REPAIRS TO ROADS AND REPLACEMENT OF ROAD FURNITURE AT ARMY AREA BANAR UNDER GE BANAR

Amount

M&L for preparing black top surfaces of roads by brushing with wire brush for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc., complete all as directed and specified.

Repair to potholes, any depth not exceeding 1.0 sqm each, any depth exceeding 30mm, including sweeping free from dust & mud or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well rammed (including supply of road metal) and inspected and approved before laying the premix carpet complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surface in area not exceeding 400sqm, exceeding 50mm but not exceeding 100mm deep and removing the unserviceable materials /debries outside the permises not exceeding 50m away where directed by Engr-In-Charge complete all as specified and directed.

M&L for applying evenly a tack coat with paving bitumen of VG-10 grade at the rate of 10 Kg per 10Sqm on unsurfaced surfaces ie.at potholes complete all as specified and directed.

M&L for laying premixed bituminous macadam with 4.0% (by weight of total mix) binder content using paving bitumen of VG-40 grade rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using power roller of 8 to 12 tonne capacity complete all as specified and as directed.

M&L for bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.50% binder content by weight of total mix using paving bitumen VG-40 grade, mixed in computerized hot mix plant, laying with mechanical paver, rolled and compacted to required camber or gradient using 8 to 12 ton power roller complete all as directed and specified.

M&L for applying evenly a tack coat with paving bitumen of VG-10 grade at the rate of 05 Kg per 10Sqm on unsurfaced surfaces ie.at potholes complete all as specified and directed.

M&L for preparing bituminous road surfaces and marking/painting lines, dashes, arrows, letters etc. on roads, pavements and the like not exceeding 10cm wide, 2.0mm thick with retro reflective Thermoplastic road marking Paint of approved colour, all as per BS-3262-1989 specifications, with 8% glass beads laid in 160 degree centigrade by special applicator machine complete all as per manufacturer's instructions including removing old paint complete all as specified and as directed.

S&F in repairs Solar cat eye aluminum alloy shell (100% water proofing design according to IP65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono-crystalline solar panel 2.4V/ 0.3 watt one Ni-ed rechargeable battery (1.2V/ 1600MA) and consisting of super bright LED with 10,000 to 18,000 mcd fixed with and including MS stud of suitable size as per manufactures instructions etc. including taking out old unserviceable one complete all as specified and directed

S&F in repairs Cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions including taking out old unserviceable one complete all as specified and directed

S&F metal tubular delineator made out of ABS round body fitted with 2 Nos of 65mm dia highly reflective reflectors made of PMMA and mounted on 45/50mm dia MS Pipe medium weight of 600mm height, duly powdered coated and thermoplastic elastomer 3 bands of green, red and yellow reflector, radium tape of 25mm wide strips with anti theft metal net for reflector protection, including embedded in PCC 1:2:4, type B1 using 20mm graded stone aggregate foundation of size 150 x 150 x 300mm complete all as specified and directed

M/S HARIOM CONSTRUCTION COMPANY

ABHOG INFRASTRUCTURE PRIVATE LIMITED

SN TECHNO CONSTRUCTIONS