Welcome maintenance of Offrs Md Accn at Ghunghora under AGE B/R-I of GE Dehradun

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, using old size bricks, complete all as specified and ditected.

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth complete all as specified and as directed.

Material and labour for rendering 10mm thick in cement mortar 1:3 on fair faces of concrete work even and smooth as in ceiling complete all as specified and ditected.

Taking down chowkat with shutter of any description (without taking of shutter from frame) n. exc 1.5 Sqm each complete all as specified and as directed .

Taking down chowkat with shutter of any description (without taking of shutter from frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and as directed .

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed.

Taking down shutters of any description n. exc 1 sqm each complete all as specified and directed.

Supply and fixing of flush shutters 35 mm thick one face is covered with decorative face veneer teak wood finished with lipping/frame to match , solid core construction, with block board core and plywood face panels, commercial type on other sides, complete all as specified and as directed.

Supply and fixing of 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

Supply and fixing of factory made pre-laminated WPC flush type shutter of 18mm (+ 0.5) thickness consisting of panel of 18mm (+0.7mm) thick celuka ply, of denistity 600 Kg per cum manufactured by ISO-9000 certified company, using for shutter celuka ply 18mm thick and fixed with frame, all four edges of shutters, using 13/6 size self tapping steel screws. The thickness of shutter is edges painted by matching colour of PVC lining of prelam coloured PVC sheet using etc, complete as per manufactue specification.

Supply and fixing of 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed.

Supply and fixing of factory made 100 % solid wood plastic composite (WPC) door frame 75x50 x50mmsize, made from 100 % lead free wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing as directed.

Supply and fixing of framed work such as grills,gratings,etc., with ends of bars shouldered or riveted, or forged into spikes; framed guard bars;barred iron doors and similar work conforming to Fe 210,Gde E-165 complete all as specified and as directed.

Supply and fixing in repair of stainless steel 304 grade wire 0.36 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed.

Supply and fixing of 200 mm long, solid in one piece stainless steel barrel tower bolts 204 grade,complete all as specified and directed.

Supply and fixing of 150 mm long, solid in one piece stainless steel handle 204 grade ,complete all as specified and directed.

Supply and fixing of 100 mm size stainless steel butt hinges 204 grade and fixed with stainless steel screws, complete all as specified and directed .

Supply and fixing of ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs , complete all as specified and directed. Make :Hexa/ Hettich/ Hafele

Supply and fixing of stainless steel sliding door bolts 204 grade, hasp and staple type with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and ditected.

Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads all as specified and directed

Material and labour for sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

Material and labour for 4mm thick figured glass, pin headed and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane complete all as specified and directed.

Supply and fixing of continuous (Piano) hinges, mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and ditected.

Supply and fixing of stainless steel auto closing 35 mm of o crank(KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified. Make :Hexa/ Hettich/ Hafele

Supply and fixing of in repairs stainless steel peg set of five with cromium plated back plate 304 grade,40mm wide fixed with chromium plated screw, complete all as specified and directed.

Supply and fixing of magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

Supply and fixing in repair of chrome plated stainless steel wire basket (storage basket) pull out type for large utensils of size 480 x 500 x 150 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly

Supply and fixing in repair of chrome plated stainless steel wire basket (plate basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly

Supply and fixing in repair of chrome plated stainless steel wire basket (cup and saucer basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly

Supply and fixing in repair of chrome plated stainless steel wire basket (cutlery basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly

Supply and fixing in repair of chrome plated stainless steel wire basket (grain trolly basket) pull out type for large utensils of size 480 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly

Supply and fixing in repair of aluminium body door cill at bottom part of door to stop entry of insect inside the room not less than 90 cm,complete all as specified and as directed.

Supply and fixing in repair of 20 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends as per approved sample, complete all as speccified and directed

Material and labour for 25 mm thick cement concrete in 1:2:4 type B-1 ( 20 mm graded aggregate as in levelling course etc complete all as specified and directed

Material and labour for vitrified ceramic tiles light shade 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry @ 3 Kg/Sqm and pointed in white or coloured cement to match with tile including dismantling of existing tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for vitrified ceramic tiles light shade 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/ dado etc. over and including rendering/screed bed 10 mm thick in CM 1:4 set and jointed in neat cement slurry @ 3 Kg/Sqm and pointed in white or coloured cement to match with tile including dismantling of existing tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry @ 3 Kg/Sqm and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 including dismantling of existing tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for coloured glazed ceramic tiles in vertical surfaces of size 350mm x 250mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry @ 3 Kg/Sqm and pointed in white or coloured cement to match the tile including dismantling of existing tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for heavy duty anti skid parking coloured tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry @ 3 Kg/Sqm and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with spacers 3mm set, jointed and pointed in neat cement slurry @ 3 Kg/Sqm as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed.

Material and labour for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed.

Material and labour for 100mm thick cement concrete 1:4:8 type D2 40mm graded stone aggregate as in subbase etc complete all as specified and directed

Material and labour for one coat of oil bound distemper of any tint on already prepared old surfaces of wall etc complete all as specified in SSR Part I and directed

Material and labour for one coat of oil bound distemper of any tint on already prepared old surfaces of ceiling etc complete all as specified in SSR Part I and directed.

Material and labour for one coat of cement base paint of any tint on already prepared old surfaces of wall etc complete all as specified in SSR Part I and directed.

Material and labour for complete removal of existing surface and preparation of wall and applying exterior grade acrylic water proof wall care putty not less than 1mm thick to make the surface smooth complete all as specified and directed.

Material and labour for two coats of damp proof paint of any tint over a coat of suitable primer including preparation of plastered surfaces of any description , complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint on new steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete all as specified.

Material and labour for preparation of new or previously untreated surfaces of wood over 10 cm width/girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified in SSR Part I and directed .

Material and labour for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified.

Material and labour for two coats of distemper oil emulsion over a coat of suitable primer including preparation of new surfaces of wall etc, complete all as specified and directed.

Material and labour for two coats of distemper oil emulsion over a coat of suitable primer including preparation of new surfaces of ceiling etc, complete all as specified and directed.

Material and labour for two coats of cement base paint over a coat of suitable primer including preparation of new surfaces of wall etc, complete all as specified and directed.

Material and labour for rendering 15 mm thick mixwd with and including WPC on parapet, chajja, facia,celing etc in CM 1:3 and finished surfaces even and smooth (with out using extra cement) on external surfaces including two coat of whether proof exterior emulsion paint , over a coat of primer including taking down of old plaster of any description complete all as specified and directed.

Supply and fixing in repair of CP brass soap dish 6 inches size, complete all as specified and directed.

Supply and fixing in repair of glass corner shelf suitable size made of 5 mm thick toughened glass with CP railing etc complete all as specified and directed

Supply and fixing in repair of glass shelf assembly consisting of 5.5 mm thick toughened glass with CP railing and brass brackets of size 500x125 mm, complete all as specified and directed.

Supply and fixing in repair of 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed.

Supply and fixing in repair of brass chromium plated towel ring complete all as specified.

Material and labour for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10 but not exc 20cm girth complete all as specified.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing and removing from site ,complete all as specified and directed.

Supply and fixing of medium grade galvanised steel tubing ISI marked with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing, complete all as specified and directed.

Supply and fixing of rotational moulded polyethylene 500 Ltrs Capacity, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including dismantling & taking down existing old u/s tank and removing from site,complete all as specified and ditected.

Supply and fixing of rotational moulded polyethylene 1000 Ltrs Capacity, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including dismantling & taking down existing old u/s tank and removing from site,complete all as specified and ditected.

Supply and fixing in repair of 20 mm size PTMT ball valves, high pressure with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of any bore & in any position,complete all as specified and as directed.

Supply and fixing in repair of sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fixing in repair of CP Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legs & Flanges complete all as specified and directed.

Supply and fixing in repair of 15mm dia CP brass chromium plated central hole basin/sink mixer with accessories for fixing hot and cold water, dcrewed down for 15mm bore GI pipe, complete all as specified and directed.

Supply and fixing in repair of 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fixing in repair of 15 mm bore Angle cock/stop valves cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

Supply and fixing in repair of brass chromium plated ovehead shower with shower arm complete all as specified and directed.

Supply and fixing in repair of CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed.

Supply and fixing in repair of vitreous chinaware wash down water closet pan (Padestal pattern) fency type including fixing bolt, flushing cistern, Dual flush single piece EWC with soft close seat cover fittings 'P' or 'S' trap complete all as specified and dircted.

Supply and fixing in repair ofs vitreous china wash down water closet Padestal pattern white (excluding flushing cistern and fluch pipe) with CI 'P' or 'S; trap including plastic white seat cover, CP Jet spray with 1.0 mtr long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floor complete all specified and directed.

Supply and fixing in repair of vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including 100mm dia CI 'P' trap of 60cm long, including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed

Supply and fixing in repair of 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified.

Supply and fixing in repair of vitreous china wash hand basin, white flat back, size 550x400 mm excluding taps but including waste pipe, CP waste fittings 32mm size long shank and MS brackets all as specified and directed by Engr-in-charge Make: Cera, hindware, parryware

Supply and fixing in repair of PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed..

Supply and fixing in repair of 32mm dia C P brass waste fitting for WHB and sink etc with long screwed shanks and fly nut,complete all as specified and directed.

Supply and fixing in repair of 32mm dia PVC waste pipe for WHB and sink not less than 80cm long with coupler/ union,complete all as specified and directed.

Supply and fixing in repair of plastic water closet seat cover, white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed

Supply and fixing of 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified.

Supply and fixing of 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified.

Supply and fixing in repair of heavy duty thread type PVC water tank cover with frame fixed on PVC tank with 4 Nos of screws for 500/1000 ltrs tank complete all as specified and directed .

Sucking out sewage water through sewage tanker from the man hole/septic tank/soakage well in different location and disposal (5000 ltr capacity) of out of MD land as directed by Engr-in-Charge. Note :- For cleaning and attending the complaint comprising the following to clear the blockage of WC, grating and gully trap. (a) Minimum 01 person will be present on all working days 0900hrs to 1700hrs for maintenance and report to AGE B/R-I Sub Div. (b) If contractor representativ (Safaiwala) is not to report daily to B/R complaint cell, Double amount of market rate i.e. Rs 450/- will deducted from the contractor payment for the absent period.

Dismantling asbestos cement (corugated or semicorrugated etc) sheets, in roof covering/shed including ridge.etc, complete all as specified and directed

Supply and fixing of pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls/chajja covering,ridge etc fixed with self tapping screws as specified

Supply and fixing of acrylic PVC sheeting 2-3 mm thick fixed with screw and washer in gate/ fencing,roof, wall etc complete all as specified and as directed .

Dismantling of unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Supply and fixing of MS rolled sections / tubular pipes etc as in main or cross beams, hip and jack rafters, purlin where connected to comman rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to grade Fe290-W(Gde-E-165), complete all as specified and directed.

Material and labour for cleaning of water storage tank capacity exceeding 250 litres but not exceeding 500 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner complete all as specified and directed. NOTE: - (i) The whole process of disconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due. (ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it.

Material and labour for taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and rubbish off the premises, cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00 kg/sqm and grouting 25mm thick cement concrete type cement type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (b) M&L for two coats of acrylic cementitious water proofing coating (Dr. FIXIT pidifin 2K manufactured by M/S Piditite Industries Ltd or equivalant) and followed by a overlay protective screed 15mm thick CM(1:3) alongwith liquid water proofing compound approved make on top surfaces of sunken slab after preparation as mentioned above method of application for acrylic cementitious water proofing coating is followed as per manufacturers instructions complete all as specified and directed.

Supply and fixing of powder coated aluminium standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with glass 5mm thick, fixed with glazing clips, aluminium grill with mesh size 75 mm and aluminium bar 6 mm XPM type, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc, including dismantling existing window any type complete all as specified and directed:- Shutter Top & bottom size:- 37.50 x 15.00 x 1.60 mm Shutter inner lock size:- 37.50 x 15.00 x 1.60 mm Shutter side (Handle) size:- 37.50 x 15.00 x 1.36 mm Chowkhat bottom size:- 50.30 x 26.00 x 1.20 mm Chowkhat top & sides size:- 50.30 x 26.00 x 1.00 mm Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan/ Kitply/ Green ply (iii) Glass: Saint gobain / Modi guard / Tata

One light point, controlled by one way switch, complete all as specified and directed.

One fan point, controlled by one way switch through regulator, complete all as specified and directed.

One bell point, controlled by bell push switch, complete all as specified and directed.

One three pin 5 Amp socket on same board with other switches, complete all as specified and directed.

One three pin 5 Amp socket on independent board, complete all as specified and directed.

Two way light point controlled by two two way switch, complete all as specified and directed.

Description all as per Item No 102 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed.

Material and labour for point wiring using approved colour coding as per IS, with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through existing concealed conduit of any size or type complete including factory made MS pressed modular metal flush boxes with zinc coated duly concealed in wall of thickness 1.2 mm for mounting of modular switches, sockets, fan regulators etc including logic modular white frame with cover plates of suitable size/module as required at site and 1.5 sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sunken boxes including taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: Note : The wiring to be done as per IE rule and as per colour code.

One light point, controlled by one way switch,complete all as specified and directed.

One fan point, controlled by one way switch through regulator, complete all as specified and directed.

One bell point, controlled by bell push switch, complete all as specified and directed.

One three pin 5 Amp socket on same board with other switches, complete all as specified and directed.

One three pin 5 Amp socket on independent board, complete all as specified and directed.

Two way light point controlled by two two way switch, complete all as specified and directed.

Description all as per Item No 103 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed.

One light point, controlled by one way switch, complete all as specified and directed.

One fan point, controlled by one way switch through regulaor, complete all as specified and directed.

One bell point, controlled by bell push switch, complete all as specified and directed.

One three pin 5 Amp socket on same board with other switches, complete all as specified and directed.

One three pin 5 Amp socket on independent board, complete all as specified and directed.

Description all as per Item No 104 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed.

Material and labour for point wiring using approved colour coding as per IS, with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through existing concealed conduit any type or size complete including pressed iron/steel suction box of thickness 1.2 mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for sunken boxes after taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: Note : The wiring to be done as per IE rule and as per colour code.

One light point, controlled by one way switch, complete all as specified and directed.

One fan point, controlled by one way switch through regulator, complete all as specified and directed.

One bell point, controlled by bell push switch, complete all as specified and directed.

One three pin 5 Amp socket on same board with other switches, complete all as specified and directed.

One three pin 5 Amp socket on independent board, complete all as specified and directed.

Description all as per Item No 105 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed.

2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, complete all as specified and directed.

2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, complete all as specified and directed.

Material and labour for sub main wiring with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded drawn in existing concealed conduit any type or size including one single core green colour PVC insulated unsheathed cable FRLSH copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. Note : (i) The wiring to be done as per IE rule and as per colour code. (ii) 3 run of cable shall be measured as 1 unit.

2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, complete all as specified and directed.

2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, complete all as specified and directed.

Supply and fixing of modular switch single pole one way, one module, 230 Volts 6 Amp complete all as specified and directed.

Supply and fixing of modular socket 6 Amps, 2/3 pin combined, two module, 230 Volts complete all as specified and directed.

Supply and fixing of modular switch single pole one way, one module, 230 Volts 16 Amp complete all as specified and directed.

Supply and fixing of modular socket 6/16 Amps, 2/3 pin combined, two module, 230 Volts complete all as specified and directed.

Supply and fixing of modular switch single pole two way, one module, 230 Volts 6 Amp complete all as specified and directed.

Supply and fixing of bell push modular flush type, single pole one way 6 Amps, one module, 230 volts complete all as specified and directed.

Supply and fixing of calling bell ding dong type AC 230 Volt single pole complete all as specified and directed.

Supply and fixing of lamp holder polycarbonate insulated body, with back plate suitable for batten fitting complete all as specified and directed.

Supply and fixing of step type modular fan regulator two module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.

Supply and fixing of modular ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

Supply and fixing of switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.

Supply and fixing of socket outlet 3 pin, 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed.

Supply and fixing of switch piano flush type, single pole, one way, 230 Volts 15/16 Amps complete all as specified and directed.

Supply and fixing of socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and directed.

Supply and fixing of bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.

Supply and fixing of ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

Supply and fixing of energy efficient LED tube light fittings 20 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing of energy efficient LED tube light fittings 10 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing of LED Bulk head light fitting 10 Watt capacity die cast alluminum including surface mounted, with decorative oval diffuser comprrising of high brightness LEDs complete all as specified and directed.

Supply and fixing of LED building security light fitting 35 Watt 230 Volts, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, nuts & washers of min 1.2 mtr including grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified including taking out old u/s fitting complete all as specified and directed.

Supply and fixing of distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection and also incoming and outgoing connections with suitable size of lugs/thimbles/glands including taking down existing MCB DB etc complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make.

Supply and fixing of distribution board SPN 12 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection and also incoming and outgoing connections with suitable size of lugs/thimbles/glands including taking down existing MCB DB etc complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make.

Supply and fixing of distribution board Triple pole and neutral double door 415 Volt 4 way DBs IP-43 suitable for 160 Amps rated bus bar and also incoming and outgoing connections with suitable size of lugs/thimbles/glands including taking down existing MCCB DB etc complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make.

Supply and fixing of distribution board vertical Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 160 Ams rated bus bar & including one MCCB 100 Amp 4 pole as incoming iand also incoming and outgoing connections with suitable size of lugs/thimbles/glands including taking down existing MCCB DB etc complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make.

Supply and fixing of MCB single pole and neutral 240 volt 10 KA 40 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply and fixing of MCB single pole and neutral 240 volt 10 KA 32 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply and fixing of MCB single pole 240 volt 10 KA 6- 32 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply and fixing of MCB TPN 415 volt 10 KA 63 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply and fixing BLDC ceiling fan complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz complete all as specified and directed. Note : Old fan shall be deposited to AGE E/M-II store yard and necessary RV enclosed with RAR and final bill.

Supply and fixing of exhaust fan, steel body AC single Phase, 230V of size 300m sweep with, blades, and frame and louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep complete and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. Note : Old fan shall be deposited to AGE E/M-II store yard and necessary RV enclosed with RAR and final bill.

Description all as per item No 36 above but fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specified and directed. Note : Old fan shall be deposited to AGE E/M-II store yard and necessary RV enclosed with RAR and final bill.

Supply and fixing of electric water heater, storage type ABS body with EPAC coated steel inner tank having minimum 8 kg/cm2 pressure bearing capacity and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. Note : Old geyser shall be deposited to AGE E/M-II store yard and necessary RV enclosed with RAR and final bill.

Material and labour in replacement for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00mm dia by means of bolts, nuts, Check nuts and washers of galvanised iron and thimbles and other end of the earth wire all as shown in electrical plate No 3 of MES Schedule Part-I (2009) connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board and protected by galvanized iron pipe medium 15 mm bore, and water pipe 20 mm bore GI light grade with funnel and wire mesh, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) 75mm thick cover, reinforced with 8mm dia deformed or TMT bars 100mm C/C both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. NOTE: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted. (iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost.

Material and labour for laying, jointing and testing in replacement underground XLPE insulated & PVC sheathed, armoured heavy duty multistranded electric cable with aluminium conductor, 1100 volts grade in trenches/ ducts/ along poles/ through pipe/ under road/ PCC etc and connecting with new aluminium lugs including taking out existing unserviceable of any size/ type complete for the following cables of cross sectional area all as directed: Notes: (a) Excavation, returning, removal, sand cushioning, cable protection covers, GI protection pipe etc shall be measured and paid separately. (b) Any damage done during cable excavation to the existing UG infra like UG pipelines, UG electric cables, OFC etc shall be repaired by the contractor at their own expenses. (c) Cost of T&P required for handling/ laying of cable is deemed to be included in the rate quoted by the contractor.

10.0 Sqmm, 4 core, complete all as specified and directed.

16.0 Sqmm, 4 core, complete all as specified and directed.

25.0 Sqmm, 4 core, complete all as specified and directed.

Excavation in trenches in any type of soil not exc. 1.5 mtr wide and not exc. 1.5 mtr in depth for laying of cable, foundation etc and getting out complete all as specified and directed.

Material and labour for sand cushioning & covering of UG cable using crushed metal sand in trenches for cable protection complete all as specified and directed.

Material & labour for sub class B bricks well burnt of size 23 x 11.5 x 7.5 cm for protection of UG cable laid dry flat over the cable width wise across the length of the cable and abutting each other with gap less than 10mm between the adjacent bricks in trenches complete all as specified and directed.

Returning, filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and directed.

Removing of excavated soil to a distance n exc 50 mtr and deposited where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Supply and laying GI tubing light grade with all fittings and accessories for protection of cables on ploe/ wall or under road crossings including clamps, nuts, bolts etc of size 50 mm complete all as specified and directed.

NOTE:- Amount of credit of Rs. 95607.00 for retrieved materials is mentioned in Schedule of Credit Page No 37 & 38 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Please Enable Macros to View BoQ information