LAC-ADS - Supply, Installation, Testing and commissioning of CCTV at Various places in Wandoor Town - Electronics Work

Amount

Video Surveillance System (CCTV)

SITC of IP Star lite 5MP camera Dome/bullet, 5MP, 1/2.7” CMOS image sensor, low illuminance, high image definition · Outputs max. 5MP (2592 × 1944) @20 fps, and supports 4MP (2688 ×1520) @25/30 fps · H.265 codec, high compression rate, low bit rate · Built-in IR LED, max. IR distance: 50 m · ROI, SMART H.264+/H.265+, flexible coding, applicable to various bandwidth and storage environments· Rotation mode, WDR, 3D DNR, HLC, BLC, digital watermarking, applicable to various monitoring scenes· Intelligent detection: Intrusion, tripwire (support the classification and accurate detection of vehicle and human)· Abnormality detection: Motion detection, video tampering, scene changing, audio abnormality detection, no SD card, SD card full, SD card error, network disconnection, IP conflict, illegal access, voltage detection· Supports max 256 G Micro SD card, built- in Mic · 12V DC/POE power supply, IP67 protection· SMD Plus, 3 year OEM warranty Recomended Make: Dahua/UNV/Panasonic

SITC of ANPR 4MP IP Camera having the following Specifications: 1/1.8" 4 MP starlight CMOS sensor, H.265 and H.264 dual codec, Maximum resolution: 2688 × 1520@25 fps, Built-in 10 mm–50 mm motorized vari-focal lens, The maximum illumination distance is 30 m, IP67 rated. Approved Make: Dahua or eqvt.

SITC of PTZ 4MP IP Camera having the following Specifications: 45x optical zoom, H.265, IVS ,IR Distance up to 250m +25%/-25% wide voltage input,- 40°C~70°C wide temperature range,IP67, IK10 ,PoE+, -20°~90° tilt range Perimeter protection,Smart Capture, SMD Plus Auto-tracking 2.0. Approved Make: Dahua or eqvt

cameras I Smrut Function Suppo1t multiple VCA (Video Content Analytics) events Configurable special crunera sma1t functions, such as VCA detection (motion, line crossing, i.ntn1sion, etc.), heat map, ANPR, ru1d people counting, System accept Digital Intemet protocol High resolution (2K & 4K) crunera signal ru1d recorded for mini.mum 30 days backup. The system should be configured in way to overwrite the data in first-in Make: Dahua/Panasonic/UNV

Supply and Installation of Enterprise class Video Surveillance Hard Disk of 10TB.

26 port Rack mountable Smart managed Gigabit Switch with min 24 10/100/1000 RJ45 ports and 2 SFP ports having Min 48 Gbps bandwidth, Min 8K MAC Address table size, should support IEEE 802.1D Spanning Tree Protocol,100 VLAN Spport,VLAN tagging (Min 64 static VLAN group), Port based VLAN(min 24 Group),IGMP Snooping ,DHCP Client support etc Certifications :- CE, FCC,EN 55024, UL Preferred Model: Cisco, Hp, Netgear or equivalent

Supply and installation of 50" or nearest higher size crystal processor 4K UHD VA panel Smart Business LED Television sets having the following minimum specifications. Resolution: 3840 X 2160, Brghtness: 250nits, USB port: minimum no, HDMI/Optical Component Connectivity, Contrast Ratio: 4700:1,Viewing Angle (H/V): 178/178, Response Time:8ms, The LED TV set shall have Built in Wifi, Bluetooth support, Built in speaker, PC/DVD component connectivity, remote control and wall bracket,Neccessory length HDMI Cable etc complete,3 Years Full warranty and shall be complete as per manufacturer's specification Approved Make: Samsung/NEC/Sony

SITC of sheet steel, phosphatised and painted, dust and vermin proof Wall Mount 15U Rack for switches, Patch panels and accessories including cable manager(x2), AC Distribution box(x1), cooling fan(x2) and hardware mounting kit. Conforms to DIN41494

SITC of High Speed 10.2Gbps HDMI Cable - CL3 Rated - Supports 4K 30Hz, Ultra HD, 3D, 1080p, Ethernet and Audio Return, 5 Meters

Supply and Installation of Gigabit ethernet - 8-port gigabit switch with 2 gigabit sfp ports, PoE (60W). Preferred Make:Airpro/HP/Dlink/Tp Link

SITC of SFP Module-1000Base-LX Fiber SFP,LC duplex connector,1310 nm, for distances up to 10 km,Single Mode Fiber,ROHS Compliant,Compliant with SFP Transceiver MSA specification,Compliant with Specifications for IEEE 802.3z/Gigabit Ethernet,Compliant with Industry Standard RFT Electrical Connector and Cage,Single + 3.3V Power Supply and TTL Logic Interface,EEPROM with Serial ID Functionality,"Laser Class 1 Product which comply with the requirements of IEC 60825-1 and IEC 60825-2". Approved make : Netgear / HP/ Syrotech

Supplying and drawn of 23 AWG Annealed bare solid copper, CAT-6 UTP out door Cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable, Make:Molex/Comscope/Dlink

SITC of 6F Armored OS2 optical fiber cable , Single Mode, 9/125-micron primary coated buffers , 9/125/250 (OS2) micron (OS1 is note accepted) , Corrugated Steel Tape Armour , BELLCORE GR 20 / IEC 794-1 , Water Swellable Glass Yarn , Attenuation @ 1310nm<= 0.34 db/KM MAX - @1550nm <= 0.22 db/KM MAX , HDPE Outer Sheath , THIXOTROPIC Loose Tube Gel , Corrugated Steel Tape Armouring Type ,>0.15 Armouring Type Thickness , PBTP Loose Tube Material , BlackJacket Colour ,2.8 mm Loose Tube Diameter , 2.0 mm Jacket Nominal Thickness , 1250 N Tensile Strength Preferred Make : Panduit/Commscope/Nexans

Supply, Store , Installation, Testing and Commissioning of CAT 6 LSZH U/UTP RJ45 3mtr Patch Cords shall be equipped with 8-pin modular plugs on each end. The cordage sheath shall be made of Low-Smoke, Zero Halogen (LSZH) as per ISO/IEC 60332-3-22: Vertical Flame Spread test. The patch cords will have insertion life of 750 cycles minimum. The cordage shall be UTP components that do not include internal or external shields, screened components or drain wires. Should have Third party ETL verified test certificate for long distance and short distance. Length and color shall be available based on the site requirement

Supply and drawing of High carbon stay wire with all require accessories for drawing the above specified fiber optic cables overhead

Supply and Installation of GI pole with following minimum dimensions . Height 4 meters, dia 4 inch, . The pole will be supplied with all accessories for fixing the cameras.

SITC Of 12 port LIU following specification LC-Style, Simplex, Blue Connector Type , 9/125/250 (OS2) micron (OS1 is note accepted) , 220 cycles SM connectors , Pre-radiused Ceramic Ferrules ,Not more than 0.75 dB per mated pair Attenuation ,Must be drawer style for easy access to pigtail Fiber Optic Patch panels ,1U with 19&rdquo; Rack mountable , Fiber management shelf shall support high density front patching applications. ,Front patching , Applications , Fiber management shelf shall support carrier class fiber management to central offices, Pops, FTTx, mobile systems and LANs. , 1U: 12/24/48 Fiber terminations , Should be &nbsp;supplied loaded with secondary coated 900 Micron LC pigtails , Mounting brackets shall be able to placed in different positions , Easy access to splicing tray , Easy access to back side of connector , Trays with hinges(book type) which allows facilitates easy fiber management and greater access during installation and rework , Fiber guides, radius controls, Adaptor, splice tray, gromet, secure tie isopropyl Accessories , Width- 450 mm &amp; Depth - 280 mm , Height &ndash; 44 mm RAL 7035 / Black&nbsp;Color Approved Make: Panduit/Commscope/Nexans/

SITC of 400W/12V SOLAR PANEL with Poly Crystalline technology, with 5 busbars 60 cells and 25 years performance warranty. Ip 67 rated junction with mc4 connectors and 1 meter wire suitable for outdoor use. Including sutable mounting Structure and accessories. Make: TATA/WAREE/LOOM

SITC of Solar battery having minimum rating 12V 150 Ah Conforms to IS133969- 1992, Tower type Design, Electrolyte level indicator, Ironcard@Tubular technology, Commonside vending, etc including conveyance and all other charges minimum 5 year Manufacturer warranty Make: Exide/TATA/Luminous

SITC of 1000VA/12V Solar inverter including Charge Controller having Maximum Power Point Tracking Charge controller -12V 30A to regulate charging of battery 5 year warranty. Make: WAREE/TATA/LOOM

SITC of Base unit box with Solar panel Stand/Pole. 18 Guage thickness lockable GI Steel/Aluminium box painted and fixed on 100NB pole/stand and should be capable of housing Battery, Inverter, Charge controller and accessories. Preferrable seperate housing for battery.

Supply, installation and testing of 1000 VA,12V pure sinewave home ups/inverter with 1800VAh fully tubular Long Tower type C10 Battery with Battery stand including conveyance and all other charges with the minimum features/ specifications as below. DSP (Digital Signal Processor) based, ASIC (Auto Sense Intelligent Control) Technology, Power factor controlled Battery Charger, LCD Display - displaying State of Battery Voltage and Charge, AC mains input voltage, Display Actual load connected in %, Display overload, Short circuit trip , Battery low trip, AC mains Fuse blown, etc., Electrolyte Level Sensor indicator: For indicating Battery water level low, Protection: High quality protection built up in the PCB. 3 year warranty for both Inverter &amp; Batteries Including necessary wiring from DB to Inverter. Recommended: Luminous/APC/Hykon or Equivalent

SITC of maintenance free Earthing system as per IS 2309 ,IEC 62305 part3, IEC 60364, IEC 62561 part 2, IS 3043, standards, comprises of CPRI tested maintenance free , Low carbon copper coated earth rod of 3m X 1No , electrode having diameter of 14.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 and Universal Clamp (2730 20 VA) made of SS 304 for clamping.

Filling the pit with earth enhancing mineral compound by 5Kg/pit, tested as per IEC 62561-7, TCLP tested for improving the soil conductivity, inert to sub soil and not to pollute the environment and non corrosive to earth rod, having a resistivity less than 0.2 &Omega;m, free from hazardous substances and Polypropylene &amp; Polyethylene (UFE), Earth electrode inspection chamber with heavy duty cover. The dimension shall be 300mm x 300mm x 300mm with a weight bearing capacity of 50KN.

KS Security Systems Home Automation