MID/AN/113

Repair to 4.5 cusec discharge, 60 mtrs head HC pump coupled with 150 HP motor unit No. 01 &03 installed at LIS Thandapani. The job involves decupling of pump from motor, removing from base, shifting by implying manual labour to road side, loading in mechanical transport and shifting to work shop and unloading there. Complete dismantling of the pump. Strengthening of pump shaft by welding, turning and finishing to make bearing size. Providing and fitting of new impeller as per size, providing and fitting of CI sleeve to bearing houses for proper fitment of bearing. Fabrication of 2 Nos neck rings for proper fitment of impeller in the body, repair to bearing brackets, providing and fitting of 02 Nos bearings and 02 Nos bushes. Assembling of pump parts, shifting back to the site if LIS, fitting of pump body with pump by providing/ fitting of new body gaskets, studs, bolts and nuts, coupling with motor and testing. Complete job includes cost of material, labour charges, hire charges of tools and tackles required for the job and transportation charges etc. Complete job

Complete rewinding of 150 HP motor of pumping unit No. 1 with allied work at LIS Thandapani. The job involves disconnecting of motor, decupling the motor from the pump, removing from base plate, lifting the motor with the help of chain pulley block out of the pump house. Shifting of motor from LIS to workshop by head load and mechanical transport. Complete rewinding of 150 HP motor including cost of wire and skilled labour charges. Reinstalling the motor at its installed position making of electrical connection, alignment with pump, testing of motor on full load. job includes cost of material cost and labour charges for skilled and semi-skilled labour. Complete job

Repair/strengthening of 375 mm dia, C.I single door type NRV installed at delivery line of LIS, Thandapani by way of disengaging the valve from delivery pipe by unfastening/cutting the nuts & bolts of flanges & then dismantling and separating all components of NRV. Cleaning of NRV from mud and silt. Fabrication of new support rod in place of damaged rod & hinges arrangement by way of replacement/rebuilding of worn-out parts for proper alignment of door flap in the body seat to check downward flow of water. Rethreading the oversize holes of top cover using suitable tap. Assembling the NRV & fitting top cover plate with insertion of R.I sheet packing & new bolts and washers in place of worn out damaged bolts. Checking for leakages. Priming the pump and testing/commissioning on full load. The job includes the cost of material, labour, to & fro transportation of LIS, Thandapani. Complete Job

M/S FASTTRACK ENGINEERS

Rishabh Electricals and Mechanical Works