Construction of New Kanya Chhatralaya (S.T.) at Netramali, Taluka-Idar, Dist. Sabarkantha

Name of work :- Construction of New Kanya Chhatralaya

(S.T.) at Netramali, Taluka-Idar, Dist.

Bill of Quantities

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

1 Excavation for foundation upto 1.5 m depth including sorting 1514.00 Cum 157.08

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

2 Excavation for foundation for depth from 1.5 m to 3.0 m 584.00 Cum 287.47

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(C)

3 Filling available excavated earth (excluding rock) in 2187.00 Cum 136.92

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

4 Filling in plinth with sand under floors including watering 98.00 Cum 481.81

ramming, consolidating and dressing complete

5 Filling in foundation and plinth with murrum or selected soil 492.00 Cum 294.39

in layers of 20cm. thickness including watering, ramming

and consolidating etc. complete.

6 Providing and laying controlled cement concrete M.150 for 266.00 Cum 4201.60

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundations, footings,Base of columns and Mass concrete

7 Providing and laying controlled cement concrete M.250 and 299.00 Cum 4519.75

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass concrete.

8 Providing and laying controlled cement concrete M250 and 28.00 Cum 6952.84

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Column Up to

9 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 24.00 Cum 3374.11

coarse sand : 8- Machine Crushed stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

10 Providing and laying controlled cement concrete M.250 and 73.00 Cum 6002.43

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work for Ground and Plinth Beams

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

11 Brick work using common burnt clay building bricks having 118.00 Cum 4214.33

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)

12 Providing and laying controlled cement concrete M.200 and 102.00 Cum 7865.52

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, Pillars posts and struts, For All Floors.

13 Providing and laying controlled cement concrete M.200 and 106.00 Cum 7963.49

curing complete including the cost of formwork (Vertical

fins and vertical sun breakers.) and reinforcement for

reinforced concrete work in (B) Walls, for all floor level

14 Providing and laying controlled cement concrete M.200 and 216.00 Cum 6136.23

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Beams For All Floors.

15 Providing and laying controlled cement concrete M.200 and 390.60 Cum 6441.40

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Slab for All Floors.

16 Providing and laying controlled cement concrete M.200 and 36.00 Cum 6454.21

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Lintels For All Floors.

17 Providing and laying controlled cement concrete M.200 and 11.00 Cum 6989.40

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Chajja For All Floors.

18 Providing and laying controlled cement concrete M.200 and 22.00 Cum 6905.88

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (E) Staircases

19 Providing TMT Bar FE 500D reinforcement for R.C.C. work 171708.00 Kg. 77.29

including bending, binding and placing in position complete

20 Providing throating or plaster drip and moulding to R.C.C. 218.00 Rmt 43.08

Chhajja by making 5mm to 15mm wide grove as per design

21 Brick work using Common Burnt Clay building bricks 582.00 Cum 4538.60

having crushing strength not less than 35 kg./Sq.Cm. in

Super structure Above plinth level up to All Floor levels in

Cement Mortar 1:6 (1- Cement : 6 -fine sand) (Conventional)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

22 Half brick masonry in common burnt clay building bricks 612.00 Sqmt 691.76

having crushing strength not less than 35 Kg/Sq.Cm. in

Superstructure above plinth level upto All Floor level in

Cement mortar 1:4 (1- Cement : 4 -coarse sand )

(Conventional).

23 Providing & Fixing Chicken mesh for joint between brick 331.00 Sqmt 173.72

work & RCC work fixing with nail & GI washer as per

director in charge

24 Providing 15mm thick cement mala plaster in single coat on 4678.00 Sqmt 269.96

Rough (Similar)side of single or half brick walls for interior

plastering and finished even and smooth fininshing with a

floating coat of neat cement slurry in (i) Cement mortar 1:3

(1-cement:3-sand), 10x10 mm groves etc. Complete for All

25 Providing 10mm thick cement mala plaster in single coat on 3666.00 Sqmt 241.32

brick/concrete walls for interior plastering and finished even

and smooth fininshing with a floating coat of neat cement

slurry in (i)Cement mortar 1:3 (1-cement:3-sand). Complete

for All Floors.

26 20mm thick sand faced cement plaster with Gutka Finish on 1848.00 Sqmt 321.10

walls upto height 15 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand)

and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) with 5mm grooves, etc. complete.

27 Providing Water Proofing Treatment on Sunk Slab including 183.00 Sqmt 370.67

cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal size) laid in one layer

and finished with a floating coat of neat cement average

50mm thick to prepare slope including water proofing

chemical etc. Complete for Sunk Slab for All Floor.

28 Applying two coats of putty & two coats of primer of 7872.00 Sqmt 40.59

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth.

29 Wall painting (three coats) with plastic emulsion paint of 4260.00 Sqmt 125.52

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

30 Ceiling painting (three coats) with plastic emulsion paint of 3659.00 Sqmt 131.02

approved brand and manufacture on ceiling and soffits of

slab surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

31 Finishing wall with weather proof exterior emulsion paint 2213.00 Sqmt 93.93

(two coats) with Damp Proof Coating (one coat) on wall

surface to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

32 Providing and laying polished Kota stone slab flooring over 1587.00 Sqmt 1019.00

20mm (Average) thick base of cement mortar 1:6 (1-cement :

6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

sand) laid over and jointed with grey cement slurry mixed

with pigment to match the shade of slab including rubbing

and polishing etc. complete. (A) 25mm thick

33 Providing and laying polished kota stone slab 25mm thick in 105.00 Sqmt 1166.93

risers of steps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed

with gray cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete.

34 Providing and fixing pre-cast Rubber Dye / steel Dye inter 1096.00 Sqmt 706.93

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC :

SP 63-2018 etc. Complete.

35 Providing and fixing Machine cut & Polished kota stone in 50.00 Sqmt 1355.42

7.5 cm width Strip flooring for Ramp even grade over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

36 P & L 24" x 24" Ceramic 10 mm thick tile flooring over 20 246.00 Sqmt 1266.54

mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for

37 Providing and laying coloured glazed tiles of the size 300 1196.00 Sqmt 1487.88

mm x 450 mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

38 Providing and laying Ceramic tiles 6mm thick in skrting 14.00 Sqmt 1090.32

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

39 Providing and fixing Machine cut, Free edges, Mirror 93.00 Sqmt 2464.40

Polished Granite stone slab flooring 18mm thick laid on

20mm (Average) thick base of cement mortar 1:6 (1-cement :

6-coarse sand) for Trade & Riser including Half Round

moulding front edge of trade jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete.

40 Providing and fixing Machine cut, Free edges, Polished 438.00 Sqmt 2510.86

Green Granite stone slab flooring 18mm thick for vertical

wall/Doors/Windows Sill, Jams for cladding as per design

including full moulded round inside edge and laid on10mm

thick base of cement mortar 1:3 (1-cement : 3-coarse sand)

jointed with grey cement slurry mixed with pigment to match

the shade of slab including rubbing and polishing etc.

41 Providing and laying water prooofing treatment with china 728.00 Sqmt 1132.21

mosaic tiles flooring over avg 50 mm C.C. 1:2:4 bedding

maintaining slope for plain and curve surface & 12 mm to

mm broken pieces not more than 2.5 cm of ceramic/ of

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

42 Constructing Sandwich Platform of 18mm thick polished 50.00 Sqmt 2760.33

black or selected granite at top and 25 mm thick kota stone

with 75cm height with necessary support using 20mm thick

cement mortar 1:3 for sandwich and fitting at bottom &

edges with waterproof rigid adhesive including making

necessary grooves in walls with vertical support of double

kota stonr sandwich every 60cm centre to centre including all

labour material of approved quality including full moulded

round front edge fixed in wall for partition.

43 Providing and fixing flush door with Single shutters, solid 155.00 Sqmt 4129.89

core construction with frame of first class hardwood with

cross board and finished with 1 mm thick laminate on both

side of shutter, machine glued PVC beading on periphery

including 30cm long Stainless Steel Pipe handle on both side

SS ASIS 304 grade, SS Stopper 20cm, SS Aldrop 30cm both

side, anodised alluminium butt hinges with necessary screws.

(B) Non-decorative type and block board core anodised

alluminium butt hinges in flush door shutters (2) 35 mm

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

44 Providing and fixing flush door with Double shutters, solid 12.00 Sqmt 5279.27

core construction with frame of first class hardwood with

cross board and finished with 1 mm thick laminate on both

side of shutter, machine glued PVC beading on periphery,

including 30cm long Stainless Steel Pipe handle on both side

SS ASIS 304 grade, heavy duty Floor Spring each side, SS

Stopper 20cm, SS Aldrop 30cm both side, anodised

alluminium butt hinges with necessary screws. (B) Non-

decorative type and block board core anodised alluminium

butt hinges in flush door shutters (2) 35 mm thick.

45 Providing and fixing window having extruded aluminum 144.00 Sqmt 1738.21

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with rubber gasket and

airlock strip anodiazed aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

etc. With Mosquito net shutter in outer track.

46 Providing and fixing standared extruded of alluminium 16.00 Sqmt 2131.10

section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg /

Rmt with colour anodized alluminium frame with 5 mm

thick transparent bronze colour tinted float glass as details

etc complete for Fix window with Mosquito net.

47 Providing and fixing Louvers in G.I Channel 40x32x5mm 101.00 Sqmt 2215.94

size And 114mm Wide G.I Sheet Having Thickness of

0.55mm & Weight Not Less Than 490 Gm/Mtr. Roll Formed

to create 84mm wide Louver snap fixed on special shaped

G.I Channel,Channel shall be Finished with Powder Coating

of 55 micron For Fix Louvers As Directed By Engineer In

48 SIGNAGES ON DOOR :Providing and fixing 304 grade 42.00 Nos. 1262.50

stainless steel 1.5mm thick brushed steel finish plate fixed on

a door using S.S studs and with punched (laser cut) lettering

carried out on S.S plate of required size and text as directed

by engineer etc. complete. Size 30 cm x 15 cm

49 Providing erecting and fixing double coated ISI water tank of 20000.00 Litre 3.95

required capacity each with all necessary fittings and

connection etc. complete on terrace

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

50 Providing, laying and jointing in true line and level 110 472.00 Rmt 876.11

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length

x 145 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of

51 Providing, laying and jointing in true line and level 160 408.00 Rmt 834.38

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 160 mm diametre x 210 mm length

x 196 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of

52 Providing laying and jointing in true line and level 50mm 86.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

53 Providing laying and jointing in true line and level 25mm 655.00 Rmt 91.84

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

54 Providing laying and jointing in true line and level 15mm 350.00 Rmt 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

55 Providing and fixing concealed center point to wall ceiling & 105.00 Rmt 253.82

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. 25 mm.

56 Providing and fixing concealed center point to wall ceiling & 150.00 Rmt 170.36

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. 15 mm.

57 Providing and fixing Gun metal check or non-return fullway 17.00 Nos. 420.63

wheel valve.(C) 25mm dia.

58 Providing and fixing ball cock of approved. quality as 2.00 Nos. 189.84

directed.(A) Copper Metal (ii) 50mm dia.

59 Providing and fixing C.P. brass shower rose with 15mm or 40.00 Nos. 282.16

20mm inlet.(A) 100mm dia. Each

60 Providing and fixing wash down water closet (Wall Hung 23.00 Nos. 5172.51

type, W.C. Pan) with integral P or S trap, Health Fauset

Heavy Duty with hook and PVC dual flush tank with

complete fittings including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover

to be measured and paid for separately)(A) vitreous China

Pattern :(i) in white colour

61 Providing and fixing washbasin (ii) Flat Back washbasin 550 15.00 Nos. 2180.72

mm x v 400mm size. (i) In white colour including with

approved sanitary grade material with CP waste coupling,

waste pipe, 15mm dia Pillar & Stop Cock of approved brand

with connection 15mm dia flexiable pvc pipe etc. complete

62 Providing and fixing Kitchen sink with C.I. or M.S. brackets, 2.00 Nos. 2987.87

painted white including cutting holes in walls (C) Vitreous

China Sink.(i) 600mm x 450mm x 150mm size including

approved sanitary grade material with CP waste coupling,

waste pipe, 15mm dia Pillar & Stop Cock of approved brand

with connection 15mm dia flexiable pvc pipe etc. complete

63 Providing and fixing screw down bib taps of following 85.00 Nos. 186.83

size.(A) Brass screw down bib tap polished bright. (i) 15mm

64 Providing and fixing PVC SWR Nahni trap IS 14735 for 51.00 Nos. 586.60

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

65 Providing and fixing S.W. gully trap with C.I. grating brick 40.00 Nos. 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type

66 Providing and fixing C.P. brass towel rail comlete with C.P. 29.00 Nos. 616.42

brass brackets fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size.

67 Providing and fixing 600mm x 450mm bevelled edge mirror 12.00 Nos. 859.41

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

68 Providing and fixing in position PVC cowel went to pipes 12.00 Nos. 75.75

69 Constructing brick masonry chamber for underground C.I. 20.00 Nos. 3660.76

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete

etc. complete.(ii) Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two inlets.

70 Providing and laying (to level or slopes) and jointing with 6.00 Rmt 531.18

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete and Providing and laying Cement concrete 1:5:10

(1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm

nominal size) bedding for stoneware pipes of following

internal diameters with necessary formwork and curing

complete.(B) 150mm dia.

71 Providing and laying (to level or slopes) and jointing with 6.00 Rmt 352.73

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete and Providing and laying Cement concrete 1:5:10

(1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm

nominal size) bedding for stoneware pipes of following

internal diameters with necessary formwork and curing

complete.(A) 100mm dia.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

72 Applying general insecticide pest control treatment to floors, 819.00 Sqmt 80.62

cupboards etc including labour materials etc. complete.

Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%

concentration by mass) is recommended 10.5ml chemical

diluted with 5 liters of water application 0.5 litre chemical

/Sqm of surface is recommended as per I.S.

73 Providing and fixing Safety Grills of required pattern for 4765.00 Kg 110.60

windows/door using MS polished bars, Rectangular CRS

Pipes of size 50mm x 30mm x 2mm or Required at required

spacing as per design and hold fast with coach bolts

including one coat of and two coats of matt finished oil

painting etc. complete

74 Providing and fixing a set of wall mounted 38mm dia. U 1.00 Nos. 2323.00

shaped horizontal stainless steel collapsible grab bar, 38mm

vertical stainless steel fixed grab rail of grade SS 304 from

round pipe supported and 75mm dia 8mm thick SS 304 base

flange on wall including anchor fastners, nuts, accessories as

per detailed drawing etc. complete as directed by architect or

engineer in charge.

75 Providing and fixing of conspectus tape 50mm width on of 160.00 Rmt 1923.04

treads in staircase including cutting pasting etc. As per

harmonised guidelines complete in all respect to the entire

satisfaction of engineer in charge.

76 Providing and fixing 90 cm high Stainless Steel railing made 91.00 Rmt 3760.33

from anticorrosive 304 grade S.S. pipe of 50 mm dia. (16

gauge) as hand rail with S.S.304 grade baluster of 32 mm dia

(16 gauge) as a vertical support fixed in RCC Slab/ steps of

stair at 1.2 mt. c/c including three horizontal S.S. pipes of

mm dia (16 gauge) at equal distance fixed by 16 mm dia (16

gauge) S.S. pipe with baluster including accessories as per

detailed drawing as directwed etc. complete

77 Providing and Fixing 8mm thick poly- Carbonate fiber sheet 14.00 Sqmt 2940.82

using sealant water proofing rubberished adhesive oil painted

50x50mm hollow channel for framing of shade as require

and fixing frame with surrounding wall etc. completed as

78 Steel work, welded in built up sections framed work 114.00 Quintal 9108.48

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

79 Painting two coats (excluding priming coat) on external 130.00 Sqmt 22.75

surface of new rain water, soil, waste and vent pipes and

fittings with ready mixed bituminous brushing, black,

anticorrosive to give an even shade including cleaning of

all dirt, dust and other foreign matter. (B) 75mm dia.

80 Excavation for foundation upto 1.5 m depth including sorting 185.00 Cum 268.21

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(C) Hard Murrum

81 Excavation for foundation for depth from 1.5 m to 3.0 m 65.00 Cum 136.92

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

82 Providing, laying, spreading and compacting stone 78.00 Cum 1820.79

aggregates of specific sizes to water bound macadam (Grade-

II) (B.T. Metal of size 45 to 63 mm) specification including

spreading in uniform thickness, hand packing, rolling with

wheeled steel/ vibratory roller in stages to proper grade and

camber, applying and brooming requisite type of screening/

binding Materials to fill up the interstices of coarse

aggregate, watering and compacting to the required density.

83 Providing and Casting in situ controlled Cement Concrete M- 601.00 Cum 4553.38

200 for R.C.C. Raft and cutt-off walls including necessary

shuttering laying, vibrating, ramming and curing complete.

84 Clearing and grubbing road land including uprooting rank 1.00 Hectare 28455.10

vegetation grass bushes, shrubs, sapling and trees girth up to

300 mm removal of stumps of trees cut earlier and disposal

of unserviceable materials (C) By mechanical means in area

of light jungle

85 Earthwork in cutting including preparing the slope and 82.00 Cum 500.05

camber and stacking or utilising the cutting stuff in bank as

directed upto 200 Meters from the end of cutting with all

lead and lift.(i) Hard murrum.

86 Providing and laying controlled cement concrete M.150 and 12.00 Cum 7426.53

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work for Coping

87 Providing & laying weep hole in Aburtments, and returns by 340.00 Each 86.73

using A.C. pipe of 100mm including laying in proper grede

and jointing the completed as per detailed specification.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

88 Providing and fixing concertina coil fencing with punched 170.00 Rmt. 565.60

tape concertina coil 600 mm dia 10 mt openable length

having 50 no rounds per 6 mt length, upto 3mt height of wall

with existing angle iron (50mm x50mm x5mm )requird

shaped As per Directed Engeenier in charge. placed 2.4mt or

3.00mt apart and with 4 horizontal R.B.T. reinforced barbed

wire(3 mm) , stud tied with G.I. staples and G.I. clips to

retain horizontal, including necessary bolts or G.I.barbed

wire tied to angle iron, all complete as per direction of

Engineer-in-charge, with reinforced barbed tape

(R.B.T.)/Spring core (2.5 mm thick) and weight

gm/meter at compound wall for ESR M4/intakewell.

89 Steel work, welded in built up sections framed work 21.00 Quintal 9108.49

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

90 Drilling of pilot bore hole of size 250/300 mm diameter at 250.00 Rmt 1544.29

above site by mud finish direct rotary rig etc. complete

91 Reaming of 250/300 mm diameter pilot bore hole to size 450 200.00 Rmt 742.35

mm diameter including assembling, lowering housing, casing

strainer pipes with gravel packing and clay ball packing etc.

92 Providing 600 CFM / 150 PSI capacity air compressor upto 1.00 Job 25118.70

available of sand free discharge ( Minimum 6.0 Hours)

93 Supply of reducer made frim 6 mm thick plate (M.S.) for 1.00 Nos. 2009.90

ERW pipe of size (ii) 200 mm dia. x 250 mm dia. X 600 mm

94 Supply of 200 mm diameter V-wire screen pipe of slot size 65.00 Rmt 1401.88

1.0 mm nominal hole etc. complete.

95 Supply of M.S. Bore clamps with 3 holes on either side with 1.00 Pair 1753.36

nuts and bolts of standard make and suitable size (g) 750 mm

x 75 mm x 16 mm flat to 200 mm dia. Pipe.

96 Supply of Bore Plug having 100 mm height made from M.S. 1.00 Nos. 834.26

plate with 3 holes at equal distance on circumference for nuts-

bolts type, locking arrangement with nut-bolts & lock nuts of

standard make complete. (b) from 5 mm thick M.S. plate (for

top also) (ii) suitable for 200 mm dia. pipe.

97 Supply of M.S. Bail Plug having length of 0.45 mtr from 1.00 Nos. 907.99

medium class pipe as per I.S.S. suitable for (b) 200 mm

diameter pipe etc. complete.

98 Supply of Steel Bent plates suitable to ERW pipe for (b) 200 8.00 Nos. 71.71

mm diameter and 150 x 150 x 6 mm size etc. complete.

99 Supply of Gravel of size selected size up to 4mm to 6 mm, 12.00 Cmt 2295.73

including stacking and filing etc. complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

100 Charges for uptron make Electrologger (with carting ) of 1.00 Job 12120.00

pilot bore hole etc. complete.

101 Charges for Geo Hydrological ground water investigation 5.00 Job 16160.00

including water sample chemical analysis etc. complete.

102 S.I.T.C. submersible pump set suitable for bore of 150 mm 1.00 Each 49148.62

dia or more having 3 phase motor capacity not less than

HP with following capacity. Lifting and Lowering taken

extra. [C] 25 stage 160 to 100 LPM discharge at 185 to

mtr head for 50 mm dia delivery pipe

103 Providing and erecting PVC corrugated Flexible conduit with 175.00 Rmt 26.26

required numbers of coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (3) 32 mm diameter

104 Lowering of submersible motor pump set complete with 1.00 Job 2568.43

required. Nos. and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after checking of

threads of each pipe with coupling to take the load of the

pump set and pipe assembly filled up with water. (B) Above

60 mtr and up to 120 mtr

105 Supplying and erecting approved make motor control cubical 1.00 Each 8710.24

panel (Direct - on - line) made from 16 G. CRCA sheet duly

epoxy powder painted inside and outside with hinged doors

and locking, arrangement consisting of suitable size of ON-

OFF isolator (AC - 3/23 duty) main fuses, single phasing

preventer, indicating lamps for R-Y-B phases, overload

relay, automatic water level controller, Ammeter, Voltmeter

each with two way selector switch incoming, wires duly

socket crimped, main contactor & overload relay, start-stop

push buttons, to be erected on angle iron frame grouted on

wall as directed. The isolator, overload relay & contactors

will be of L&T, Seimens or BCH make only (a) DOL upto

106 Supplying and erecting XLPE (IS:7098) (I)-88 ISI 200.00 Rmt 136.35

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size. (E) 3 core 2.5 Sq. mm

107 Providing laying and jointing in true line and level 50mm 150.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

108 Providing and fixing butterfly valve of IS approved brand 2.00 Nos. 1595.80

109 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 1.00 Nos 958.17

size having weight not less than 35Kg.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

110 Providing and filling in foundation with ordinary Cement 27.00 Cum 3345.59

concrete M-100 mix and providing necessary vertical pin

headers including formwork, vibrating, ramming and curing

111 Earthwork for embankment including breaking clods, 2356.00 Cum 131.93

dressing with all lead and lift (including watering and

consolidation)(A) From Borrow pits within land width

112 Rolling and consolidation of soling including filling in 2073.00 Sqmt. 22.75

depression which occur during the process, with power roler

8 tonne to 12 tonne..

113 Box cutting the road surface to proper slope and camber for 272.00 Cum 109.05

making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

114 Construction of B.I.T.C. granular sub base by providing 109.00 Cum 1380.96

granular material of Grading II, spreading in uniform layers

with motor grader on prepared surface , mixing by mix in

place method with front end loader at OMC , and compacting

with vibratory roller to achieve the desired density ,complete

115 Compaction and finishing of cement concrete road by trimix 464.00 Sqmt. 72.72

process providing extra labour charges for the trimix vaccum

dewatering service process on cement concrete road surface

by using vaccum dewatering pump floater surface vibrator

including making rough finish to surface as per in including

levelling the complete.

116 Supplying and fixing reinforced concrete heavy duty non- 40.00 Rmt. 660.00

pressure pipes with collars for culverts carrying heavy traffic

as per IS 458-1991 specifications including setting the pipes

in C.M. 1:2 watering and laying (to level or slopes) of class

NP3 of following internal daimeters.(i) 300mm dia.

117 Construction of Cattle trap made from ISMC 100 border and 8.00 Sqmt. 6146.86

G.I. pipe 50 mm dia. Heavy duty at 12cm spacing by welding

and for supports 2 nos. I.S.M.C. 100x75x6 section fixing in

prepared chamber as per drawing.

118 Constructing Brick masonry road gully chamber 500mm x 16.00 Nos. 2017.20

450mm x 600mm including 500mm x 450mm C.I. horizontal

grating wih frame complete.

119 Supplying of yellow or Goradu soil with all lead and lift 138.00 Cum 505.00

including spreading watering dressing and rolling with hand

roller etc complete selected soil

120 Supplying of well rotted FYM manure with all lead and lift 7.00 Cum 378.75

including spreading mixing dressing and rolling with hand

roller etc. complete

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

121 Scarifying the surface of soil including spreading of DAP 459.00 Sqmt. 26.26

fertilizer mixing with soil properly leveling ground dressing

122 Supplying and planting Dibbling semi carpet lawn at distance 328.00 Sqmt. 90.90

of about 15 cm x 15 cm after proper anti termite treatment

and rolling the same by hand roller and watering etc complete

123 Bowling and developing flowering plants grown in nursery 15.00 Nos. 505.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Bottom Palm

124 Bowling and developing flowering plants grown in nursery 15.00 Nos. 656.50

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Triangle Palm

125 Bowling and developing flowering plants grown in nursery 15.00 Nos. 80.80

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Jasud

126 Bowling and developing flowering plants grown in nursery 15.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Croton

127 Bowling and developing flowering plants grown in nursery 20.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

128 Bowling and developing flowering plants grown in nursery 20.00 Nos. 70.70

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton Petra

129 Bowling and developing flowering plants grown in nursery 20.00 Nos. 40.40

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton Petra Live Plant

130 Bowling and developing flowering plants grown in nursery 20.00 Nos. 101.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Golden Durenta Varigated

131 Bowling and developing flowering plants grown in nursery 20.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Crotons Variety

132 Bowling and developing flowering plants grown in nursery 250.00 Nos. 35.35

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahindi

133 Bowling and developing flowering plants grown in nursery 20.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Varigated Ficus

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

134 Bowling and developing flowering plants grown in nursery 20.00 Nos. 70.70

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted New Black Ficus

135 Bowling and developing flowering plants grown in nursery 250.00 Nos. 45.45

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted White Ribbon Plants

136 Bowling and developing flowering plants grown in nursery 250.00 Nos. 60.60

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahendi border

137 Bowling and developing flowering plants grown in nursery 15.00 Nos. 95.95

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Pendulla Asopalav

138 Bowling and developing flowering plants grown in nursery 15.00 Nos. 121.20

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Potted Plants

139 Labour charges for planting various plantsafler proper anti- 980.00 Nos. 70.70

termite treatment in pits including placing properly and

filling the pits with required prepared mix soil and watering

and dispporting etc. complete

140 Maintance of the garden for 60 days after Complition of 3 1.00 Job 25250.00

month stipulated period is completed for plantation of lawn

and plants including applying second round of proper anti-

termite treatment

141 Rubber Hose Pipe 15 mm dia of approved brand and make 75.00 Rmt 90.90

142 Providing and fixing G.I. Nipple as directed 5.00 Nos. 50.50

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

143 Providing laying and jointing in true line and level 40mm 60.00 Rmt 148.12

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

144 Providing and fixing brass screw down stop tap.(A) 15mm 3.00 Nos. 205.83

145 Providing & Laying Rain Water Junction Chamber of Clear 10.00 Nos. 6241.80

Internal Size 0.60 x 0.60 x 0.75m with excavation of size

1.36 x 1.36m & 0.15m thick M200 Bed Concrete Including

brick masonary 0.23 thick wall in C.M. 1:6 of 0.75m height

with 15mm thick Cement Plaster inside & outside (1:4),

x 1.06 RCC M200 top slab of thickness 0.15m with TMT

steel and 455mm x 610mm cast iron manhole cover with

frame weight not less than 35 kg as per directed by Engineer-

146 Providing & Laying Filter chamber of brickwork 0.23 thick 10.00 Nos. 22067.49

in C.M. 1:6 of clear internal size 2.04m x 1.20m x 1.20m and

excavation dimension of 2.80m x 1.96m x 1.35m including

C.C. M200 Bed Concrete 0.15m thick and RCC M200 Top

slab of thickness 0.15m with TMT steel, Including 15mm

(1:4) thick cement plaster inside & outside with Cement

slurry & top cover with frame of minimum weight of 35kg,

including filling filter material of 200mm thick each layer of

25-40mm, 10-20mm of BT metal and sand as per directed by

engineer-in-charge

147 Providing & Laying Water Harvesting Pit of clear size 2.00 1.00 Nos. 32558.36

mt x 2.00 mt x 4.00 mt. For water logging with excavation in

any strata upto four meter depth, Brick work 0.23 thick in

C.M. 1:6 of clear internal size 2.00m x 2.00m x 1.20m with

15mm thick C.M. 1:4 plaster, filling the pit with B.T. metal

40mm in 0.60 mt. depth with 25-40mm kaptchi, 0.30 mt.

depth and 2mt. depth with coarse sand in layers including

makng P.V.C. line for water inlet etc. as directed with

250mm dia bore 15mt. depth amd 150mm dia PVC pipe of

10 Kg.f/cm2 casing wih gravel packing or as directed.

148 A Pump Room. Supply & fixing Diesel engine driven min. 1.00 Nos. 555500.00

pump of S5 mt. head and 137 M3/ Hr. capacity with

RPM diesel engine with battery charger. Base plate, AVM

pad etc. complete as directed including necessary concrete

platform as directed. (Make:-L)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

149 Fire Pumps & Accessories, Yard Hydrant, Internal Hydrant, 1.00 Nos. 153924.00

Hose Reel & Sprinkler System Supply, Installation, Testing

& Commisioning of Main Fire Pump Of Capacity 20 H.P.

with 55 mtr. Head, Pump

150 Supply, Installation, Testing & Commisioning of control 1.00 Nos. 90900.00

Panel suitable for automatic operation of fire fighting pumps

consisting (a) Necessary cabling, wiring, earthing from panel

to individual equipment shall be included in the quoted price.

(b) Facility for more selection i.e. auto or manual. (c)

Protection failure and control cabling. (d) Interlocking of

pressure switch with pumps.

151 Supply, Installation, Testing & Commisioning of 150mm 1.00 Nos. 3535.00

dia. Pressure Gauge of range 0 - 15 kg/cm3 confirming to as

per specification complete as required.

152 Supply, Installation, Testing & Commisioning of Pressure 1.00 Nos. 4545.00

Switches for automation of fire pumps, Pressure switches

shall be double pole, single throw type suitable for 3 phase

supply with diaphragm. Alluminium Enclosure with IP

protection as required.

153 Supply, Installation, Testing & Commisioning of the 40.00 meter 2390.67

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows /

reducers / couplings / unions / bends / flanges etc. and laying

on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required.A)150 mm dia

154 Supply, Installation, Testing & Commisioning of the 45.00 meter 1711.95

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows /

reducers / couplings / unions / bends / flanges etc. and laying

on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required.b)100 mm dia

155 Supply, Installation, Testing & Commisioning of the 10.00 meter 1277.65

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows /

reducers / couplings / unions / bends / flanges etc. and laying

on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required.c)80 mm dia

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

156 Supply, Installation, Testing & Commisioning of the 50.00 meter 1100.90

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows /

reducers / couplings / unions / bends / flanges etc. and laying

on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required.d)65 mm dia

157 Supply, Installation, Testing & Commisioning of the 45.00 meter 989.80

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows /

reducers / couplings / unions / bends / flanges etc. and laying

on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required.e)50 mm dia

158 Supply, Installation, Testing & Commisioning of the 40.00 meter 858.50

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows /

reducers / couplings / unions / bends / flanges etc. and laying

on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required.f)32 mm dia

159 Supply, Installation, Testing & Commisioning of the 150.00 meter 555.50

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows /

reducers / couplings / unions / bends / flanges etc. and laying

on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required.g)25 mm dia

160 Supply, Installation, Testing & Commisioning of C.I. 1.00 Nos. 9738.42

Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets

complete as required. A)150 mm dia

161 Supply, Installation, Testing & Commisioning of C.I. 2.00 Nos. 8932.44

Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets

complete as required. b)100 mm dia

162 Supply, Installation, Testing & Commisioning of C.I. 2.00 Nos. 5555.00

Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets

complete as required. c)50 mm dia

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

163 Supply, Installation, Testing & Commisioning of Cast iron 1.00 Nos. 9090.00

Dual plate Check valve (PN 1.6) a)150 mm dia

164 Supply, Installation, Testing & Commisioning of Cast iron 2.00 Nos. 7564.90

Dual plate Check valve (PN 1.6) a)100 mm dia

165 Supply, Installation, Testing & Commisioning S.S. Single 3.00 Nos. 5656.00

Headed Fire Hydrant Valve with 80mm N.B. Flanged inlet,

63 mm dia. Female instantaneous outlet type S.S. coupling,

blank cap, chain, twist release type lug & all accessories

Confirming to IS:5290. Including fixing with supports,

flanged tapping from wet riser, orifice plate.

166 Supply, Installation, Testing & Commisioning of Weather 2.00 Nos. 4595.50

proof standard M.S. Fire Hose Cabinet wall mounting type

(450mm x 450mm x 250mm deep) having single or double

opening with necessary locking arrangement by allan key

suitable for housing 1 nos. hose pipe, 1 nos. Branch pipe &

nozzle spanner.

167 Supply, Installation, Testing & Commisioning non 2.00 Nos. 5641.86

percolating rubber reinforced lined Fire Hose pipe (as per

IS:636) of 63mm dia and 15 mtr. Long. The hose shall be

rated for burst pressure pf 35.7kg/sqcm. Hose shall be

complete with ISI marked SS male & female coupling

(IS:903) bound & riveted to hose pipe with copper rivets &

1.5mm copper wire.

168 Supply, Installation, Testing & Commisioning of 63mm dia. 2.00 Nos. 5641.86

Instantaneous pattern SS 304, short branch pipe, 20mm dia

nozzle confirming to IS

169 Supply, Installation, Testing & Commisioning of First Aid 2.00 Nos. 6565.00

Hose Reel equipment conforming to 15:884 comprising of

hose reel drum, 8 mm shut off noz:z.le, Ru bber hose of

mm dia x 30 mtr. long, painting, swinging type fixing

bracket, anchor fastener, bolts & nuts etc.

170 Supply, Installation, Testing & Commisioning of SS Ball 2.00 Nos. 858.50

Valve. A) 25mm dia.

171 Supply, Installation, Testing & Commisioning of Cast Iron 2 1.00 Nos. 8585.00

Way Fire Brigade Inlet as per 1S: 904 having 63 mm dia

in/et with blank cap and chain with necessary fit ti ngs,

flanges, nut bolts etc. complete as required. (For Hydrant

172 Supply, Installation, Testing & Commisioning of Gun Metal 1.00 Nos. 959.50

Air Release Valve with necessary fittings. Size: 25mm (For

173 Supply, Installation, Testing & Commisioning of Quartzoid 30.00 Nos. 454.50

Bulb type Sprinkler Heads. A) Pendent Sprinkler 57°C

174 Fire Alarm System Alarm panel Microprocessor based 8 zone 1.00 Nos. 16665.00

175 Manual Call Point 3.00 Nos. 454.50

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

176 2 core x 1.5 sqmm wire with pvc conduct and required 250.00 Rmt. 166.65

177 Smoke Detector 30.00 Nos. 1565.50

178 II) Fire Extinguisher and Exit Signages Supply, installlation, 10.00 Nos. 6447.84

testing and commissioning of Carbon Dioxide (CO2) type

Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI

marked / TAC approved fitted with required accessories

including wall suspension brakets.

179 Supply, Installation, Testing & Commisioning of ABC type 10.00 Nos. 2222.00

6kg confirm IS:15683, with ISI marked / TAC approved

fitted with required accessories including wall suspension

180 Signage Boards 25.00 Nos. 252.50

181 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 7.00 Sqmt 1311.18

mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for light

182 Providing and fixing window having extruded aluminum 4.00 Sqmt 1713.70

Colour anodized section frame main outer size 63.50 x

x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of

0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm

x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, vertical member of size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with

mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

complete for window.

183 Excavation for foundation upto 1.5 m depth including 40.00 Cum 272.57

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

184 Excavation for foundation for depth from 1.5 m to 3.0 m 14.00 Cum 498.93

including sorting out and stacking of useful materials and

disposing of the excavated stuff upto 50 Meter

lead.(C) Hard Murrum

185 Providing and laying cement concrete 1:5:10 (1- Cement : 5- 3.00 Cum 2566.77

fine sand : 10- graded brick bat aggregates 40mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

186 Brick work using common burnt clay building bricks having 15.00 Cum 4214.33

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(B) Conventional

187 Half brick masonry in common brunt clay building bricks 15.00 Sqmt. 618.79

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in

foundation and plinth (B) Conventional

188 Providing and laying cement concrete flooring 1:2:4 (1- 20.00 Sqmt. 352.01

cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating

coat of neat cement. (B) 50mm thick.

189 Providing 15mm thick cement plaster in single coat on 88.00 Sqmt. 184.78

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-sand)

190 Providing and Laying ordinary cement concrete 1:2:4 (1- 4.00 Cum 6888.15

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in (iii) Slabs having more than

10 cm and upto 13 cm. thickness

191 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 4.00 Nos 958.17

size having weight not less than 35Kg.

192 Providing and laying (to level or slopes) and jointing with 10.00 Rmt 317.48

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete.(B) 150mm dia.

193 Providing, laying and jointing in true line and level 110 234.00 Rmt 876.12

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length

x 145 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of

194 Providing and Constructing sock pit of 2.46 mt. dia outside 2.00 Nos 35192.44

and 4 mt depth with honey combed masonary 6.50 mt. from

bottom and 0.60 mt. brick masonary in C.M. 1:6 top with

RCC slab cover of M200 vent pipe 1.8mt. Long 75mm dia &

C.I. cover and cowel vent etc. comp

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

195 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 399.00 Pts 485.81

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete.Cat-III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

196 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 157.00 Pts 674.68

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed..(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete.Cat-

III (Make:- Honeywell, L&T, Havells, Indoasian, Legrand)

197 Point wiring for Individual Plug with & earth wire of 1.5 88.00 Pts 510.05

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of

accessories. [I] For 6A Plug and 6 a switch with 2-1.5

sq.mm Cu. Wire from nearby switchboard/mcb db board (f)

with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling completeCat-III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

198 Point wiring for on board Looped Plug with 6A Modular 158.00 Pts 257.55

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories.Cat-III

(Make:- Honeywell, L&T, Havells, Indoasian, Legrand)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

199 Providing following type of Modular Type Accessories 3.00 Nos. 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (3) Two Pin/RJ-11

Telephone Socket[A] For One Gang Cat.III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

200 Providing following type of Modular Type Accessories 3.00 Nos. 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (4) TV Co-axial

Socket outlet Cat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

201 Providing following type of Modular Type Accessories 158.00 Nos. 25.25

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (7) Blank Plate

Single Cat.III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

202 Providing following type of Modular Type Accessories 33.00 Nos. 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (8) Computer RJ-

45 socket Cat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

203 Providing following type of Modular Type Accessories 61.00 Nos. 180.79

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (9) 16 Amp. SP one

way switch Cat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

204 Providing following type of Modular Type Accessories 61.00 Nos. 199.98

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (10) 6/16Amp.

Universal socket Cat-III (Make:- Honeywell, L&T,

Havells, Indoasian, Legrand)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

205 Providing following type of Modular Type Accessories 16.00 Nos. 604.99

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (21) Foot Light as

per colour requirement with concealed box, modular

accessories, acrylic glass cover with suitable LED watt with

all accessories as per following module (c) Six modules

Cat-III (Make:- Honeywell, L&T, Havells, Indoasian,

206 Providing and erecting ISI mark Medium class RIGID PVC 1260.00 Mtrs. 33.33

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (b) 25 mm

207 Providing and erecting ISI mark Medium class RIGID PVC 160.00 Mtrs. 54.54

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (c) 32 mm

208 Providing & erecting PVC Corrugated Flexible Conduit with 240.00 Mtrs. 21.21

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (2) 25 mm

209 Providing & erecting PVC Corrugated Flexible Conduit with 120.00 Mtrs. 27.27

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (3) 32 mm

210 Supplying and laying UPVC cable trunking system 25.00 Mtrs. 428.24

comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with

necessary end caps Internal and external bend, flat bends,

coupler, tee etc..All necessary accessories and measuring of

following sizes (2) 100 mm x 50 mm trunking

211 Providing and erecting Mains with 1.1 KV grade FRLS PVC 5166.00 Mtrs. 82.82

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm (Make: -RR Kabel,

Havells, Avocab, KEI,Johnson)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

212 Providing and erecting Mains with 1.1 KV grade FRLS PVC 2256.00 Mtrs. 112.11

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories (a)

wire 4 sq. mm (Make: -RR Kabel, Havells, Avocab,

213 Providing and erecting Mains with 1.1 KV grade FRLS PVC 630.00 Mtrs. 425.21

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories (i)

wire 10 sq. mm (use earth wire of 4 sq.mm ) (Make: -RR

Kabel, Havells, Avocab, KEI,Johnson)

214 providing and erecting Mains with ISI marked, 1.5KV grade 150.00 Mtrs. 91.91

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (f) One wire 10.00 sq. mm

215 providing and erecting Mains with ISI marked, 1.5KV grade 30.00 Mtrs. 300.98

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (i) One wire 35.00 sq. mm

216 Supplying and erecting Flexible PVC insulated multi strand 278.00 Mtrs. 22.22

multi core 1.1 kv grade ISI marked copper wires of following

size to be erected as directed. (c) 1.00 Sq.mm 2 core round/

flat PVC sheathed

217 Supplying and erecting Flexible PVC insulated multi strand 180.00 Mtrs. 46.46

multi core 1.1 kv grade ISI marked copper wires of following

size to be erected as directed.e) 1.50 Sq.mm 3 core round

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

218 Providing & Erecting approved make following size of TV 135.00 Mtrs. 62.62

Co-axial flexible cable comprising inner conductor of solid

bare copper insulated with Foam PE & Secondary conductor

made of poly - Aluminium film bonded Al. Braids @

suitable coverage overall sheathed with black PVC

insulation. e).RG-11

219 Supplying & erecting approved make Telephone Cable 75.00 Mtrs. 20.20

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a) Unarmoured 2)

220 Supplying & erecting approved make LAN cable of 1056.00 Mtrs. 47.47

following size in existing pipe as per direction [C] CAT -

221 Providing & erecting main Distribution (MDF) indoor type, 4.00 Nos. 994.85

back mounted frame as per DoT standard approved with

krone strips(a) Suitable for 10 pair

222 Supplying & erecting M.S. Box having 16 Gauge painted 14.00 Nos. 88.88

with red oxide or Heavy duty PVC box erected flushed on

wall or concealed in wall with necessary plastering &

finishing as directed of following size. (c) 200 mm x 250 mm

223 Providing & erecting Switch board for Computer or electric 33.00 Nos. 1133.22

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with

single mounting base frame covered with textured/metallic

/white front plate,modules erected with necessary

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories.Cat-III

(Make:- Honeywell, L&T, Havells, Indoasian, Legrand)

224 Decorative call bell Ting-tong box type 250 volts complete 1.00 Nos. 71.71

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

225 Supplying and erecting LED indoor fittings with LEDs of 313.00 Nos. 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Tube Light with

integral/ non-integral driver . (iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet Cat III (Make:- Wipro,

LT,Philiphs,Havells,Jaquar)

226 Supplying and erecting led lamps with following wattage 45.00 Nos. 112.11

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp holders,

pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (i) 5 to 8 watts Cat-III (Make:-

Wipro, LT,Philiphs,Havells,Jaquar)

227 Supplying and erecting LED street light / Flood light fittings 20.00 Nos. 4997.48

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection.(ii) above 48 to 60 Watts Cat-III (Make:- Wipro,

LT,Philiphs,Havells,Jaquar)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

228 Supplying and erecting LED street light / Flood light fittings 10.00 Nos. 8453.70

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (B)

Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection.(v) above 120 to 160 watts Cat-III (Make:- Wipro,

LT,Philiphs,Havells,Jaquar)

229 Supplying and erecting LED street light / Flood light fittings 2.00 Nos. 4819.72

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (C)

Post Top Lantern LED fitting comprises of finish cast

aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting driver

and accessories wired upto terminal block.IP 65 (ii)32-40W

Cat-III (Make:- Wipro, LT,Philiphs,Havells,Jaquar)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

230 Providing and erecting Approved make Four pole moulded 25.00 Nos. 6173.12

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

(Make:- Indoasian, L&T (LK), ABB, Schneider)

231 Providing and erecting Approved make Four pole moulded 5.00 Nos. 8055.76

case circuit breaker having breaking capacity ICU of 35 KA.

at 415 V. having normal current rating 125A. with Fixed

thermal & magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III (Make:- Indoasian,

L&T (LK), ABB, Schneider)

232 Providing and erecting Approved make Four pole moulded 2.00 Nos. 20946.39

case circuit breaker having breaking capacity ICU of 35 KA.

and above at 415 V . having normal current rating 250A.

with variable thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III (Make:-

Indoasian, L&T (LK), ABB, Schneider)

233 Providing and erecting Approved make Four pole moulded 1.00 Nos. 25228.79

case circuit breaker having breaking capacity ICU of 50 KA

and above at 415 V having Normal current rating 400A.

with variable Thermal & magnetic release suitable to work

on A.C.supply 50 c/s. With all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III (Make:-

Indoasian, L&T (LK), ABB, Schneider)

234 Supplying & erecting approved make Four Pole 415V 1.00 Nos. 22255.35

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

(F)400A (Make:- Indoasian, L&T (LK), ABB, Schneider)

235 Providing and erecting Approved make Earth fault Relay 1.00 Nos. 5415.62

suitable to mount with inter connection suitable to following

size of moulded case circuit breaker having CT ratio &

MCCB rating as following along with shunt trip 220V AC.

with all internal connections & complete erected in existing

M.S.housing. (3) 250 A -400 A , CT Ratio 1/400

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

236 Supplying and erecting triple pole & neutral 440V / 500V 12.00 Rn.Mtrs 1961.42

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary connections.

(A) Suitable for 100 Amp. Capacity

237 Supplying and erecting triple pole & neutral 440V / 500V 9.00 Rn.Mtrs 3202.71

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary connections.

(B) Suitable for 200 Amp. capacity

238 Supplying and erecting triple pole & neutral 440V / 500V 2.00 Rn.Mtrs 7319.47

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary connections.

(D) Suitable for 400 Amp. capacity

239 providing and erecting Miniature circuit breaker single pole 32.00 Nos. 270.68

0.5A to 2A system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III (Make:- Indoasian, L&T (LK), ABB,

240 Providing and erecting Miniature circuit breaker single pole 168.00 Nos. 112.11

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark Cat-III

(Make:- Indoasian, L&T (LK), ABB, Schneider)

241 Providing & erecting 240 V MCB double pole switch for 6.00 Nos. 295.93

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity (B) 40 Amp. Cat-III (Make:- Indoasian, L&T

(LK), ABB, Schneider)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

242 Providing & erecting 415 V MCB Four Pole for Motor & 16.00 Nos. 737.30

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

capacity (B.) for 63 Amp. Cat-III (Make:- Indoasian, L&T

(LK), ABB, Schneider)

243 Providing and erecting Sheet Steel powder coated MCB 14.00 Nos. 2913.85

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door (ii)6

way (Make:- Indoasian, L&T (LK), ABB, Schneider)

244 Providing and erecting Approved make RCCBs conforming 42.00 Nos. 2235.13

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max.

rating erected as directed (iI) 40 Amps.DP Cat. III (Make:-

Indoasian, L&T (LK), ABB, Schneider)

245 Providing and erecting metallic vitrified danger notice board 5.00 Nos. 69.69

as per language suggested by engineer incharge for

MEDIUM VOLTAGE installation to be erected as per IS-

246 Providing and erecting Annealed bare Copper wire 8 to 16 30.00 Kgs. 794.87

247 Providing and erecting Pipe type earthing having 150 20.00 Nos. 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

248 For using salt and charcoal / coke as required for pipe type 20.00 Nos. 171.70

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

249 Supplying & erecting earth pit of minimum bore dia.150mm 5.00 Nos. 4591.46

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

250 Providing & erecting weather proof, dust & vermin proof, 9.00 Sq.Mtrs. 14902.55

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval

from engineer incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet

for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size

of inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with

following size.(B) The standard companies switch gear shall

be used and only manufacturers at CPRI approved factory (i)

with 350mm depth

251 Providing , erecting , fabricating the M.S. structure as per 140.00 Kgs. 77.77

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete

with cutting, welding, grinding & finishing duly painted with

one coat of red oxide with erection on site as per direction of

engineer in charge with necessary grouting, cementing,

plastering & finishing complete.

252 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 190.00 Mtrs. 220.18

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (B) 3 1/2 core 35 Sq. mm (

16 Sq. mm 1/2 core) (Make: -RR Kabel, Havells, Avocab,

253 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 120.00 Mtrs. 490.86

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (E) 3 1/2 core 95 Sq. mm (

50 Sq. mm 1/2 core) (Make: -RR Kabel, Havells, Avocab,

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

254 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 360.00 Mtrs. 904.96

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (H) 3 1/2 core 185 Sq. mm

( 95 Sq. mm 1/2 core) (Make: -RR Kabel, Havells, Avocab,

255 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 230.00 Mtrs. 117.16

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (A) 4 core 4 Sq. mm

(Make: -RR Kabel, Havells, Avocab, KEI,Johnson)

256 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 550.00 Mtrs. 140.39

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (C) 4 core 10 Sq.

mm (Make: -RR Kabel, Havells, Avocab, KEI,Johnson)

257 Making trench in soft soil of suitable width of 90 cm deep 455.00 Mtrs. 55.55

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

258 Making trench in Hard Murrum / Tar Road of suitable width 227.50 Mtrs. 74.74

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.

259 Making trench in Hard Murrum / Tar Road of suitable width 91.00 Mtrs. 357.54

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground. (B) If additional

machinery like hammer driller or JCB use [Add]

260 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 60.00 Mtrs. 263.61

cm. below ground across the road crossing or on floor with

necessary material in an approved manner and making the

ground as per original. (E)150 mm dia

261 Providing & laying approved make Double walled 824.50 Mtrs. 62.62

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (A)

50 mm Outer Dia

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

262 Providing & laying approved make Double walled 306.00 Mtrs. 137.36

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (D)

120 mm Outer Dia

263 Providing & laying approved make ISI marked Rigid PVC 50.00 Mtrs. 236.34

pipe having 6Kg / cm2 (Class-3) to be erected at road

crossing on or floor as directed for laying of cable. The pipes

as following size of dia & weight per 6 mtr.(F) 110 mm inner

Dia. (11.63 Kg/6 RMT)

264 Providing and, fixing heavy duty flange type brass cable 20.00 Nos. 33.33

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (A) 2 to 4 core 2.5 / 4 Sq. mm

265 Providing and, fixing heavy duty flange type brass cable 44.00 Nos. 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (C) 2 to 4 core 10 Sq. mm

266 Providing and, fixing heavy duty flange type brass double 8.00 Nos. 75.75

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (B) 3 & 1/2

core 35/50 Sq. mm

267 Providing and, fixing heavy duty flange type brass double 8.00 Nos. 131.30

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.(D) 3 & 1/2

268 Providing and, fixing heavy duty flange type brass double 2.00 Nos. 238.36

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (G) 3 & 1/2

core 185 Sq. mm

269 Solder less crimping type Aluminium lugs conforming to IS 80.00 Nos. 6.06

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (A)

270 Solder less crimping type Aluminium lugs conforming to IS 176.00 Nos. 13.13

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (B)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

271 Solder less crimping type Aluminium lugs conforming to IS 32.00 Nos. 20.20

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (D)

272 Solder less crimping type Aluminium lugs conforming to IS 32.00 Nos. 40.40

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (F)

273 Solder less crimping type Aluminium lugs conforming to IS 8.00 Nos. 80.80

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. ( I )

274 Providing and erecting Approved make Ceiling fan with 157.00 Nos. 1596.81

double ball bearing ISI mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be approved by

Engineer in charge] (Make:- Crompton, Havells, Orient)

275 Supplying and erecting 19 / 20 mm. nominal bore Medium 157.00 Mtrs. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leckage and earthing.

276 Supplying & erecting fan hook box of 10 mm M.S. round 157.00 Nos. 108.07

bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box / Heavy Duty

PVC box complete erected concealed in Ceiling with

necessary finishing.

277 Supplying & erecting single phase approved make industrial 40.00 Nos. 2054.34

exhaust fan suitable for medium duty ring mounted low noise

operation suitable for medium duty having following dia size

and maximum speed in RPM [A] 305 mm dia 900 RPM

Cat.II (Make:- Crompton, Havells, Orient)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

278 Supplying and erecting approved make Octagonal pole made 20.00 Nos. 8192.11

from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering

site requirement.(D) 6 Mtr. Long 70 mm Top X 135 mm

bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary G.I.

J Bolts .Approx Pole weight 59 kg

279 Supplying & erecting approved make SMC press moulded 12.00 Nos. 515.10

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.(b) 250mm x

200mm x 100mm [deep]

280 Providing street light pole bracket comprising main B Class 20.00 Nos. 561.56

MS pipe of 4.2 cm/require outside dia. complete with

suitable B Class M.S. sleeve tubing of approx. 45cms.length

and suitable for 76.5 mm / 80mm. / require size pole top

having sufficient fastners for fixing the brackets and having

spread of 1 mtr. length with suitable rise as per site condition

& suitable welded stiffener reducer and nipple with check

nut complete painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint. paint with

following nos of arms. [A] Single Arm bracket 1 Mtr

281 Supplying & erecting approved make Digital time switch 2.00 Nos. 3168.37

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with

necessary connection erected as directed.

282 Supplying & erecting power contactor ,AC3 duty for time 2.00 Nos. 2782.55

switch complete erected as per direction Cat III (Make:-

Indoasian, L&T (LK), ABB, Schneider) [D] 4 pole 440V

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

283 Providing & Erecting full SS Body (SS 304) Split type water 5.00 Nos. 61115.10

cooler having storage capacity 160 to 175 Ltr.(Tank SS 304)

& Cooling capacity 150 ltr. Per hour @ an ambient temp of

350 C.The outlet temp. of the water should drop by 150C

within a hour,The water cooler should be comprising of

hermetically sealed Reciprocating compressor with R134A,

fan motor, Copper Condensing unit with company fabricated

Outdoor Unit water tank surrounded by evaporating coil,

thermostats, relay etc.complete with necessary copper tube &

Insulation, M.S Chanel Stand with Painting for water tank &

M.S. Powder Coated Stand for Outdoor unit with

Installation. With DPELCB and 4 Way DB Box with

accessory Three core Cord for connection.(Make:- Blue

Star,Usha,Voltas)

284 Supplying and erecting water filter cum purifier with ultra 5.00 Nos. 5424.71

violate technology. (Aquaguard / waterdoc model or

equivalent symphony/ crystal/videocon model)

285 Supplying & erecting 5 stage single reverse osmosis water 5.00 Nos. 29187.99

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity 80 psi, mention with

40 psi inline type post carbon filter auto low & high pressure

switches with following size of storage tank & LPH capacity

& erected as directed[C] 50 Ltr / Hr with 150 psi 2 nos

286 Supplying and erecting horizontal / vertical mounting type 20.00 Nos. 11455.42

storage water heater with copper container housed in

M.S./S.S./ABS body insulated with glass wool/puff complete

with heating elements,adjustable thermostats 300C to 850C,

indicating lamp, safety valve, fusible plug, etc.complete

erected with coach bolts, nuts. washers & cementation (C)25

Ltr. with 2 KW. heating element Premium Category

287 Supplying and erecting chromium plated heavy duty brass 20.00 Nos. 181.80

valve for inlet pipe of water heater 15 mm dia.)

288 Supplying and erecting 15mm brass non-return valve for 20.00 Nos. 232.30

inlet pipe of storage water heater.

289 Supplying and erecting dead pressure releasing valve for 20.00 Nos. 385.82

storage type water heater with necessary materials.

290 Providing & erecting fibre reinforced PVC flexible pipe with 80.00 Rmts. 181.80

brass locking nuts & washers & clips at both ends complete

erected without leakage

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

291 Supplying, installing, testing & commissioning of SOLAR 5.00 Nos. 189956.76

WATER heating system as per prevailing IS code

comprising of Solar flat locket collector, stainless steel hot

water storage isolated tank with S.S. heat exchanger,

absorber made of copper sheet & copper tube of following

capacity in liter / day (LPD) with "B" size aluminium box

collector with appropriate capacity electrical backup

arrangement (Excluding inlet & outlet pipe lines) (E)

Capacity of 1000 LPD

292 Supplying & erecting resin bonded flap rock wool / glass 450.00 Mtrs. 767.60

wool with conductivity valve 1.67 sq.mm per watt & to with

stand the temp. to 100 degree centigrade C thickness 50mm

with G I pipe of following size dia "B" class as per IS:1239.

The plastic sheet to be used as covering of glass wool. Al.

cladding besides other materials like chicken mesh, 26 G Al.

Sheet shall be used for cladding the insulation pipe.(E) for

293 Supplying and erecting approved make panel mounting type 5.00 Nos. 1275.63

Digital Voltmeter having 3 digits LED display, 0 to 750 AC

Volts range erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

294 Supplying and erecting approved make panel mounting type 5.00 Nos. 1558.43

Digital Ammeter having 3 digits LED display, external CT

operated, calibrated for 0 to 1000 Amps suitable to operate

on 500 Volt AC , erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

295 Providing & erecting L.T. Current Transformer with bar 15.00 Nos. 274.72

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter

296 Supplying and erecting approved make suitable panel 15.00 Nos. 43.43

indicator LED type lamp, lens cover, complete erected with

necessary connections.

297 Providing & erecting open well horizontal mono block pump 2.00 Nos. 15707.52

set with cast iron body, complete for three phase

submersible motor having[C] For 3 HP 3 phase open well

horizontal mono block pump set suitable for 85 LPM to

LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm dia

delivery pipe Cat.II (Make:- Crompton, Lubi )

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

298 Supplying & erecting approved make motor control cubical 2.00 Nos. 7722.46

panel (Direct - on - line) made from 16 G. CRCA sheet duly

epoxy powder painted inside and outside with hinged doors

and locking, arrangement consisting of suitable size of ON-

OFF isolator (AC - 3/23duty) main fuses, single phasing

preventer, indicating lamps for R- Y - B phases, overload

relay, Automatic water level controller, Ammeter, Voltmeter

each with two way selector switch incoming, wires duly

socket crimped, main contactor & overload relay, start - stop

push buttons, to be erected on angle iron frame grouted on

wall as directed. The isolator, overload relay & contactors

will be of L & T, Siemens or BCH make only.(A) DOL up to

299 Providing and erecting ISI marked PVC insulated PVC 90.00 Mtrs. 146.45

Sheathed Flat flexible Submersible copper cable approved

make of following Size. (C) 3 Core x 4 Sq. mm

300 Providing Water proof straight Joint in PVC insulated flat 2.00 Nos. 189.88

flexible copper cable by using insulating material, water

proofing material, & making the joint complete. (A) Up to

301 Supplying of following size of HEAVY UPVC column pipe 30.00 Rmts. 359.56

with coupler and wire lock [B] 50 mm dia

302 Supplying, & erecting C.I. swing, check type non-return 2.00 Nos. 1020.10

(Reflux) Valve -ISI marked suitable for following size (A)

303 Supply of following size of TOP & BOTTOM accessories 2.00 Per Set 1489.75

i.e. Adaptor set (CI) long, pump guard set, starter pipe

Rubber ring for submersible pump & UPVC column pipe as

directed by Engineer - in - charge with necessary plumbing

as desired.[D] 50 mm dia

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

304 Supplying, Erecting, Testing & Commissioning the 1.00 Nos 1575617.17

passenger / stretcher lift having following main features:[1]

GEAR LESS LIFT DRIVE (MRL) comprising of High

Starting torque Lift 3 phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with high efficiency

shall be used.[2] Micro processor based / PLC, ACVVVF,

vector control drive with encoder feedback closed loop

system shall be used for lift car and door operation which

shall be full collective selective operation hall call demand

response, UP/DOWN hall stops, Main, Up/ Down Contactor

with overload and phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate size and

to sustain the impact load cabin + passenger with safety

factor of fire for steel and side panels of Stainless steel of

sheet of grade 304 duty. Car ceiling will be S.S. finishes with

aesthetic appearance with LED ceiling lights. Car flooring

shall be of s/s 304 chaker plate design sugeested of engineer

in charge. of engineer in charge. Car doors shall be of

stainless steel grade 304, hairline finish with centre opening /

telescopic automatic doors. Car panel will also be S.S.

finished with emergency stop device, mechanical door safety

device, facility of auto/ attended mode. All car panel buttons

and all floor switches must be with brail language as per lift

act.[4] All landing doors must be fire rated for 2 hour shall

be fully automatic centre opening/ telescopic opening made

of hairline finish steel grade of 304 with key holes and

infrared curtains with Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car

along with alarm switch shall be provided. Also, Emergency

Light & Fan should start immediately without any Time

Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow

along with floor position indicator shall be provided inside

the car and at all floors.

[7] Full height infra red curtain with multiple cross / crossing

light beams shall be provided.

[8] Automatic Rescue Device (ARD) shall be provided

accordingly of passenger capacity with Manual Rescue

Operation ( Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over

loading shall be provided such that doors kept open till

excess load is removed. [10] Spring buffers/PU Buffers

shall be provided.

[11] Car fan as per passenger capacity with automatic sleep

timer shall be provided.

stainless steel grade 304, hairline finish with centre opening /

telescopic automatic doors. Car panel will also be S.S. 304 Estimated

Rates Total Amount

Rates Total Amount

Item finished with emergency stop device, mechanical door safety according

Item of work Quantity Unit

No. device, facility of auto/ attended mode. All car panel buttons In figure to estimated

and all floor switches must be with brail language as per lift quantities

act.[4] All landing doors must be fire rated for 2 hour shall

1 be fully automatic centre opening/2 telescopic opening made 3 4 5

of hairline finish steel grade of 304 with key holes and

infrared curtains with Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car

along with alarm switch shall be provided. Also, Emergency

Light & Fan should start immediately without any Time

Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow

along with floor position indicator shall be provided inside

the car and at all floors.

[7] Full height infra red curtain with multiple cross / crossing

light beams shall be provided.

[8] Automatic Rescue Device (ARD) shall be provided

accordingly of passenger capacity with Manual Rescue

Operation ( Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over

loading shall be provided such that doors kept open till

excess load is removed. [10] Spring buffers/PU Buffers

shall be provided.

[11] Car fan as per passenger capacity with automatic sleep

timer shall be provided.

[12] Voice annunciator with suitable music shall be provided

[13] Self diagnostics system for operational and safety

parameters shall be provided in control panel.

[14] Mechanical over speed governor with governor

calibration as per actual site parameters and submission of

calibration certificate submission, door key holes in the floor

doors, fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine

room and monkey ladder for lift pit should be provided by

the lift agency, along with the other steel structure works,

foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without

any extra cost, where ever required as / if directed by

engineer in charge. [17] Permanent wiring with necessary

safety devices like RCCB in all circuit, Over Voltage Under

Voltage protection and THD eliminator in circuit for lift

machine room and lift well with proper numbers of light

points, with fixtures, exhaust fan and plug points shall be

provided by the agency. Only 3 phase Power Supply shall be

made available by department in lift machine room.

Necessary Earthing as per Lift Act/Rules shall be arranged by

[18] Any civil/ electrical works for additional and alteration

in lift shaft and machine room related to erection of lift shall

shall be provided.

[11] Car fan as per passenger capacity with automatic sleep

timer shall be provided. Total Amount

timer shall be provided. Total Amount

Item [12] Voice annunciator with suitable music shall be provided according

Item of work Quantity Unit to estimated

No. in lift car. In figure

[13] Self diagnostics system for operational and safety Rs. Ps.

parameters shall be provided in control panel.

[14] Mechanical over speed governor with governor

calibration as per actual site parameters and submission of

calibration certificate submission, door key holes in the floor

doors, fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine

room and monkey ladder for lift pit should be provided by

the lift agency, along with the other steel structure works,

foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without

any extra cost, where ever required as / if directed by

engineer in charge. [17] Permanent wiring with necessary

safety devices like RCCB in all circuit, Over Voltage Under

Voltage protection and THD eliminator in circuit for lift

machine room and lift well with proper numbers of light

points, with fixtures, exhaust fan and plug points shall be

provided by the agency. Only 3 phase Power Supply shall be

made available by department in lift machine room.

Necessary Earthing as per Lift Act/Rules shall be arranged by

[18] Any civil/ electrical works for additional and alteration

in lift shaft and machine room related to erection of lift shall

be made by lift agency without any extra cost.

(granite/marble fixing around all landing door openings are

not in lift agency’s scope.)

[19] Agency has to provide all working drawings and

documents and liaison services for obtaining all necessary

permission from lift inspector and other authorities. [20]

acrylic transparent licence/display A4 size holder in lift car

[20A] As per statutory requirement of Govt. Of Gujarat lift

& escalator act 2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift

inspection during/after lift erection and provide report by

third party authorized by concern licensing authority

5.agency has to provide third party insurance upto

completion of free maintenance period and submit the

document for the same.[21] Car Panel Operating Buttons

with floor position indicator/buttons must be of Auto Glow

type clearly visible when view from inside cabin.

[22] For Physically Handicapped person Full Length

Handrails of hairline finish steel grade of 304 should be

provided at appropriate height on the Rear & Side Wall

Panels in Lift Car. [23] With Necessary KVA rating voltage

[18] Any civil/ electrical works for additional and alteration Estimated

in lift shaft and machine room related to erection of lift shall Rates Total Amount

in lift shaft and machine room related to erection of lift shall Rates Total Amount

be made by lift agency without

Item ofany extra cost.

work Quantity Unit

No. In figure to estimated

(granite/marble fixing around all landing door openings are quantities

not in lift agency’s scope.)

1 [19] Agency has to provide all 2working drawings and 3 4 5

documents and liaison services for obtaining all necessary

permission from lift inspector and other authorities. [20]

acrylic transparent licence/display A4 size holder in lift car

[20A] As per statutory requirement of Govt. Of Gujarat lift

& escalator act 2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift

inspection during/after lift erection and provide report by

third party authorized by concern licensing authority

5.agency has to provide third party insurance upto

completion of free maintenance period and submit the

document for the same.[21] Car Panel Operating Buttons

with floor position indicator/buttons must be of Auto Glow

type clearly visible when view from inside cabin.

[22] For Physically Handicapped person Full Length

Handrails of hairline finish steel grade of 304 should be

provided at appropriate height on the Rear & Side Wall

Panels in Lift Car. [23] With Necessary KVA rating voltage

controlled Stabilizer suitable for your controller, drive and all

equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for

lift is in scope of work which rating is sugested by CEICED

Department (electrical Inspector)

(B) SPECIAL FEATURES DESCRIPTION OF

LIFTS for PREMIUM category 1. Advanced

control system dual 64 bit embedded microprocessor with

CANBUS Serial Communication mode including

Regenerative power efficient operation,on site programming

facility, Anti nuisance, Pte-opening, BMS/RMS with

necessary online real time monitoring system having

necessary connectivity for remote monitoring & other

suitable supporting hardware & software devices to fulfil the

purpose. 2. Floor Indication LCD Display with call

registration & brail mark with arrival gong and hall lantern &

TFT Screen in the car with MP3 Voice Announcer.

3. CAR Panel should be Scratch resistive SS

Moonrock finish / Hair Line / Honeycomb for car and all

Doors, All landing doors must have fire rating up to 2 hours

and car door must have multi-level crisscross beam door

protection. 4. To & fro communication system & wiring

(i.e. car , control room & guard room ) and Each elevator are

equipped with remote monitoring system.agency has to

provide mobile app and user id and password for monitoring

Handrails of hairline finish steel grade of 304 should be

provided at appropriate height on the Rear & Side Wall

Panels in Lift Car. [23] With Necessary KVA rating voltage

Rates Total Amount

Rates Total Amount

Item controlled Stabilizer suitable for your controller, drive and all according

Item of work Quantity Unit

No. equipments of lift. In figure to estimated

[24] Necessary rating of DP Elcb and FP Elcb required for quantities

lift is in scope of work which rating is sugested by CEICED

Department (electrical Inspector)

(B) SPECIAL FEATURES DESCRIPTION OF

LIFTS for PREMIUM category 1. Advanced

control system dual 64 bit embedded microprocessor with

CANBUS Serial Communication mode including

Regenerative power efficient operation,on site programming

facility, Anti nuisance, Pte-opening, BMS/RMS with

necessary online real time monitoring system having

necessary connectivity for remote monitoring & other

suitable supporting hardware & software devices to fulfil the

purpose. 2. Floor Indication LCD Display with call

registration & brail mark with arrival gong and hall lantern &

TFT Screen in the car with MP3 Voice Announcer.

3. CAR Panel should be Scratch resistive SS

Moonrock finish / Hair Line / Honeycomb for car and all

Doors, All landing doors must have fire rating up to 2 hours

and car door must have multi-level crisscross beam door

protection. 4. To & fro communication system & wiring

(i.e. car , control room & guard room ) and Each elevator are

equipped with remote monitoring system.agency has to

provide mobile app and user id and password for monitoring

8 / 10 Passengers, Ground plus 3 upper floor with

Rated Speed of 1.0 m/sec., (C) With General PLUS

ADDITIONAL SPECIAL FEATURES attached herewith.

Total Cost of Construction Cost

Rupees Five Crore Eighty Five lakh Sixty Two Thousand Four Hundred Seventy Four and Twenty Five Paise Only

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent

should be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out

*Estimated amount *Estimated amount

Put to tender Rs…58562474.25 Put to tender Rs.58562474.25

Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..….

Net Rs. …………………….… Total Rs. ………….…

The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

4 is a change as per actual mix design the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

R&B Sub Division R&B Division

Idar Himatnagar