class FIA approved and ISI mark white colour 60.00 Mtr. 24.00 Rupees Twenty Four Only

(embossed) RIGID PVC PIPES of following size complete erected with necessary

PVC fittings & Junction boxes fixed with adhesive solution & clamps on / in wall /

ceiling along with continuous fish wire to draw mains with necessary fittings and

junction boxes for following dia. 20 mm. dia.

61A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade 100.00 Mtr. 56.00 Rupees Fifty Six Only

in 25/32 white approved make press fit casing capping with double locking

arrangement with grooves, trunking of size not below 10/12 mm in height IS :

ISI Part –II and with approved make white accessories like inside and outside

coupler, elbow, tee, junction boxes etc. Also not below 1.8 mm thick duly sealed at

joinst with FRLS PVC insulated wire for earth continuity. (Approved ISI make only)

[a] 2 x 1.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm.

FRLS copper multi stranded conductor for earthing as per standard colour code.

(Conductor resistance should be as per IS:8130/1984)

61B 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. 100.00 Mtr. 135.00 Rupees One Hundred Thirty

FRLS copper multi stranded conductor for earthing as per standard colour code. Five Only

(Conductor resistance should be as per IS:8130/1984)

62 Providing and fixing Plug Point wiring with approved ISI make 2 x 2.5 sq.mm 12.00 Each 588.00 Rupees Five Hundred Eighty

copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper PVC insulated Eight Only

FRLS wire for earth continuity in 25/32 white approved make press fit casing capping

with double locking arrangement with grooves, trunking of size not below 10/12 mm

in height IS:14927 ISI Part –II and with approved make white accessories like inside

and outside coupler, elbow, tee, junction boxes etc. Also not below 1.8 mm thick duly

sealed at joinst with FRLS PVC insulated wire for earth continuit with 16 Amp. ISI

marked flush type modular switch / Socket and accessories erected on PVC / Acrylic

box, single mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. For open wiring (a)

Amp. Indicator switch & 1 No. 6/16 A universal socket white colour suitable for

3 pin top duly both having ISI mark. (Conductor resistance should be as per

63 Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 2.00 Each 7025.00 Rupees Seven Thousand

225 mm dia in soft soil. Suitable for doing pipe-in-pipe technology earthing.Earthing Twenty Five Only

electric rod must be made from Corrosion free Hot dip galvanizing pipes having

following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of

Reputed Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed

Brand Terminal Size: 70mm X 100mm length, Terminal Should be made from inner

pipe for that pipe must be pressed and gave rectangular shape so its work as a

terminal.The hot deep galvanising must be done after above process.Galvanised

thickness must be minimum 75 micron any where. SS Nut bolt:- 2 no.with washer

suitable for 14mm dia. hole must be provided at terminal. total minimum

Weight(approx.) of earth electrodewith inside conductive material minimum should

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture

for long time Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X

400 mm depth and Cover should be heavy duty cast iron with required size of

mm X 300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM

has to submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be

measured with earth tester. Agency has to bring the earth resistance to at least

ohms & voltage between neutral & Earthing upto 02 volt. Agency has to maintain

earthing & its value for one year. Earthing must be done in the presence of A.E.

64 For above earthing additional charges for boring in hard rock soil (by breaker) & 2.00 Each 276.00 Rupees Two Hundred Seventy

filling soft soil in earth pit (certificate for soil have to given by DEE / AE along with Six Only

photographs)

65 Supplying & erecting LED indoor fitting of approximately 4 feet long with LED of 8.00 Each 370.00 Rupees Three Hundred

wattage 0.2W to 0.5W assemble on single MCPCB with housing use as a heat Seventy Only

sink shall be made from Aluminum exttusion having enough strength (Sample must

be approved by EIC) With Polycarbonate diffuser With Following Specification

(1) Company Mark/Name on the Fitting

(2) Rated input voltage and frequency 220V to 2240 VAC,50Hz

(3) Rated input wattage max 24 W

(4) Rated input current ; 0.2 Amp.

(5) Power Factor : Min.0.90

(6) ATHD : Max. 15%

(7) Rated Luminous flux : Min. 2420 lm

(9) CRI : Min/ 80 Ra

(10) Driver Effciency : min. 80%

(11) LED life span : Min. 50000 Hrs @ L70

(12) Over Voltage Protection : Withstand up to 440 V/AC for 4 Hrs.

(13) Surge Protection : Min.2 KV

(14) IP rating : IP

(15) IK rating : IK

(16) Short circuit, Open Circuit & Reverse Polarity must be provided

(17) Fixing clamp design & strength should be sufficient to hold the fitting

erected on wall or ceiling.

(18) 3 core copper wire of appropriate size with earthing connector (Note:-The

manufacturer/ authorized Channel partner of the manufacturer has to submit

5 yrs free replacement Guarantee for complete Fixture) Approval will be given

strictly subject to item specification.

66 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 33.00 Each 111.00 Rupees One Hundred Eleven

240 voltage, minimum 15000 burning hours life, 500 V in built-surge Only

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable Lamp

67 Providing and erecting Polycarbonet body surface mounting LED Bulk 2.00 Each 780.00 Rupees Seven Hundred Eighty

head type 9 watt Lighting Fitting with electronic driver having THD < 15%, Only

CRI>80, P.F.0.95 And lumen output from luminaire 720 lm, input voltage

range 90-300 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt driver having

efficiency >=80lm/w, -20 deg C to + 60 deg C working temperature, AL frame

with Beam Angle 120 deg.

68 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 8.00 Each 1929.00 Rupees One Thousand Nine

Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 Hundred Twenty Nine Only

mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power

Consumption: maximum 53W, (5) RPM: minimum 330, (6) Service value:min

m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty premium quality Ball

bearing: Two, (9) Total Body: Top & Bottom should be alluminium, (10) Blade:

Aluminium approx 1.1 mm thick, (11) Colour: White high grade powder coating, (12)

Canopy: Two Nos. Heavy duty, (13) Condenser: min 1.5 MFD (15% Tolerance )as

per is 1709-1984, Aluminium body premium quality, Branded make,(14) Down road:

up to 1.0 mtr as per site requirment, (15) Required fixing accessories, (16) 3 core

0.75 sq.mm ISI wire as per site requirment, (17) No vibration and noise due to

mechanical parts. (Agency has to erect safey wire with ceiling fan and checked with

EIC) (OEM has to approved model as per tender specification and tested at ERDA)

(Necessary test reports should be submitted strictly at the time of approval. Sample

approved by EIC subject to above specification only)

69 Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with 8.00 Each 43.00 Rupees Fourty Three Only

Making the site as original.

70 Supplying & Erecting Decorative Ding Dong bell Stereo type 250 Volt complete 4.00 Each 170.00 Rupees One Hundred Seventy

erected on existing polished wooden block or in M.S. box with 3mm thick white ISI Only

mark laminated sheet. [Anchor (Chime model), vision, rider Make]

71 Providing & erecting 240 V MCB Double pole switch for Motor & Inductive load 5.00 Each 327.00 Rupees Three Hundred Twenty

(C curve) having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. Seven Only

box having following capacity. For 40 Amp.

72 Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG 5.00 Each 272.00 Rupees Two Hundred Seventy

sheet steel duly powder coated with gasket, dust & vermin proof bakelite shield two Two Only

earthing terminals for following type of RCCB, RCCB + MCB [a] For 2 pole [Same

company metal box used as MCB / ELCB used with earthing terminal with

necessary Numbering / marking with oil Paint by painter]

73 Providing ad erecting approved make single phase Double Door metal clad D.B. as per 4.00 Each 4906.00 Rupees Four Thousand Nine

relevant indian standards ammended upto date. Hundred Six Only

Supplying and fixing following way single phase MCB distrubution board of company

fabricated sheet box with powder coated inside and outside after apply seven tank chemical

process of CRCA sheet cover complete with suitable integral single piece construction

tinned copper busbar and link with all necessary interconnection and with necessary size

MS frame for mounting MCBDB. MCBDB Door, Back side and Body of MCBDB must be made

of 1.2 mm thick CRCA Sheet. Manufacturer must be provided (1) IP 43 and as per IS:8623-1

& 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Powder coating Certificate (3)

Tinned Copper/Brass make neutral & Earthing link with isolation & Protecting Cover for

Volts on surface / recess complete with loose wire box, terminal connectors for all incoming

and outgoing circuits, with suitable size FRLS PVC insulated copper conductor up to terminal

blocks and internal connection, tinned coppper bus bar, 1 no. tinned copper neutral link,

tinned copper earth bar, din bar, detachable gland plate, interconnections, powder painted

including earthing etc.

Single phase incoming and horizontal single phase outgoing. For 12 Way

MCBDB: Including 1 no. 40 Amp. 30 mA double pole ELCB (ELCB confirming

to IS:12640/1988 having sensitivity of 30 mA and breaking capacity of 10 KA),

1 no. MCB 40 Amp. double pole switch (C curve confirms to IS:8828 having

breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL

suitable to operate on 240 Volt A.C. power. (6 Amp:- 3 Nos., 16 Amp:- 3 Nos. &

25 Amp: 2 Nos.)

(The DBs should be used of same company of MCB / ELCB to be used)

(MCBDB must be erected in line & level with spirit level and finish the external

edge with box cutting plaster) (Same colour MCB(SP/DP) should be used as

same as MCBDB) [Including Necessary numbering / marking on box done with

red colour radium sticker as per site requirement and instructions given by

EIC on site. Font / number size given by EIC on site as per requirement]

74 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 2.00 Sq. Mtr. 2289.00 Rupees Two Thousand Two

existing min. 25 x 25 x 3 mm red oxide painted angle iron frame suitable for fixing Hundred Eighty Nine Only

ICDP SWITCH and energy meter (contractor shall make approved drawing of

Bakelite sheet To arrange required No. of Energy meter & ICDP switch -busbar etc.

as per Actual space available in electrical room at site)

75 Providing, erecting, Fabricating the M.S. structure as per requirement of site as 50.00 Kg. 77.00 Rupees Seventy Seven Only

per structure design Including proper size approved by EIC of M.S. angles, flats,

bars, square pipe, channels, sections (Tata, Jindal, Asian, JSI Make) complete with

cutting, welding, grinding and finishing duly painted with Asian/Nerolac make

premium quality oil paint and true care red oxide metal primer,asian paint make with

erection on site as per direction of engineer in charge with necessary grouting

cementing, plastering and finishing complete. All hole opening of square pipe end

must be closed with M.S plate welding. Payment will be done on KG as per Actual

76 Providing and erecting metalic danger notice board for MEDIUM VOLTAGE 2.00 Each 69.00 Rupees Sixty Nine Only

installation to be erected as per I.S.

77A Providing and erecting following type of Modular Type Accessories mounted with 20.00 Each 16.00 Rupees Sixteen Only

20 G company fabricated metalic box, single mounting base frame covered with

textured / metallic front plate, modules erected with necessary connection. As

desired by Engineer in charge.Blank Plate Single. Cat.-II.

77B (9) 16 Amp. SP one way switch Cat.-II. 1.00 Each 130.00 Rupees One Hundred Thirty

78 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable 20.00 Each 8.00 Rupees Eight Only

for cable of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved manner. [a]

79 Providing and Laying of Mains with ISI marked, 1.1 KV grade electrolyte multi 30.00 Mtr. 141.00 Rupees One Hundred Fourty

stranded, annealed copper conductor with heat resistant PVC insulated conforms to One Only

IS:694, IEC - 227 erected in existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control wiring) with required size

of copper lugs, nuts and bolts if required. One wire 16.00 sq. mm

80 Supplying and fixing radium sticker or Painting the number and words for 30.00 Each 2.00 Rupees Two Only

inventory Identification on erected fittings / equipment’s or Such accessories

(MCBDB, Panel, Pole, Rack, Earthing, Pump, Door etc.) as may required with good

quality of enamelled paint or fade proof, weather proof, waterproof high quality vinyl

radium sticker for indoor / outdoor application as directed by engineer in charge. For

one character 50 mm height.(The colour of sticker / paint should be as per

instruction given by EIC as per site requirement)

81 Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm 2.00 Each 487.00 Rupees Four Hundred Eighty

outside diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and Seven Only

required size and length suitable for 76.5 / 80 mm. required size of pole top or pipe in

pipe surface for terrace as per instruction of EIC or wall bracket as per instruction of

EIC having nuts and bolts for fixing the brackets and having spread of Upto 0.50 mtr.

length with suitable rise as per site condition and suitable welded stiffner reducer and

nipple with check nut complete painted with one coat of yellow zinc and two coats of

alluminium paint for Single arm bracket suitable for pole or terrace as per design

given by EIC (a) For single arm bracket. (Jindal / Asian / Tata / Surya Prakash

make Only) (Fabricators:- Bajaj, Valmont, Transrail, Ambica Only) (Test certificate to

be submitted)

82 Providing and Fixing SITC of Outdoor aesthetically designed LED Street 2.00 Each 3512.00 Rupees Three Thousand Five

Light Luminaire with total consumption of Max. 45 W with single piece die Hundred Twelve Only

cast aluminium housing, high power LED shall be mounted on high quality

metal core PCB with extremely precison designed heat sink complete with

IP66 protection Class with polycarbonate / thoughened glass cover the fixture

should be suitable for pole/bracket mounting. The fixture to comply both

LM79 and LM 80 guidelines with LED module min. 130 lumen/watt with

toughen Glass L70 at 50,000 hrs, provided with high quality polycarbonate

lenses for better light distribution. The watt capacity of each LED must be ≥

watt in streetlight fitting The Fixture Should be able to be Pole Mounted and

also bracket mounted, provided with high quality driver for protection against

high and low Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F > 0.95.

Also the Fixture should meet the following technical criterias Oprating range

Voltage 160 to 270 V, system efficiency >= 110 lm/w, and total lumens not

less then 4950, CCT > 5000K, CRI > 65, beam angle 120 deg, surge

immunity level at least 4 KV integral and 10 KV non integralThe Separate

Potted driver should have over current, over voltage protection, short circuit

protection so that the fixture recovers once the fault is removed. In addition to

the above product should be operational in the temperature range of 0 deg to

50 deg and humidity range of 10% to 90% RH. (Note:- The manufacturer /

authorized Channel partner of the manufacturer has to submit 5 yrs free

replcement Guarantee for complete Fixture)

83 Providing & erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI 60.00 Mtr. 46.00 Rupees Fourty Six Only

marked copper wires of following size to be erected as directed. 3 core x

sq.mm. PVC insulated round copper wire ISI mark.

84 Supplying & erecting Sintex or approved make SMC press moulded composite 2.00 Each 510.00 Rupees Five Hundred Ten Only

FRP. loop-in, loop-out approx. 2mm thick box complete with bakelite connector strip

4way & hinged doors having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable clamps& earth bolt of

following size of box.(b) 250 mm x 200 mm x 100 mm [deep]

85 Dismantling the existing light, fan, bell, independent plug point, wiring with mains of 107.00 Point 1.00 Rupees One Only

all types along with accessories etc. complete and handed over to dept.

86 Dismantling the existing switchgears, DB and Busbar of any size complete with / 5.00 Each 8.00 Rupees Eight Only

without board or angle iron frame.

Total Electrical(B) =

Total Amount (A+B) =

Total Amount (A+B) =

Ex.Engg,(Ele.)(SP) I/c Ex. Engineer

Signature of the contractor. G.S.P.H.C.Ltd, G.S.P.H.C.Ltd. Rajkot