RRD to GWSS Gumrah in Tehsil Shillai Distt. Sirmour (HP) (UNDER PDNA)

Excavation in foundation and trenches in all type of soil such as pickwork jumper work Kankar, moorum, shingles including decomposed soft and hard rock etcupto all heights stacking the excavated earth not more than 3mtrs clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundations etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth in all leads and lifts as per the direction of Engineer in-charge.

Providing and laying cement concrete 1:4:8(1cement:4approved sand:8app.graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

Providing and laying cement concrete 1:1.5:3(1cement:1.5approved sand:3approved graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Foundation and plinth including entire carriage of material upto all leads and lifts.

Wall (any thickness but not less than 0.1m thickness) attached pillasters,buttresses plinth and string courses etc. from top to foundation level upto floor two level and as per the direction of Engineer-in-charge.including entire carriage ofmaterial upto all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish. Including centring,shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4mtrs and removal of the same for insitu reinforced concrete and plain concrete work in:-

Flat surfaces such as soffits of suspended floors, roofs, landings and the like, floors etc., up to 200mm in thickness.

Vertical surface such as wall of (any thickness) partition and the like including attached pillaster buttresses plinth and string courses and like and as per the direction of Engineer-in-charge .including entire carriage of material upto all leads and lifts.

Providing and laying reinforced cement concrete work 1:2:4 ( 1 cement :2 sand :4 graded stone aggregate 20 mm nominal size ) excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies beams, girders bressumers and cantilevers upto floor two level in all heights and depths includiing all leads lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing tor steel reinforcement for RCC work including bending,binding and placing in position complete upto floor two level.as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

Providing and fixing Man hole cover with frames for man holes of size 500mm internal dia meter C I cover (medium duty) the weight of cover to be not less then 58 Kg including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Welding testing of GMS pipe/Nipple conforming to IS 1978-1982 or equivalent with bevelled edge and capable of with standing required test pressure, in random length of 4-7 meter i/c testing and commissioning and cost of jointing with butt welding as per relevant BIS specification(leak proof) i/c cost of bends tails pieses, tees, reducer increaser etc. as per site requirement as per the direction of the Engineer in charge earth work in tranches to be measured and paid for saperately.including all leads, lifts and carriage of materials at site

Providing and fixing of various type of fitting material at common header point complete with all leads & lifts as per direction of the engineer in charge

Gi Nipple 15mm dia.

Gi Union 15mm dia.

Gi Brass wheel valve 15mm dia.

Gi Elbow 15mm dia.

Please Enable Macros to View BoQ information