Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.9 LAccepted-AOC HABITATION VILLAGE COUNCIL SEPAHIJALA TRIPURA | ₹6.9 L | L1 | Accepted-AOC Being a 1st lowest |
| 2 | L2₹10.8 L+₹3.9 L (56.3%)Rejected-AOC AMARPUR NAGAR PANCHAYAT AMARPUR GOMATI DISTRICT TRIPURA | ₹10.8 L+₹3.9 L (56.3%) | L2 | Rejected-AOC Being a 2nd lowest |
Tender Value
₹9.7 L
EMD Value
₹19,405
Closing Date
28 May 2026, 3:00 pmClosed
Executive Engineer
O/o the Executive Engineer DWS Division Udaipur
R/Mtc. SBDTW undr JJM/RWS/NRDWP Schm/SH- Reparng, cmplt rewindng burnt submrsbl PM in/c lowrng lftng, Suplyng, fixng Small bore starter, extnsn, mtc. wrk pipline existng SBDTW wthin TPN RD blck DWS SD II durng yr 2026-27.
2026_CEDWS_73167_1
22/EE/DWS/DIVN/UDP/2026-27
Open Tender
Civil Works - Water Works
Percentage
240 days
Tepania
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,000
₹19,405
16 Jul 2026
21 May 2026
28 May 2026
22 May 2026
28 May 2026
22 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Repairing and maintenance of submersible motor suitable for submersible pump set by complete dismantling in/c providing & fitting fixing of PVC (IS: 8783-1978) Insulated electro grade copper (IS:613-1984) conductor winding in startor & all necessary spare parts and reassembling the same in/c servicing of motor & necessary trial run as per specification and direction of the Engineer-in-charge. i) 2.0 HP motor suitable for 2000 GPH capacity submerssible pumpset. | 20 | Nos | 6,794.9 | ₹1,35,898 |
| 1.01 | ii) 3.0 HP motor suitable for 2000/2500 GPH capacity submerssible pumpset. | 5 | No | 7,445.2 | ₹37,226 |
| 2 | Repairing of 2 HP/3 HP capacity submerssible pump of different make in/c dismantling the old unserviceable pump and reassembling the pump in good condition by providing necessary trial run as per specification and direction of the Engg-in-charge. | 15 | No. | 3,500 | ₹52,500 |
| 3 | Charges for lifting of 2 HP/3 HP Submersible pump- motor, column pipe assembly from existing bore well in/c stacking the column pipe assembly in suitable place and lowering the same after necessary repairing & maintenance of pump motor from site to workshop as per direction of Engineer -in-charge. | 40 | No. | 1,840 | ₹73,600 |
| 4 | Supplying and installation of water lubricated submersible pump having ISI mark of capacity 2000 GPH of total head 60 mtr. Couple with submersible motor 3HP suitable for 240voltage (+10% variation single phase 50Hz, AC supply DOL starting method to run 2880RPM along with 35mtr 2.5sqm PVC insulated 3(three) core flat copper cable including fitting and fixing, lowering with 40mm dia GI pipe upto 100ft (30.00mtr) etc. complete as per direction of the Engineer-in-charge( cost of 40mm GIfitting swill be paid separetely). | 5 | No. | 34,721 | ₹1,73,605 |
| 5 | Providing and fitting fixxing of single phase motor starter panel unit 3.0HP capacity comprising with 2 plate conductor, overload relay, capacitor, volt meter of BCH/L&T make with necessary copper wire etc. complete as per direction of the Engg-in-charge. | 15 | No. | 4,407.5 | ₹66,112.5 |
| 6 | Supplying &fitting fixing of KIOSK (Size:450 x1200x850) fitted with 4 Nos. support of 75x75 mm (mm thick) MS angle of embedding with 1:2:4 cement concrete base (size 300 mm x 300 mm x 600 mm) with proper locking arrangement and coated with anticorrosive paint (both inside and outside) includingcomplete in all respect as per direction of the Engineer-in-Charge. | 3 | No. | 4,900.53 | ₹14,701.59 |
| 7 | Supplying and fitting fixing of 32 Amp single phase Main Switch of BCH/L&T/Havel's make with necessary copper wire wiring etc.Complete as per direction of the Engineer-in-Charge. | 15 | No. | 1,394.93 | ₹20,923.95 |
| 8 | Providing and fixing G.I pipes of medium class as per IS: 1239 with latest ammendment complete with G.I fitting including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer-in-charge.
A. External work. i) 15mm dia nominal bore | 15 | Mtr | 254 | ₹3,810 |
| 8.01 | ii) 40mm dia nominal bore | 85 | Mtr | 549.1 | ₹46,673.5 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_74464.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.43 MB
BOQ_74464.xls
BOQ • 0.37 MB
DNIeT_22_SBDTW_rewinding_SM_PM_Lftng_Lowerng_TPN_SD_II.pdf
Tender Documents • 3.22 MB
Corrigendum_PNIeT_03.pdf
PDF • 0.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .