Upgradation of Covering of main OPD Entrance towards Hospital for Creation of waiting area including allied works at Govt. Children Hospital Bemina

Creation of Faculity rooms with Possible washrooms in auditorium by way of alumunium / Brick Partitioning etc at Govt. Childrens hospital bemina

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing,panelling and dash fasteners to be paid for separately.) For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15).

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated

particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125x75x4 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :150x10 mm

Providing and Fixing Anodised Aluminium inbuilt door lock standard make and quality.

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): imported wood.

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

g such that LED Junction temperature shall not rise above 90°C).

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm thick.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). incl. carriaes of all material involved complete.

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand) incl. carriages of all material involved complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040mm bowl depth 178mm.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 16mm OD(SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

PPR Union 20mm dia

Providing and fixing PPR Unions PPR Union 32mm dia

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble (Area of slab over 0.5 sqm). 16mm.

Providing and Fixing C.P. Brass centre Hole bain mixer.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing toilet paper holder C.P. brass

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931.

Providing and fixing PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fitting arrangementof approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and Fixing C.P. Brass Health Faucet

Providing and Fixing o PVC Pipes type B incl. all fittings and fixtures. The job incl. all acessories.

100mm dia

75mm dia

100mm door tee

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete.

100-75mm reducer

75mm dia door bend

100mm dia socket

75mm dia socket

100mm dia floor trap.

75mm dia door tee

CCT 3000K/4000K/5700K/6000K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall he of relevant DIS standard complute In all respect 1/c connections with 1,5 sq mm FRLS, PVC Insulated copper conductor singla core cable and earthing etc. as required with Minimum 5 year OEM warranty, System lumen efficacy 2120 and <135 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-In-Chargo as per requirement. (Thermal management: heat sink of aluminum housin

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and Laying stone solling incl. compacting, watering excluding all carriages of all material involved complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) :Incl. carriages of all material involved complete.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing and Fixing of Track Dac powder coated sheet roofing incl. cost of screws, etc in roofs, walls, gables etc complte as per directions of engineer-in-charge.

Providing and Fixing of Powder coated ridges or hips of width 30cm overall width plain G.I. Sheet fixed with nails.

Providing and fixing plained eaves boarding 2nd class kail wood 250x32 mm (nominal size ).

Providing and fixing of 10mm thick Ready made wooden Panneling in sofits including cost of Budloow Wood Frame Work 50 x 40mm Section @ 600mm c/c bothways including cost of screws, etc in Soffits, walls, gables, etc complete as per directions of engineer in charge.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing and and fixing of 16mm dia HYSD 10.6 grade 350mm long bolt full thread with nuts and washers for anchoring the structure incl welding the bolts at bottom with 20 mm flat iron strip of at least 200mm long complete job.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge.

Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminum primer on both sides & edges, including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodized aluminum (with 15 micron anodic coating) Tsections 35 x15x1.5 mm size main runners, cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminum frame work shall be paid separately).

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately)..

Providing and fixing 6mm dia. G.I level adjusting hangers (upto 1200mm length) fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3mm size 60 mm long and stainless steel expandable dash fasteners 12.5 mm dia. 50 mm long complete as per direction of Engineer-in-charge.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm)

Providing and fixing factory made PVC door frames of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and jointed with two numbers of 150mm long brackets of 15x15mm MS square tube, the vertical door profiles to be reinforced with 19x19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using MS screws of 65/100mm size complete as per manufacturers’ specifications and directions of engineer-in-charge.

Providing and fixing 30 mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge,manufacturer’s specification & drawing. Pre-laminated PVC door shutters

Carriages of material by mechanical means (15 kmmt lead).

sand (15 km lead)

stone aggregate (15 km lead)

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

4x10 sqmm +2x6 sqmm earth wire for DB Submain wire

Electric

1 Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC Insulated coppar conductor single core

Group A (Primary Point)

1 Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC Insulated coppar conductor single core

5 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required as per IS standard

Supplying and fixing suitable size Gl box with modular plate and cover In front on surface or In recess, including providing and fixing 3 pln 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or în recess, including providing and fixing 2 nos. 3 pln 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings

8 Supplying and fixing suitable size GI box with modular plate and cover In front on surface or In recess, Including providing and fixing 6 pln 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc as required, as per IS standard

meter

Wiring for circuit/submaln wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (partially lald Conduit in slab) as per IS Standard.

2x15sqmm+1x1.5sqmm earth wire

2x2.5sqmm+1x2.5 sqmm earth wire

2x2.5sqmm+1x2.5 sqmm earth wire

2x4sqmm+1x4 sqmm earth wire for 16A power circuit point

Point Wiring

Fan / Light fixtures

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A "C" curve, SP, MCB, In sheet steal enclosure, on surface or In recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate świtch box Including connections but excluding modular plate etc.as.required.

Supplying and fixing following size/ modules, Gi box along with modular base &cover plate for modular switches in recess etc. as required

1 or 2 Module (75mm X 75mm)

3 Module (100 mmX75 mm

SUB-HEAD-II: DISTRIBUTION BOARDS

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, Interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4+12) double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circult breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, minlature circult breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required.

LED Flood Light, powder coated pressure die cast aluminum (System lumen efficacy ≥120 and <135 lm/Watt) Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminum body with bullt In or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 ha, Operating temp range-15 deg 1.16 DELHI SCHEDULE OF RATES (E&M) Volume-II 2025 14 to 50 deg centigrade, Internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%, THD <10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >80, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement deg, suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of Initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report.

SUB-HEAD-VII:SUPPLY OF LIGHT FIXTURES AND FANS

Supplying and fixing extra conduit down rad of 100 cm length G.l. plpe 15 mm dia, heavy gauge including painting etc. as required.

Supply, Installation, Testing and Commissioning of 300mm dla sweep PVC body, 900±10% RPM Exhaust fan with guard and mounting arrangement. Commercial series.

LED Panel light 2x2 ft. (System lumen efficacy 2120 <135 lm/Watt) Supplying, Installation, Testing & Commissioning of Panel light 2x2 ft, of following body material and construction as por IS: 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, Internal surga protection of 2.5 KV with Short & Open circult protection, THD < 10%, P. F.20.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circultry), of minimum 50000 Burning Hours with, 70% of Initial Lumen maintained till life ends, CT 3000°K / 4000°K /5700K/6000K/6500°K (As per ANSI BIn), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/Name Engraved/ Embossing/Screen printing on housing, complete in all respect i/c connections with 1.5 sq. mm FRLS, PVC Insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-In-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED Junction temperature shall not rise above 90°C). Powder coated die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm.

LED Downlighter (SMD Type) [System lumen efficacy 2120 Im/Watt), Supplying, Installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round/square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS: 10322 with driver as por the requirement with Driver efficiency>85%, Operating vnitage AC 140-270 Volt, freq 50/60 hz, Operating temp rango -15 dag to 40 deg centigrade, Internal surge protaction of 2.5 KV with Shart & Open circult protection, THD <10%, P. F.20.95, IP20, CRI >80, UGR (Unif

ied Glare Rating) <19, Flicker fren (flicker should be below 5%), life time (LED, Driver & electrical circultry), life time of minimum 50000 Burning Hours with, 70% of Initial Lumen maintained till life ends, CCT 3000°K/4000K / 5700°K /6000K/6500°K (As per ANSI Bin), SOCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specifled rating and Fixture shall be of relevant Bts standard and trade mark certificate (T.C.). Manufactures Word Mark/Name Engraved/Embossing/Screen printing on housing. DEM must have its own In house NABL lab setup for all testing facilities for LED fixtures. "complete In all respect 1/c connections with 1.5 sq. mm FRLS, PVC Insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy 2120 <135 Im/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium

Supply, Installation, Testing and Commissioning of 4ft Linear LED luminaire delivering an Initial system lumen of 2000 lumens & the luminaire shall be with system efficacy ≥ 100 lm/W. The luminaire Housing shall be made of CRCA & the diffuser shall be of polycarbonate/PMMA. The operating CCT shall be 5700K with CRI of 280. The luminaire shall be with BIS Registered electronic driver with Input voltage range of 150 to 270V, THD ≤ 10% & PF 2 0.95, 50,000 Hrs LED LIfe with L70 Criteria, IP20. The LED Driver shall be easily available In India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2kV.The luminaire shall be with following certifications: LM79 & LM80 Issued by LED manufacture along with Photo Blological Safety Standard, em lumens 1500. Similar to 15W WH RD or equivalent as per IS standard approved list of make.

Supply, Installation, Testing and Commissioning of art Linear LED Juminaira (Mirror light) deltvering an Initial system lumen of 003 lumans & the luminaire shall be with system efficacy ≥ 90 lm/W. The luminaire Housing shall be made of FC & the diffuser shall be of polycarbonate/PMMA. The operating CCT shall be 6500K with CRI of 280. The luminaira shall be with BIS Registered electronic driver with Input voltage range of 150 to 270V, THD≤ 20% & PF>0.95, 50,000 Hrs LED LIfe with 170 Criteria, IP20. The LED Driver shall be easily available In India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV. Tha luminaire shall be with following certifications: LM79 & LM80 Issued by LED manufacture along with Photo Blological Safety Standard. (equivalent as per IS standard. (approved list of make).

Supplying, laying, testing and commissioning of XLPE Insulated, PVC Inner sheathed, armoured, PVC outer sheathed, aluminlum conductor cable of size 3,5 core x35 sq mm, 1.1 kV grade, conforming to 15:7098 (Part-1) with ISI marking, including transportation, unloading, laying in trenches/trays/ducts with sand cushioning and protective covering of bricks/tiles and warning tape, dressing and clamping, providing end terminations with brass double compression glands and aluminium lugs, earthing of armour, Jointing (if required), Insulation resistance and HV testing, ferruling/marking, route markers and all consumables, labour and accessories, complete in all respects as required and directed by Engineer-In-Charge.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part Il complete with fitting and cutting, jointing etc. In the existing trench, complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)