Supply, installation, testing and commissioning of 100 MT capacity Electronic Pitless Type Road Weighbridge including Civil and Electrical Works along with 4 years of CAMC after 1 years of guarantee/Warranty Period at Chapapur-II OCP, Mugma area, EC

ISMB (600 X 210 X 12) Size in MM - Total length about 34 MTR

ISMB (450 X 150 X 9.4) Size in MM- Total length about 34 MTR

ISMB (300 X 140 X 7.7) Size in MM- Total length about 60 MTR

12 mm MS Plate- approx 66 SQ. MTR

20 mm MS Plate- approx 1.0 SQ. MTR

M20 x 50 HT Bolt & Nut

Top Bolt with Nut Machine 19 X 300

Fabrication Cost

30 Te capacity digital load cell as per specification (Refer Annexure B 8.II.a of Scope of work)

7 segment Digital weighing indicator as per specification (Refer Annexure B 8.II.b of Scope of work)

Jumbo Display Unit (Refer Annexure B 8.II.c of Scope of work)

Junction Box for Digital load cell as per specification.(Refer Annexure B 8.II.d of Scope of work)

Computer/PC with accessories as per specification (Refer Annexure B 8.II.e of Scope of work)

Furniture & Fixtures for weighing room as per specification (Refer Annexure B 8.II.f of Scope of work)

1.5 Te Air conditioner machine with suitable voltage stabiliser (5 KVA) (Refer Annexure B 8.II.g of Scope of work)

3KVA Constant Voltage Stabiliser / CVT (Refer Annexure B 8.II.h of Scope of work)

RFID tag (Refer Annexure C 8.III.1 of Scope of work)

Long Range RFID Reader/Writer with pole and mounting (Refer Annexure C 8.III.2 of Scope of work)

Signal Light For traffic control (Refer Annexure C 8.III.3 of Scope of work)

5 Mtr Long Boom Barrier complete with Trigger Switch, operating & Safety Sensor (with IP54 protection) (Refer Annexure C 8.III.4 of Scope of work)

3 KVA UPS with 12 nos. Battery (65Ah) and 2 hrs full load backup with battary stand (Refer Annexure C 8.III.5, 6 of Scope of work)

Network Switch Managed Multi port (16/18 port) (Refer Annexure C 8.III.7 of Scope of work)

9U Rack (Refer Annexure C 8.III.8 of Scope of work)

Laser Printer (Refer Annexure C 8.III.9 of Scope of work)

Integration various models existing CCTV hardware with RFID system for snapshot (Refer Annexure C 8.III.10 of Scope of work)

Application software as per Specification (Refer Annexure C 8.III.1 of Scope of work)

Surge Protection devices (SPDs) (Refer Annexure C 8.III.11 of Scope of work)

Chemical Earthing Kit of Suitable length (Refer Annexure C 8.III.12 of Scope of work)

Lightning arrestor as per system requirement

HDPE Pipe (Refer Annexure C 8.III.14 of Scope of work)

Cat6 Cable (Refer Annexure C 8.III of Scope of work)

Cable (Refer Annexure C 8.III of Scope of work)

Battery stand (Refer Annexure C 8.III of Scope of work)

Sockets (Refer Annexure C 8.III of Scope of work)

MCB (Refer Annexure C 8.III of Scope of work)

Connectors for wire (Refer Annexure C 8.III of Scope of work)

Plug(6/WB) (Refer Annexure C 8.III of Scope of work)

Installation, commissioning & complete integration of all the items (Refer Annexure C 8.III of Scope of work)

5 MP Bullet IP Camera (Motorized vari-focal lens) (Refer Annexure D. 8.IV.1 of Scope of work)

5 MP IP Dome Camera (Refer Annexure D. 8.IV.2 of Scope of work)

LED Display 32 Inches (Refer Annexure D. 8.IV.3 of Scope of work)

NVR 4 Channel with 1 TB storage (Refer Annexure D. 8.IV.4 of Scope of work)

8 Port unmanaged switch (Refer Annexure D. 8.IV.5 of Scope of work)

Installation, testing and commissioning charges

Supply of 16 mtrs long tubular pole including lightning arrestor.

Transporting of 16 mtrs long tubular pole .

Erection of 16 mtrs long tubular pole with cement concrete foundation .

Supply and drawing of 10 sq mm Aluminium cable from lighting arrestor point to earth pit .

Supply and fabrication of difference type of MS bracket .

Supply and drawing of GI Wire for making of net wire .

Supply and fixing of chemical Earth pit with providing required materials . a ) Supply of Earthing , electro , specification for one set as b ) Length = 3000mm c ) Outer dia = 80mm d ) Inner dia = 40 mm e ) Connection terminal = 14 mm f ) Pipe = dual GI

Supply of backfill chemical earth resistance enhancing compound ( 25 kg in each bag ) 2 bag each hole .

Supply and drawing of 16 sqmm 2 core armoured aluminium cable for neutral earthing .

Labour cost fot earth digging construction of earth, connection work and installation .

Testing and commissioning of earth pit as per IS standard .

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Supplying 400 G polythene sheet

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position specified grade of RCC, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fllets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in beams, suspended foors, roofs having slope up to 15* landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to foor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.:Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form work for: Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form work for:Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand)

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)

6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)

Colour washing such as green, blue or buff to give an even shade :New work (two or more coats) with a base coat of whiting

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar work

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter

Supplying and fixing of a Portacabin of size 20'-00" x 10'-00". x 8'-06" with 1 no partition room of size 8'-00" x 10'-00". x 8'-06" of lift & shift type including all fittings & fixtures like door, windows, GI Sheet roof, false ceiling, flooring with 10 mm thick bison pannel, insulation complete with electrical wiring for light, fan, AC (Only points) and other safety installations all complete as per instruction of Engineer in Charge.(As per Annexure F of Scope of Work)

Installation and Commissioning along with training to the operators to run the weighbridge

CAMC for 4 years after 1 year warranty/guarantee period as per Annexure-I of Scope of Work

Total impact of GST for the purpose of CTC

Please Enable Macros to View BoQ information