Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹42.1 L+₹2.4 L (5.94%)Rejected-Finance NEAR DISTRICT HOSPITAL BALLA POST KANHANGAD KASARGOD DISTT KERALA 670531 | 670531 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹42.8 L+₹3.1 L (7.81%)Rejected-Finance C 295 ADG P CHENNAI | CHENNAI | TAMIL NADU | 600001 | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹47.4 L+₹7.6 L (19.2%)Rejected-Finance CHENNAMKULATHI HOUSE ARAKKUNAM PO DIST ERNAKULAM KERALA 682313 | ARAKKUNAM | ERNAKULAM | KERALA | 682313 | L4 | Rejected-Finance Not being L1 |
Tender Value
₹43.1 L
EMD Value
₹86,300
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Trivandrum
Office of Garrison Engineer Army, Thirumala Post, Trivandrum- 695006
PROVN OF 150 USER RCC SEPTIC TANK AND CONNECTING SEWAGE LINE FOR BLDGS NO RA 22, 13, 14 OFFR MD ACCN AT DSC CENTRE AND PROVN OF ATT BATHROOM AND GRANITE TOPPING KITCHEN PALTEFORM IN CL-IV QTR, BLDG NO WL-39 AT WELLESLY LINE AT DSC RECORDS CANNANORE.
2024_MES_662678_1
8163/E8
Open Tender
Civil Works - Canal
Item Rate
180 days
Kannur
As per tender documents
8 documents required · 8 mandatory
₹500
GE Army Trivandrum
₹86,300
Yes
8 Oct 2024
28 Jun 2024
11 Sept 2024
28 Jun 2024
4 Sept 2024
12 Jul 2024
28 Jun 2024 - 5 Jul 2024
Amount
Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) in foundation trenches or drains, not exceeding 1.5 m in width or 10 sqm on plan and not exceeding 1.5 m depth, including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mtr complete all as specified and directed.
Earth work in excavation in ordinary rock by mechanical means (Hydraulic excavator) in foundation trenches or drains, not exceeding 1.5 m in width or 10 sqm on plan and not exceeding 1.5 m depth, including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated meterials as directed, within a lead of 50 m complete all as specified and directed.
Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) over areas, exceeding 30 cm but not exceeding 1.5 m in depth and exceeding 1.5 m in width as well as 10 sqm on plan, including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge complete all as specified and directed.
Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) over areas, exceeding 1.50 mtr but not exceeding 3.00 mtr in depth, exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 3.0 m, as directed by Engineer-in-charge complete all as specified and directed.
Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) over areas, exceeding 3.00 mtr but not exceeding 4.50 mtr in depth, exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 4.5m, as directed by Engineer-in-charge complete all as specified and directed.
Earth work in excavation in ordinary rock by mechanical means (Hydraulic excavator) over areas, exceeding 30 cm but not exceeding 1.5 m in depth, exceeding 1.5 m in width as well as 10 sqm on plan, including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge complete all as specified and directed.
Earth work in excavation in ordinary rock by mechanical means (Hydraulic excavator) over areas, exceeding 1.5 m but not exceeding 3.00 m in depth, exceeding 1.5 m in width as well as 10 sqm on plan, including getting out and disposal of excavated earth lead upto 50 m and lift upto 3.00m, as directed by Engineer-in-charge complete all as specified and directed.
Returning and filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soil obtained from excavation complete all as specified and directed.
Removing excavated materials, soil to a distance exceeding 250 m but not exceeding 500 m depositing where directed at a level 1.5 m above starting point complete all as specified and directed.
Removing excavated materials, rocks to a distance exceeding 250 m but not exceeding 500 m depositing where directed at a level 1.5 m above starting point complete all as specified and directed.
M&L for PCC 1:4:8, Type D2 (using 40mm graded stone aggregate) as in foundation, filling mass concrete or similar works, complete all as specified and directed.
M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster in cement mortar 1:4 on fair faces of brick work/ PCC solid block masonry/ concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for PCC 1:2:4, type B-2, using 40mm graded stone aggregate as in benching, surface channels and drains including necessary form works complete all as specified and directed.
M&L for Pre-cast RCC 1:2:4, type B1 using 20mm graded stone aggregate as in manhole/ drain cover slab etc; set in cement mortar (1:6) complete all as specified and directed. Note: Reinforcement shall be measured and paid seperately.
S&F CRS TMT steel bars as reinforcement, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F CRS TMT steel bars as reinforcement, 6mm to 8mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as concrete bed to drain pipe 160 mm dia bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
S&F 160 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints or jointing with solvent cement, laid in trenches or in floors complete all as specified and directed.
M&L for RCC M-30 (Ready Mix Concrete Design Mix) using 20 mm graded stone aggregate in Foundation, including raft footings, foundation beams, plinth beams, bases for column etc., basement slabs and mass concrete complete all as specified and directed.
M&L for RCC M-30 (Ready Mix Concrete design mix) using 20 mm graded stone aggregate in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.
M&L for RCC M-30 (Ready Mix Concrete design mix) using 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for RCC M-30 (Ready Mix Concrete design mix) using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for providing precast cement concrete 1:3:6 type C1 using 20mm graded stone aggregate, solid building blocks or slabs 10cm thick wall with plain or interlocking joints as directed, setting in cement mortar 1:6 in walls complete all as specified and directed.
Use & waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for falt, fair finished surfaces of concrete complete all as specified and directed.
Use & waste Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for falt, fair finished surfaces of concrete complete all as specified and directed.
Use & waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for falt, fair finished surfaces of concrete complete all as specified and directed.
Use & waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for falt, rough finished surfaces of concrete complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces, mixed with water proofing compound @ 3% by the weight of cement, finishing the surface fair and even complete all as specified and directed. Note: Water proofing compound will be measured and paid separately.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, mixed with water proofing compound @ 3% by the weight of cement, finishing the surface fair and even complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
Supply only integral water proofing compound complete all as specified and directed.
M&L for cement concrete 1:2:4 type B1, using 20 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges including necessary formwork complete all as specified and directed.
M&L for cement concrete 1:2:4 type B0, using 12.50 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and directed.
S&F PVC coated MS rungs 20 mm dia including fixing and embedding in concrete complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with solvent cement or rubber ring joints, fixed to walls complete all as specified and directed.
S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for loose filling with broken stone or boulders aggregates of gauge 40 to 80 mm in soakage pits/ soakage wells as filter media as per drawing complete all as specified and directed.
M&L for loose filling with broken bricks of gauge 80 to 150 mm in soakage pits/ soakage wells as filter media as per drawing complete all as specified and directed.
M&L for laterite stone masonry, squared rubble, regular coursed, well bonded and solidly hearted , built in CM (1:6) complete all as specified and directed.
M&L for providing precast cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate solid building blocks masonry work for 10cm thick wall with plain or interlocking joints as directed, setting in cement mortar 1:4 complete all as specified and directed.
S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F TMT steel bars 5mm dia and over upto and including 10mm dia, cut to length, bent to shape required, as in stirrups, spacers and binders including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for rendering in two layers 10mm thick with cement mortar 1:6 as under coat and 10 mm thick with cement mortar 1:4 as finishing coat, finishing coat mixed with water proofing compound @ 3% by the weight of cement on stone masonry surfaces or surface other than fair face of brick-work on external surfaces of wall, finishing the surface fair and even complete all as specified and directed. Note: Water proofing compound will be measured and paid separately.
M&L for rendering 15mm thick in cement mortar (1:6) on stone masonry surfaces, mixed with water proofing compound @ 3% by the weight of cement, finishing the surface fair and even complete all as specified and directed. Note: Water proofing compound will be measured and paid separately.
M&L for preparing new plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying three coats of white wash on walls surfaces complete all as specified and directed.
M&L for Hardcore (Broken stone Broken or boulders) of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 100mm thick PCC 1:4:8, type D2 using 40mm graded stone aggregate as in sub-base or similar work, complete all as specified and directed.
M&L for joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.
M&L for joint free Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10 mm thick screed bed in cement mortar 1:3 on stone/brick masonry surfaces, complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
S&F 150 mm (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 150 mm size aluminium handles, cast type, anodised complete all as specified and directed.
Taking down cement or cement lime plaster on brick/stone walls or in ceiling surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F 4 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 sq. m each pane complete all as specified and directed.
S&F Vitreous China Wash down water closet pan, white (excluding flushing cistern and flush pipe) pedestal pan and trap including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc complete including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.
S&F flushing cistern, low level,10 Litres capacity, PVC white,valveless syphonic action type, with inlet, ball valve, float and handle including brackets for support, low or high density PVC flush pipe, complete all as specified and directed.
S&F Vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand, waste pipe & connected fittings, complete all as specified and directed.
S&F Health faucet (ABS body) chromium plated, suitable for 15mm dia pipe with flexible LDPE pipe with jet of 1.25m long on one end and socket joint of 15 mm dia on other end including ABS wall hook complete all as specified and directed.
S&F Pillar taps, size 15 mm bore dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, fly-nuts, screwed for iron pipe, complete all as specified and directed.
S&F Bib taps, size 15 mm bore dia, cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F Angle valves, 15 mm bore dia, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed for iron pipe complete all as specified and directed.
S&F Stop valves 15 mm bore dia, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F shower rose, brass, chromium plated 125mm size with or without swivel joints, fixed to steel pipe or union complete all as specified and directed.
S&F Soap dish, vitreous China white, approximate size 160x 160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F 15 mm bore dia unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and directed.
S&F 20 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and directed.
M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints or jointing with solvent cement, laid in trenches or in floors complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.
S&F PVC (SWR) floor trap, outlet 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints or jointing with solvent cement, laid in trenches or in floors complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
M&L for Granite slab or tiles 18mm to 20mm thick as in counter top of WHB or cooking platforms or similar works, (of any type) machine cut, bedded in cement mortar 1:4 including pointing in white cement and marble dust (1:2) with admixuture of pigment to match with shade of granite stone including grinding and polishing complete all as specified and directed.
S&F sinks made of stainless steel, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm, 1mm thick, kitchen or laboratory type with plugs, washers and wastes pipes and waste fittings; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connections, complete all as specified and directed.
Demolition of cement concrete block masonry or similar masonry wall built in cement mortar complete all as specified and directed.
Taking down chowkats or frames with shutters, not exceeding 1.5 sq.m each (without taking off shutters from the frame) and refixing in other openings, complete all as specified and directed.
Cutting openings through old masonry walls built in cement mortar for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and rubbish off the premises complete all as specified and directed.
Forming jambs, etc. to openings, built in cement mortar 1:4, (to foregoing item) with stone obtained from Sl item No.85 hear-in-before, including cutting, toothings and properly bonding into old work, including facing and pointing (if necessary) to match existing work, complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
M & L for structural steel work in tubular trusses or similar works including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
M&L for applying two coats of synthetic enamal paint over a coat of zinc chrome primer including preparation of new steel surface any description, over 10cm widht or girth, etc complete all as specified and directed
M&L for point wiring complete for one light point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multistranded copper conductor drawing in and including 20 mm size non-metallic rigid PVC conduit medium grade inclusive of conduit fittings such as bends, tees, reducers, etc and galvanised iron sheet steel terminal boxes of size 16 gauge thickness, for housing light switches, sockets with 3 mm thick bakelite laminated sheet fixed with brass screws and cup washers including one continuous run of 1.50 Sqmm nominal area single core PVC insulated unsheathed FRLS cable 1100 volts grade with multistranded, copper conductor green colour for earth continuity connected to earth dolly complete all as specified and directed.
All as per SI item No. 90.00 here-in-before, but for One fan point controlled by one way switch complete all as specified and directed.
S&F switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.
S&F Ceiling rose, 3 terminals/PVC/ polycarbonate, size 65mmx50mm complete all as specified and directed.
S&F self ballast LED batten light fittings, extruded thermoplastic body with PC diffuser in unique square shape >120 degree wide distribution, 4 feet long, LED batten 1x 20W, 220V, AC, CCT 6500 K decorative box type with driver, holder including LED tube light including connection upto ceiling rose with flexible copper twin twisted wire complete all as specified and directed.
M & L for submain wiring with using two single core 6.0 Sqmm multistranded copper conductor PVC insulated and unsheathed (FRLS) cable and one single core 6.0 Sqmm multistranded copper conductor PVC insulated and unsheathed (FRLS) as earth wire using ISI marked IS 694, 1100 volts grade, PVC insulated flexible multistranded copper conductor wire drawn through with and including medium grade concealed PVC conduit ISI marked not less than 25 mm dia including conduit fittings and accessories complete including cutting chases in existing wall of any description built in cement mortar and making good the disturbed surfaces in cement mortar (1:4) and finishing the surfaces to match with existing surfaces and finish termonation with bottle type copper lugs conduit being laid either in ceiling slab or wall or on surfaces or under the frame of the false ceiling including PVC flexible conduit or through wooden partition including clamping arrangement as required complete all as specified and directed. NOTE: Two runs of 6.0 sqmm copper cables and one run of 6.0 sq mm copper cable along with white colour PVC conduit with accessories will be measured as one unit length.
S&F MCB SP 6-32 Amps, 240V, breaking capacity 10 KA 'B' series 240 volts, 50 Hz complete all as specified and directed.
S&F MCB SPN 40-63 Amps, 240V, breaking capacity 10 KA 'C' series, 240 volts, 50 Hz complete all as specified and directed.
S&F MCB distribution board, double door, sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral conforms to IS 13032-1991, 4-way with 200 Amps rated bus bar complete all as specified and directed.
Supplying, fixing, testing & commissioning BEE 5 star rated exhaust fan AC metallic body single phase 230/ 240 V, 300 mm sweep with louver and all mounting accessories, including making exhaust vent hole for exhaust fan of size 300 mm sweep on the wall of toilet and suitable length of twin twisted flexible copper wire of size 40/0.0076 Sqmm from ceiling rose to fan connector and all connecting accessories complete suitable for 230 AC, 50 Hz complete all as specified and directed.
M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below normal ground level, connected to galvanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts and washers of the earth and thimbles and other end of the earth GI wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade raised up to a level of 50cm above ground level with plug at top, earthing pit in PCC (1:3:6) type C-1 RCC pre-cast (1:2:4 type B-1) cover slab of 50 mm thick using 8.00mm dia CTD bars reinforcement both ways at 140 mm centre to centre with handle, 20 mm dia GI pipe medium grade for watering pipe, wire mesh, funnel and providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/ loose soil, returning, refilling and removing of surplus soil to a distance not exceeding 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed. (Note: If the desired resistance is not find, earthing shall be done by the contractor at no extra cost to Govt.).
M/S AMBATTU CONSTRUCTIONS (BID ID -3073121)
EURO ENTERPRISES (BID ID -3080555)
M/S AARJAY ASSOCIATES (BID ID -3083359)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .