EI and AC work at Ronald Ross SSKM

Amount

Electrical Installation work

Dismantling the existing damaged BDB, switch board, wiring, cable, fittings & fixture as required very carefully & carrying the same to safe place as per direction of EIC.

Supply & Fxing Double Door 8-Way TPN MCB DB in S.S. enclosure (min 1.5mm thick) with IP-42/43 protection flushed in wall consisting with 1 No., 100 A. and 1 No. 63 A. 4-Pole MCB as incomer & 18 nos., 16 - 32 A. SP MCB as outgoing, complete with DIN Channel, Neutral Bar, Earth Bar , both side cable end box and other accessories & connection with suitable size of Cu. wire with proper socketing incl. necsy. earthing attachment. (Make:- Legrand / Schneider).

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Finolex / Polycab / Havells) partly in 20mm size PVC rigid conduit 'FR' (Precision/Polycab make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex / Polycab / Havells) for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 75x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] - Av. Run 9 Mtrs.

On Board

Supply & Fxing 240V., T.L. Fittings complete with all accessories and necy. connection by 2 x1.5mm² PVC insulated Cu. Wire & painting as follows:-

a) Single industrial box type luminaire with CRCA body . incl S&F 1x 18/20 watts 4 ft LED tube lamp (Lamp Make:-Wipro, Cat no. LL1381-650 / Philips, Cat - 18W 865T81/Crompton LKT8-20] .(Fitting Make : Wipro, Cat - WIO141208 / Philips, Cat TMC501 P 1xT-LED 22W P3241/Crompton IGP 131LK8-16)

b) Twin industrial box type luminaire with CRCA body incl. S&F 2x 20 watts 4 ft LED tube lamp [Lamp Make:-Wipro, Cat no. LL1381-650 / Philips, Cat - 18W 865T81/Crompton LKT8-20](Fitting Make : Wipro, Cat - WIO142208 / Philips, Cat TMC501 P 2xT-LED 22W P3241/Crompton IGP 132LK8-16)

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Anchor) on sheet metal switch board embedded in wall incl. S &F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Distribution wiring in 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Finolex / Polycab / Havells) in 20mm/25mm size PVC rigid conduit 'FR' (Precision / Polycab make) incl. necy. fittings as required

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC (VTPN to TPN DB).

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC (AC Machine).

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC (Power Plug).

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC (Power Plug).

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

S & F 250V 25A Timer controller for AC machine in SS double door (IP 42/43) 2+10-way DB enclosure (Make:- LK/Schnider/ABB Elegance) with S&F following electrical accessories & front door locking arrangement with all connection by finishing the ends of 2x4 & 1x2.5 copper wire dowells solderless socket by crimping method as to GS earthing attachment on wall incl necessary connections as per direction of EIC :- i) 10kA, C-Curve, 240V, 25A DPMCB (LK/Siemens) --- 1 No ii) 24 Hr programmable Digital Timer (LK make cat no 67DDT0) ---- 1 No iii) 3 pole power contractor (LK make cat no MNX 22/230V) with 1 NO +1 NC additional contact block ---- 2 sets iv) 2 Moduler AC motor stater (Make:- Legrand/Myrius) ---- 1 No. v) 2 Module plate with cover (Make :- Legrand/Myrius) -- 1 No vi) 20A Auto-Off-Bipass SPDT toggle switch (Approved/reputed make) ---- 2 Nos. vii) 10A SPST Moduler type switch (Make :- Legrand/Myrius) - 1 No. viii)Outgoing connector make ELMAX (Approved/reputed make) - 2 Nos (Single phase Twin timer)

Part: B (SITC of Airconditioning System):

SITC of 2.0 Tr capacity concealed type Split Air Conditioner of rated cooling capacity of 24000 BTU/hr. with 1 No. Rotary compressor, 1 no. IDU of rated power supply -230V-1ph-50Hz., 1 no. ODU of rated power supply - 230V, 1ph, 50Hz. Air-flow/per IDU:- 800CFM. (Make:Daikin / Mitshubishi Electric / O General) incl. charging of refrigerant R32 / R410 A / R410C

Supply, fabrication & fixing of 2 Nos. M.S Equal Angle of 6mm thick of Size (50mm X 50mm) of 2 m length for making platform for installation 2 Nos of outdoor unit of 2.0/1.5 TR concealed type Split Air Conditioner incl. drilling 2nos hole in each channel including making necessary guarding arrangement of outdoor unit as per site condition as per direction of EIC

Supply & fixing of HVAC grade copper pipe of following sizes for liquid and gas line between ODU and IDU (Make - Ryoku/Nippon):-

(a) 5/8" (gas line).

(b) 1/4" (liquid line).

Supply & fixing of Nitril Rubber insulation for refrigerant copper pipe minimum thickness 9 mm. incl. all accessories as per direction of EIC. (Make - Supreme/Aroflex):-

(a) 5/8" (gas line).

(b) 1/4" (liquid line).

Supply & Laying of 3 core 2.5 sq.mm PVC insulated Copper Cable ("FR") on wall incl. making connections as per direction of EIC.(As Control Cable from ODU to IDU ) ( Make : Havells/ Finolex/ Polycab)

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector,6 mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.

With out angle iron support

100x50x1.25mm (18SWG) --- 2 Nos.

Supply & laying of 25 mm dia PVC Drain Pipe (Medium) including S&F necessary fittings (Make: Supreme/ Oriplast/ Finolex)

TERMS & CONDITIONS :- The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/ submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Defect Liabibility Period 1 (One) year

Make & model of each and every material to be approved by EIC

SUMAN ENTERPRISE (BID ID -5735469)

M/s Singh Electrical Works (BID ID -5638101)